Some may be. You may only find out by trying them if the opportunity presents itself. That's how I repaired one of my 1/8 scale buggies; by using parts from a different manufacturer due to discontinued/out-of-stock parts. Desperate times call for desperate measures.

I'm right behind you.... I just placed my order today :D

I also compared them side by side and tried a few Xray parts to see but they did not fit. So my answer would be no, XB4 parts will not fit the ER-14. There may be a few that do, but most are different and will not work without a bunch of modifications.

ER14
 

should get to put some laps on it this weekend. gonna try out two new wheelers this weekend-good friend hooked me up with a losi 22-4 also.

The ER-14 is basically a 1/10th scale version of the INTECH 1/8 BR-6E E-Buggy, it's not a copy of any other 1/10 buggy.

http://www.dialedhobbies.com/images/...duct/br-6e.jpg

awesome some one near by to swap setup info with.
gonna start building it in lil while and hopefully make it to thornhill on sunday.

will the kit take saddle packs or shorty only? I see there are a couple of pics with saddle packs and some with shortys.

I'm really bummed my daughter has a volleyball tournament tomorrow so I'm gonna have to miss the grand opening race @ TRCJ, I spent a lot of time helping build the new driver stand and building. I'll be racing on-road at HobbyTown North on Sunday. After I get my ER-14 put together, I'll have to come down to RCHQ on the next WXE you can make... do they run 1/10 4WD there?

I believe the kit only comes with the shorty pack tray, however they list an optional part here for the saddle setup:
http://www.dialedhobbies.com/account...4-12-26-detail

http://www.dialedhobbies.com/images/...uct/100140.jpg

I got mine in yesterday will be doing the build next week. Looking forward to trying this one out.

Im gnna skip the grand openin race,want to run my nitros.
Yep 1/10 4wd & 2wd buggy is growin at rchq,especially @wxe.

New Arrivals at INTECH - ER-14 & ERSC-10
 

https://fbcdn-sphotos-g-a.akamaihd.n...04551241_o.jpg

Are you ready for the ER-14 and ERSC-10 in 2015?

Intech Racing is very excited to release these two cars, ER-14 and ERSC-10.
We are successful in extending our product line to offer more quality choices for customers.:nod:

A detailed specification with all the finest details is available on line at www.intechracing.com.
Please do not hesitate to contact your local distributors and let’s rock at track!

for anyone interested a savox full size servo will fit the car with a 1mm spacer behind it.

Got mine together in time for a local club race, Perfect for a first run shakedown. This car is stinkin' GOOD! Going to try some diff. fluid changes this weekend.

I hope you enjoy it at track! :)