T.O.P. Racing "Scythe" 1/10 EP Touring Car
#901
Is there any coverage for the event that etrachter, EJ and Josh are running at ???
#902
Tech Elite
iTrader: (101)
Razzor,
They are at the Roar Carpet Nationals in Omaha, Nebraska. There is a thread stickied to the top on the Electric main forum page. There is a link to Liverc.com which shows you the laptimes while they are racing. You can go to the site now and see results. It appears to be slightly messed up right now. Is that what you were looking for?
HTH,
Steve
They are at the Roar Carpet Nationals in Omaha, Nebraska. There is a thread stickied to the top on the Electric main forum page. There is a link to Liverc.com which shows you the laptimes while they are racing. You can go to the site now and see results. It appears to be slightly messed up right now. Is that what you were looking for?
HTH,
Steve
#903
Thanks for that.
#904
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
I want to run a double one way ( I liked it when I ran the X-ray ) can I put in the X-ray 008 layshaft oneway?
#905
I've got a one-way in at the moment but do have a spool. I run carpet rubber, would running the spool be better?
#906
For me, the spool runs great on carpet/rubber. Loads of steering and stable with it. But I can't get along with one-ways at all.
#908
Tech Fanatic
well guys the 2008 carpet nats are over and id like to say congratulations to josh cyrul for tqing and winning superstock with a hacker motor, e.j. evans finished up in third in 13.5 rubber good job to him and i ended up in 4th me and e.j. actually tied but he won the tiebreaker it was an awesome event and alot of fun hangin with the team again ill post my spool set up for you guys when i get home tomorrow or tuesday later jason
#909
Tech Champion
iTrader: (9)
Is there any posted information about the Hacker motors?
We were playing with the original Hacker motors and controllers a good 5 years ago, they were awesome for their time, but i have not heard anything from them in quite a while.
Also what speedies was Josh using to run them?
We were playing with the original Hacker motors and controllers a good 5 years ago, they were awesome for their time, but i have not heard anything from them in quite a while.
Also what speedies was Josh using to run them?
#910
Tech Champion
iTrader: (1)
well guys the 2008 carpet nats are over and id like to say congratulations to josh cyrul for tqing and winning superstock with a hacker motor, e.j. evans finished up in third in 13.5 rubber good job to him and i ended up in 4th me and e.j. actually tied but he won the tiebreaker it was an awesome event and alot of fun hangin with the team again ill post my spool set up for you guys when i get home tomorrow or tuesday later jason
#911
Tech Rookie
Congratulations at ROAR 2008!!
Congrats to T.O.P. Racing Team (Josh Cyrul) for winning and TQing the ROAR Carpet Nats 10.5T Foam and getting 3rd (EJ Evans) and 4th (Jason Ertrachter) place on the ROAR Carpet Nats 13.5T Rubber.
Good going guys!!
Good going guys!!
#912
Tech Master
iTrader: (22)
Congrats from my end of the line also, its fantastic to see the Scythe getting the results and credibility it deserves.
Very much looking forward to the larger meets here in Aus to see if we can get some results for the Top Team here also.
Cheers,
Robbie
PS: any pics of the TOP racers and cars from the event???
Very much looking forward to the larger meets here in Aus to see if we can get some results for the Top Team here also.
Cheers,
Robbie
PS: any pics of the TOP racers and cars from the event???
#913
08 Nats
Thanks everyone!
I want to congratulate Josh again for winning the 19 turn class (Super Stock) against a tough field. Definitely a job well done! He's putting a race report together and will post it when he has time.
Finishing Order
Cyrul, Josh (1)
Darroch, Ray (1)
Ellis, Andrew (1)
Hebert, Keven (1)
Hohwart, Rick (1)
Dayger, Jeff (1)
Schreven, Travis (1)
Bradley, TJ (1)
Shank, Darren (1)
Rossi, Steve (1)
Jason and I did pretty well in 13.5 rubber class. In the third A main I caught the leader when he put it into the board. We tangled when he was trying to turn his car around, so I ended up finishing up 3rd in that main and 3rd overall. Jason's car was very good (better then mine), I'm sure he'll post his setup when he has time.
Finishing Order
Hohnstein, Josh (1)
Stanton, Brian (1)
Evans, E.J. (1)
Ertrachter, Jason (1)
Howard, Matthew (1)
Aveytia, Juan (1)
Ehrlich, Dave (1)
Taskila, Jari (1)
Simon, Scott (1)
Witteman, Mitch (1)
We also had two guys in the B in 13.5. Overall pretty good results in the 2008 ROAR Carpet Nationals. I'll post some pics soon.
I want to congratulate Josh again for winning the 19 turn class (Super Stock) against a tough field. Definitely a job well done! He's putting a race report together and will post it when he has time.
Finishing Order
Cyrul, Josh (1)
Darroch, Ray (1)
Ellis, Andrew (1)
Hebert, Keven (1)
Hohwart, Rick (1)
Dayger, Jeff (1)
Schreven, Travis (1)
Bradley, TJ (1)
Shank, Darren (1)
Rossi, Steve (1)
Jason and I did pretty well in 13.5 rubber class. In the third A main I caught the leader when he put it into the board. We tangled when he was trying to turn his car around, so I ended up finishing up 3rd in that main and 3rd overall. Jason's car was very good (better then mine), I'm sure he'll post his setup when he has time.
Finishing Order
Hohnstein, Josh (1)
Stanton, Brian (1)
Evans, E.J. (1)
Ertrachter, Jason (1)
Howard, Matthew (1)
Aveytia, Juan (1)
Ehrlich, Dave (1)
Taskila, Jari (1)
Simon, Scott (1)
Witteman, Mitch (1)
We also had two guys in the B in 13.5. Overall pretty good results in the 2008 ROAR Carpet Nationals. I'll post some pics soon.
#914
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
Congrats to all the Tip-TOP racers at the carpet Nats!!!
EJ, that would explain why you haven't answered my email... Kinda busy huh?
EJ, that would explain why you haven't answered my email... Kinda busy huh?
#915
Tech Fanatic
when i get home from work ill post my setup for you guys i ran a spool e.j. ran a one way so are setups are a little different but ill definately get it up here for you guys tonight see you jason