Hpi Pro 4
#6391
Tech Champion
iTrader: (9)
Originally posted by Trinity2
I just need the new gear set ver 1.1 for my Pro4, but i can`t find any from RC Model HK
They only sell that 75190 one-way gear brace
I need bouth of them to make that front diff stronger... wright?
I just need the new gear set ver 1.1 for my Pro4, but i can`t find any from RC Model HK
They only sell that 75190 one-way gear brace
I need bouth of them to make that front diff stronger... wright?
if you have lots of version 1 gears get the PRP diff plate.. I think it's better than HPI's... the Plate covers the entire gear.
#6392
sportracer: You should be able to call HPI USA Customer Service and get an updated gear set with the one-way brace at (949) 753-1099. They have update kits that include 2 sets of the new gears, the new 0.1mm copper shims and the purple one-way brace. Definitely call them up and explain you’re a Pro 4 owner that has the old version gears.
Aku-Man: Hopefully my PM covered everything. Let me know if it didn’t.
Aurra Sing: The Pro 4 is definitely capable on Carpet. I would look at our Optional 3mm Chassis and also the Optional 2.5mm Upper Deck upper deck for a full time carpet ride. Together they retail for $97, but should be much lower than that at most shops (maybe around $80).
brushless: Check your one-way also. If your diff screw was broken, the front wheels would still move (you mentioned no drive at all). If not, then check your input shafts and pins. As other have suggested, the gear mesh may be too loose also… which would definitely produce a clicking noise if the teeth are skipping over each other.
Trinity2: If you got your car in the US (kit#185), give HPI USA customer service a call about the new gears and the one-way brace.
-E
Aku-Man: Hopefully my PM covered everything. Let me know if it didn’t.
Aurra Sing: The Pro 4 is definitely capable on Carpet. I would look at our Optional 3mm Chassis and also the Optional 2.5mm Upper Deck upper deck for a full time carpet ride. Together they retail for $97, but should be much lower than that at most shops (maybe around $80).
brushless: Check your one-way also. If your diff screw was broken, the front wheels would still move (you mentioned no drive at all). If not, then check your input shafts and pins. As other have suggested, the gear mesh may be too loose also… which would definitely produce a clicking noise if the teeth are skipping over each other.
Trinity2: If you got your car in the US (kit#185), give HPI USA customer service a call about the new gears and the one-way brace.
-E
#6394
Is there any back-up in the UK for people with the version 1 gears and without the one-way brace?
#6395
Tech Master
Hmm, maybe a fully loaded car?
HPI has an R40 2004 Edition. Has many many upgrades on it.
HPI has an R40 2004 Edition. Has many many upgrades on it.
#6397
Registered User
Aku-Man: Hopefully my PM covered everything. Let me know if it didn’t.
#6398
Registered User
HPI coming out more new hop-ups for pro4 at HPI Japan. Go check.
#6399
Tech Champion
iTrader: (9)
Originally posted by Aku-Man
HPI coming out more new hop-ups for pro4 at HPI Japan. Go check.
HPI coming out more new hop-ups for pro4 at HPI Japan. Go check.
here's the link...
http://www.hpiracing.co.jp/contents/...tion/0408.html
#6400
0o0o0 I like the look of that purple central brace
#6401
rc-zombies: I haven't heard about a summer campaign version??? It has the same part # as the orginal Japan version, so sounds kinda odd Now if we could only make the #189 E-Type (Erik Version )
Skill: either give HPI Europe a call, or check with your hobby shop or distributors.
Skill: either give HPI Europe a call, or check with your hobby shop or distributors.
#6402
Tech Champion
iTrader: (9)
Originally posted by Erik Shauver
rc-zombies: I haven't heard about a summer campaign version??? It has the same part # as the orginal Japan version, so sounds kinda odd Now if we could only make the #189 E-Type (Erik Version )
Skill: either give HPI Europe a call, or check with your hobby shop or distributors.
rc-zombies: I haven't heard about a summer campaign version??? It has the same part # as the orginal Japan version, so sounds kinda odd Now if we could only make the #189 E-Type (Erik Version )
Skill: either give HPI Europe a call, or check with your hobby shop or distributors.
put me down for one E-type kit...
#6403
What cause the glitching? I ran the car with Quantum2 and Airtronics reciver. There is only one spot on the track that I I always lost the control. What would be your wild guess?
#6404
Tech Regular
Thanks Erik just got off the phone with HPI had to be the best customer service expirence that I've ever had.
#6405
Tech Master
iTrader: (13)
DITTO!
Originally posted by sportracer
Thanks Erik just got off the phone with HPI had to be the best customer service experience that I've ever had.
Thanks Erik just got off the phone with HPI had to be the best customer service experience that I've ever had.
BTW, has anybody seen the HPI spring kit out yet or even the individual springs? I do know that you can use Xray or AE, but I wanted to stay with HPI.
Thanks, Mike