|
Originally Posted by Intech BR-6
(Post 14032238)
One trick I have done is replace the front arm spacer with a shock o-ring.
|
Originally Posted by Intech BR-6
One trick I have done is replace the front arm spacer with a shock o-ring.
Originally Posted by WillS
(Post 14032991)
In all my years this might be the smartest modification I have seen. Good looking out for the fellow racers!
|
I also do this on my 1/8 BR-6 buggies, but I use a P4 size o-ring. I use them for the arm and rear upright spacers. It takes up the slop without binding. :nod:
http://scontent-atl1-1.xx.fbcdn.net/...43967420_o.jpg |
I would have to imagine having less parts wear with no plastic rubbing on plastic... do you lubricate the o-rings too, or run them dry?
|
Originally Posted by billdelong
(Post 14033434)
I would have to imagine having less parts wear with no plastic rubbing on plastic... do you lubricate the o-rings too, or run them dry?
|
makes sense, thanks!
|
Definitely want to try the o-ring idea.
Not to highjack the thread - but there is a great product Dry Fluid Extreme (PM me for more details, since this isn't the place). It provides great lubrication properties for bearings, ball joints, any metal to metal or plastic to plastic contact points. But it dries, not like Teflon and oil that attrach dirt. Unfortunately, rained out after one run today, but so far, car and parts have been durable on my end -- and I have been known to break a part or two :sneaky::sneaky: |
Will Smith Joins INTECH in 2015!
http://www.intechracing.com/gct_admi...5295164545.jpg
Intech Racing is pleased to announce that Will Smith has signed a 2-year contract and joined the Team Intech Racing USA for the 2015 season! Will Smith is good at setting up cars and ready to run with Intech ER-14, a 4wd 1:10 scale E-Buggy. Looking forward to seeing the nice performance from Will! |
Congrats Will.
|
Lee takes 2nd with the ER-14 at SS Raceway.
http://www.intechracing.com/gct_admi...5622141048.jpg
Lee Setser finished 2nd with the ER-14 at SS Raceway. Congratulations! |
Luca Albanese, one of Intech Italian drivers, tried to find the best setup for the ER-14.
https://fbcdn-sphotos-f-a.akamaihd.n...28522712_o.jpg https://fbcdn-sphotos-d-a.akamaihd.n...14728085_o.jpg |
Gene Hickerson takes TQ & 1st with the ER-14 at Roar Region 4 Champs!
http://www.intechracing.com/gct_admi...6162162411.jpg
Intech Racing’s Gene Hickerson takes TQ & 1st place in 13.5T 4wd Buggy with the ER-14 and in 2wd Masters Buggy with the ER-12 at the Roar Region 4 Championships! Also, Gene takes 3rd in 17.5T 2wd Stock Buggy with the ER-12. http://www.intechracing.com/gct_admi...6162161239.jpg Congrates! Gene " the Machine" Hickerson! |
Originally Posted by IRSR
(Post 14055574)
http://www.intechracing.com/gct_admi...6162162411.jpg
Intech Racing’s Gene Hickerson takes TQ & 1st place in 13.5T 4wd Buggy with the ER-14 and in 2wd Masters Buggy with the ER-12 at the Roar Region 4 Championships! Also, Gene takes 3rd in 17.5T 2wd Stock Buggy with the ER-12. http://www.intechracing.com/gct_admi...6162161239.jpg Congrates! Gene " the Machine" Hickerson! All 3 buggies were Dialed! :nod: |
|
Is that a narrow chassis ER-12 in the pic of all 3 buggies?
|
| All times are GMT -7. It is currently 01:28 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.