HPI Micro RS4
#376
OK....did some work on the car... bought speed300 but...it will not fit!? the motor mount holes are difference! Any one have any idea?
#377
you can't use stock motor plate for speed300. ARM has plate specially for speed300...or you can do it custom made. Something like this
hope this helps
hope this helps
#378
Tech Rookie
SWEET
JUST GOT THE BEETLE CUP KIT IN.REPORT BACK LATER.COO
#379
Tech Adept
superk-i did the same thing. i got the motor tried to put it in and i found the holes to be different. so it stuck the mount in a vise and machined(drilled) away! its a good cheap fix as i went racing today and did good.probably tomarow i will be ordering a motor plate(for speed 300) and some other things from team speedster( www.teamspeedster.com ). hope this helps
#380
Tech Fanatic
iTrader: (1)
Have a question??
I have a Micro with the Ratzazz Chassis, speed 300 motor 11t pinion, v12 speedo,5 1800nimh batts,stock tires (asst) Well here is my problem. I am running it on Ozite carpet and the darn thing hops one way (to the right) I have tried tires wheels battery placement, oil filled shock on the rear, speedo placement and rec. I cannot get it to stop HELP please. Oh by the way not a beginner racer. Just thought I'd throw that in Check out my Website www.seidkracing.com Also does anyone have any motor pods they want to sell or other parts. LMK Thanks Eric.B aka Dotjumper
#381
Tech Adept
Sounds like it might be just the carpet.. Where I race we have the same thing the carpet actually make the car track funny . Try to Take the course a different direction and see if it changes. Also, What I have noticed is that if you Widen the wheel width to the widest setting it will help track a little striaghter. As well a trying the 150mm setting.
#382
Here is my Micro!
It seem nice! Just like Darkseid car!...
#383
Suspended
ABC/DTM Micro
Anyone else have an ABC/Dtm Micro car?
It is built just like a 1/10 pan car, I have one and boy is it fast!
It is built just like a 1/10 pan car, I have one and boy is it fast!
#384
Tech Rookie
MICRO ALMOST FINISHED
Waiting on the radio/servo/receiver!I'll take pics later color came out a little dark!I was looking for a platinum grey and only found charcoal grey the micro is closer to black than my plat.20002 vw turbo s.but the car does look good,im my opinon.
#385
Tech Rookie
what s the differance between brushless and coreless motors, the team orion coreless motor that i am getting, how dose it differ from the novak brush less system?
thnaks
thnaks
#386
Tech Rookie
micro penguin chassie
how do people feel anout the lemans type of the penguin 3500 micro chassie. haow dose it compare to other chassies, namely the team epic. i have a team orion coreless motor, standard and hpi micro modified. i am hopeing to try out some foam tires but may settle for the hpi high preformance rubbers. i really want this chassie but i would like to know the ups ad downs of owning this chassie.
thanks alot
thanks alot
#387
Tech Rookie
micro penguin chassie
oops sorry
thanks alot
thanks alot
#388
GH New Product in stock
Hi guys,
I have just received the new products from GH. They are:
Alum. Front Upper Mount Arm (in Blue, Silver & Purple)
New Alum. Steering Block (in Blue, Silver & Purple)
Alum. 300 size Motor Plate (in Blue & Purple0
All can be found at the store now!
Vince
www.microRCshop.com
Hi guys,
I have just received the new products from GH. They are:
Alum. Front Upper Mount Arm (in Blue, Silver & Purple)
New Alum. Steering Block (in Blue, Silver & Purple)
Alum. 300 size Motor Plate (in Blue & Purple0
All can be found at the store now!
Vince
www.microRCshop.com
#390
Tech Champion
iTrader: (22)
Mr rc: i have a dynamite rocket racer, which i think is the same as the abc car. I think it could be a very fast car if it had better tires and a front suspension which did not bind up. the steering knuckles flex and bind on the kingpins. Do you know where you can get parts and options for this car?