1/12 RS12G Atsushi Hara Replica
#91
Barry: I like ur racing shoes! and ur Racing hairdo!!! Its so cool man.
#92
speedxl, Thanks. So I remove "SS" and leave the "G"?
Wilfred. Thanks. It takes a lot of effort to look so cool!
Wilfred. Thanks. It takes a lot of effort to look so cool!
#93
barry there should be no g even for the ssg
example : sp 2345 ss
the none ssg part would be
sp 2345 ( no ss)
ok! by the way the shoes are the bomb!
example : sp 2345 ss
the none ssg part would be
sp 2345 ( no ss)
ok! by the way the shoes are the bomb!
#94
Tech Elite
iTrader: (21)
Originally posted by Barry White
speedxl. Well, I went to Japan with the Tamiya World Championships. I bought almost every Yokomo chassis parts but my problem is that the countersunk holes arn't well drilled so I have to buy some countersunk bits, pfffff... (Ps, I also bought a Associated kit in Hong Kong). I still have some parts missing like the Yokomo T-bar ball mount. I downloaded the Yokomo manual but it is in Japanese. Could you list the part numbers and if possible the part numbers for the black carbon parts (chassis 2002 model, chassis brace, motor pod upper and lower deck)
Thanks,
Muhannad
speedxl. Well, I went to Japan with the Tamiya World Championships. I bought almost every Yokomo chassis parts but my problem is that the countersunk holes arn't well drilled so I have to buy some countersunk bits, pfffff... (Ps, I also bought a Associated kit in Hong Kong). I still have some parts missing like the Yokomo T-bar ball mount. I downloaded the Yokomo manual but it is in Japanese. Could you list the part numbers and if possible the part numbers for the black carbon parts (chassis 2002 model, chassis brace, motor pod upper and lower deck)
Thanks,
Muhannad
i think you will remember me from the tamiya worlds, i most definatly remember you ( or rather your antics, jumping from the elevators, toothpicks in the teeth, etc... )
what is david doing now..? i have kept in touch with a few australians, but very few others. you should send me an email and let me know whats up!
peter robinson (GT1 usa 2002)
#97
Hi peter, Difuser, it's the European Championship this weekend but I wasn't qualified and the Belgian importer doesn't want to pay for my hotelroom so nobody will have an advantage from my help .Pfffff... Well hell.
David became a proud father of a boy this monday!. We are still going to the European Championships as spectators this sunday. We are leaving at 2 a.m. on David's new Ducati Monster bike to get in the U.K. before the racing starts.
David became a proud father of a boy this monday!. We are still going to the European Championships as spectators this sunday. We are leaving at 2 a.m. on David's new Ducati Monster bike to get in the U.K. before the racing starts.
#99
barry dont make me bring out my gsxr 1100 .
#100
chieken!
#101
What a trip. When we came in the U.K. their was a very long piece of highway without a gas station, so of course we ran out of gas and had to push the bike for 8km uphill. I still can't move my legs. What do you want. 900km on the backseat of a Ducati in one day.
#102
hey barry, i have something that I think you would be the right person to answer for me, I tried emailing you through here, but It was denied, if you could pm with your email addy, or email me at [email protected]
thanks,
thanks,
#104
This car will probably come out as a conversion made by the HARA product line as a kit for the Yokomo car.
#105
barry i got the quad 12 car conversion this guy is makiing the car to work without tape and uses a batt brace.
he's got the thicker ssg material and the black stuff to its similar to the yokomo chassis it 2.5mm and will work good on carpet i ll be trying it at a state series championship race this weeked i am going to hope for the best maybe if they come out with the conversion for pivot rear end this guy will make one too, go to the 12 scale forum here a take a look at d powell posts with the pictures.
rby the way did you run the part# thru and did you order what you needed.
he's got the thicker ssg material and the black stuff to its similar to the yokomo chassis it 2.5mm and will work good on carpet i ll be trying it at a state series championship race this weeked i am going to hope for the best maybe if they come out with the conversion for pivot rear end this guy will make one too, go to the 12 scale forum here a take a look at d powell posts with the pictures.
rby the way did you run the part# thru and did you order what you needed.