5LikesAlex Racing Barracuda R2 & R3
08-21-2003, 09:17 AM
#3468
Originally posted by Randman
What all does the alex set come with anyway?
What all does the alex set come with anyway?
#5 Flathead screwdriver
#4 Flathead Screwdriver
#2 Phillips
#1 Phillips
#0 Phillips
7.0mm Socket
5.5mm Socket
5.0mm Socket
4.5mm Socket
2.5mm Hex
2.0mm Hex
1.5mm Hex
0.05in Hex
T-10 Hex
Hard part is getting replacements. Would like to get a 1/16in. hex for Robinson Pinions.
08-21-2003, 09:33 AM
#3470
Originally posted by Randman
Nice set, I didn't realize it had all those. You can still use the 1.5 for pinions, just risk stripage..
Nice set, I didn't realize it had all those. You can still use the 1.5 for pinions, just risk stripage..
Would like to a matching Alex 1/16"... if not, I guess my old Integy one will have to do...I can always have the handle re-anodized Orange.
08-21-2003, 10:08 AM
#3472
Originally posted by Randman
What would you use a .05 hex wrench for? That's really small...
What would you use a .05 hex wrench for? That's really small...
08-21-2003, 10:08 AM
#3473
Originally posted by Randman
What would you use a .05 hex wrench for? That's really small...
What would you use a .05 hex wrench for? That's really small...
The tools and case was a bargain... something I couldn't pass up... only $75.00 more with the WEB.
The Case alone is listed on Alex website for $129usd.
08-21-2003, 10:26 AM
#3475
Originally posted by rc-zombies
Don't know...haven't used it yet...
The tools and case was a bargain... something I couldn't pass up... only $75.00 more with the WEB.
The Case alone is listed on Alex website for $129usd.
Don't know...haven't used it yet...
The tools and case was a bargain... something I couldn't pass up... only $75.00 more with the WEB.
The Case alone is listed on Alex website for $129usd.
08-21-2003, 10:33 AM
#3476
so far the 2.5, 2.0, and 1.5mm hex fit perfectly. no slop.
time will tell on how long they will hold up. But I think they will last a long time.... looks like Vandium chrome shafts with hardened tips. Too bad the tips are not user replacable like Hudy's and others.
time will tell on how long they will hold up. But I think they will last a long time.... looks like Vandium chrome shafts with hardened tips. Too bad the tips are not user replacable like Hudy's and others.
08-21-2003, 10:35 AM
#3477
Originally posted by rc-zombies
Just get one of these:
1 of 2 in the US
Just get one of these:
1 of 2 in the US
I guess I gotta go anodize all my HUDY tools. That's a lot ya know. LOL
Dan
08-21-2003, 10:35 AM
#3478
Originally posted by rc-zombies
so far the 2.5, 2.0, and 1.5mm hex fit perfectly. no slop.
time will tell on how long they will hold up. But I think they will last a long time.... looks like Vandium chrome shafts with hardened tips. Too bad the tips are not user replacable like Hudy's and others.
so far the 2.5, 2.0, and 1.5mm hex fit perfectly. no slop.
time will tell on how long they will hold up. But I think they will last a long time.... looks like Vandium chrome shafts with hardened tips. Too bad the tips are not user replacable like Hudy's and others.
08-21-2003, 10:37 AM
#3479
In case you have notice
Our banner is up and running. 
Lets have some feedback on what do you think?
Dan
Lets have some feedback on what do you think?
Dan
08-21-2003, 10:40 AM
#3480
Tech Master
Re: Re: Pal A-spec
Originally posted by JDM_DOHC_SiR
Good Luck getting it to Hong kong Bro...
The owner of PAL dosen`t sending his Products there due to the fast that "product D" made a close copy of PAL`s older OneFlag stuff and.. He`s kind of burt on the whole deal...but if you can get it that would be good for you....let us know how everything works out.... but I think you`ll have a hard time getting it there
-Dave
Good Luck getting it to Hong kong Bro...
The owner of PAL dosen`t sending his Products there due to the fast that "product D" made a close copy of PAL`s older OneFlag stuff and.. He`s kind of burt on the whole deal...but if you can get it that would be good for you....let us know how everything works out.... but I think you`ll have a hard time getting it there -Dave