Alex Racing Barracuda R2 & R3
#8162
Regional Moderator
iTrader: (4)
Originally posted by rc-zombies
not a whole lot...just what has been mentioned here....
starting off with 50wt all around, hard shortspan arms.
zero toe front
3deg rear.
Rayspeed springs: red/f...white/r
shocks outer hole on tower front
second to outer hole on rear tower.
no spacers under front arms.
if you have a good set-up for rubber tires on Carpet ...please let me know so I don't spend hours trying to get the car dialed...
not a whole lot...just what has been mentioned here....
starting off with 50wt all around, hard shortspan arms.
zero toe front
3deg rear.
Rayspeed springs: red/f...white/r
shocks outer hole on tower front
second to outer hole on rear tower.
no spacers under front arms.
if you have a good set-up for rubber tires on Carpet ...please let me know so I don't spend hours trying to get the car dialed...
#8164
Tech Master
iTrader: (1)
Originally posted by rc-zombies
not a whole lot...just what has been mentioned here....
starting off with 50wt all around, hard shortspan arms.
zero toe front
3deg rear.
Rayspeed springs: red/f...white/r
shocks outer hole on tower front
second to outer hole on rear tower.
no spacers under front arms.
if you have a good set-up for rubber tires on Carpet ...please let me know so I don't spend hours trying to get the car dialed...
not a whole lot...just what has been mentioned here....
starting off with 50wt all around, hard shortspan arms.
zero toe front
3deg rear.
Rayspeed springs: red/f...white/r
shocks outer hole on tower front
second to outer hole on rear tower.
no spacers under front arms.
if you have a good set-up for rubber tires on Carpet ...please let me know so I don't spend hours trying to get the car dialed...
I was helping Chris get a good rubber tire setup for Stockton. The Rayspeed red spring is right on for the front. But you may be running a little too stiff in the rear (Rayspeed white = 17.17 lb/in). You might be better off running a softer rear spring like a rayspeed yellow (14.87) or even the stock Alex racing spring (14.39).
#8165
Tech Champion
iTrader: (9)
Originally posted by linger
Mr. Zombie,
I was helping Chris get a good rubber tire setup for Stockton. The Rayspeed red spring is right on for the front. But you may be running a little too stiff in the rear (Rayspeed white = 17.17 lb/in). You might be better off running a softer rear spring like a rayspeed yellow (14.87) or even the stock Alex racing spring (14.39).
Mr. Zombie,
I was helping Chris get a good rubber tire setup for Stockton. The Rayspeed red spring is right on for the front. But you may be running a little too stiff in the rear (Rayspeed white = 17.17 lb/in). You might be better off running a softer rear spring like a rayspeed yellow (14.87) or even the stock Alex racing spring (14.39).
#8166
Tech Adept
regarding rayspeed springs
I see alot of the R2 guys using RaySpeed springs.
which ones do I need to get for my R2
Any part #'s, colors would be great
Thanks
Jim C
which ones do I need to get for my R2
Any part #'s, colors would be great
Thanks
Jim C
#8168
Tech Champion
iTrader: (9)
Re: regarding rayspeed springs
Originally posted by JIMC
I see alot of the R2 guys using RaySpeed springs.
which ones do I need to get for my R2
Any part #'s, colors would be great
Thanks
Jim C
I see alot of the R2 guys using RaySpeed springs.
which ones do I need to get for my R2
Any part #'s, colors would be great
Thanks
Jim C
Red for front
White for rear (aspalt)
Yellow for rear (carpet)
#8170
R/C Tech Elite Member
iTrader: (47)
Originally posted by rc-zombies
I guess no carpet racing tonite....
gotta do some last minute shopping... my co-workers gave me gifts today..and I wasn't planning on giving mine 'til tommorrow...
like a little kid...just had to take a peek at what they gave me....
so to say the least... didn't want to look cheap with the stuff I already purchased... just gotta add a few extra nick-nacks...
I guess it's for the better...the weather outside is horrible...winter rain storm coming through
Hopefully Saturday I can try to hit the track...
Merry Christmas Everyone!!!!!!
I guess no carpet racing tonite....
gotta do some last minute shopping... my co-workers gave me gifts today..and I wasn't planning on giving mine 'til tommorrow...
like a little kid...just had to take a peek at what they gave me....
so to say the least... didn't want to look cheap with the stuff I already purchased... just gotta add a few extra nick-nacks...
I guess it's for the better...the weather outside is horrible...winter rain storm coming through
Hopefully Saturday I can try to hit the track...
Merry Christmas Everyone!!!!!!
#8172
Re: Re: regarding rayspeed springs
Originally posted by rc-zombies
you'll only need 3 pairs...
Red for front
White for rear (aspalt)
Yellow for rear (carpet)
you'll only need 3 pairs...
Red for front
White for rear (aspalt)
Yellow for rear (carpet)