So I'm fairly new to Scte but not indoor clay. I recently acquired a Ten-Scte 4x4 w the TLR tuning kit and 2.0 upgrades. The problem I'm having is it seems to dive in corners and the inside rear tire lifts then it spins out. I'm running 30wt rear and 35wt front. Blue springs front red in rear. Black sway bars f/r. Shock position front is inside top inside bottom. Rear is mid top inside bottom.
It's seems to have too much body roll. Any suggestions are appreciated.

You might want to try looking (asking) here: http://www.rctech.net/forum/electric...it-thread.html

Is your front camber link in the lowest hole on the front tower? I think there's only upper and lower, no inner outer?

Stiffer rear sway bar bring rear shock bottoms out, and tops in

Your setup is way off I would start from scratch with Ryan's setup.

http://www.casper-rc.com/TLR_Ten-SCTE.htm

Excellent advice, and is recommended as it is part of the rules.