Pulse_

Please share the weight of your empty 1/8 e-buggy

= no electro, no tires, no body

Mugen MBX6 Eco US spec: 1900g
JQ THE Car Tekno V4: 1916g
Kyosho MP9E TKI: 1988g

...and your ready to race buggy (with everything included, please detail your electronics, body & tires)

Xray XB9E: 3535g

T8i motor, MMP esc + CC bec, 6S 3300mah zippy lipo, Hitec 7940TH servo, de racing mudguards & skidplates, M2C shock tower protection and chassis rubber protection, Jconcepts Finnisher body, Procircuit tires

I asked for both weights considering many don't want to empty their buggy just for this

wittyname

iTrader: (4)

808e with stock body , castle 2200 , mamba monster, 5000 mah turnigy 4s pack , aka premounts . 3628 g

Jpm1

iTrader: (8)

Kyosho mp9e - 3294 grams

Tekin pro4 hd 1850kv
Gen2 rx8
Kopropo bsx
Airtronics reciever
Smc 4600 shorty
FTW night fox body
Kyosho wing
Jconcepts rulux wheels
Aka Ibeams.

Justin

sapphire1

iTrader: (4)

Mugen mbx6 eco-3483 grams
Tekin 1900kv motor
Hobbywing 150a esc
G force 4000 Mah 5s lipo battery
Aka supersoft impacts with red foams
De racing Borrego wheels
J concepts wing
Spectrum s6020 servo
Futaba rf203 receiver

Pulse_

sweet setup, do you run the pro4 hd on outdoor tracks also?

is the night fox big enough for larger 4S lipos (5000mah for axample)?

here is my mbx6 eco us spec, 3537g

tekin t8 1400kv
mmp esc + cc bec
6S 3300mah zippy lipos (equivalent to 4S 5000mah)
savox 1258TG servo
airtronics receiver
Jconcepts body (with tape)
procircuit wheels & tires

note that it is fully protected with de racing skidplates and adhesive rubber bands on all the chassis so a standard eco would be a bit lighter

egobrkr

iTrader: (29)

Mugen MBX6 ECO
Proline bulldog body
Novak Activ8 esc
Novak 1950kv
Thunder power 4s 5300mah 65c
JR 9100s servo
Proline wheels
Proline Ion super soft
Proline High Downforce wing
Rear Aluminium hubs
Futaba rx
Mylaps 3 wire transponder

3631g

Voltron989

iTrader: (5)

Serpent 811be 2.0

Tekin 1700
Tekin RX8 Gen 2
Hitec 7945
Futaba 614-E RX
MyLaps RC4 Hybrid transponder
2 x Venom 7.4v 5600 50c lipos
Sweep micro contacts tires/wheels
Serpent Avenger Body

Race ready weight = 3660 grams(3050 grams no lipos)

Add on's that added weight from the stock kit
Front and rear aluminum shock towers instead of CF
Aluminum C-hubs and steering blocks
Aluminum rear uprights
Aluminum steering rack
Aluminum rear chassis brace
Aluminum servo horn
Aluminum wing post braces and wing washers

TY@TEAMTEKIN

TLR 8IGHT-E 3.0

Tekin RX8 GEN2
Tekin T8 GEN2 1900kV
ProTek 4S 4100 70C
Hitec HS-7940TH
Spektrum SR2000
MRT PTX
TLR Body
TLR 3.0 Wing w/wicker
Hot Bodies Megabytes
Hot Bodies CC foams
Hot Bodies Wheels

3532g

Derry

iTrader: (27)

TLR 8IGHT-E 2.0

HW SCT Pro
Tekin T8 Gen1 1900
Gensace 4s 5000 40c
Protek 130T
Spektrum 3100
MyLaps hybrid
TLR 2.0 Nitro body
Proline snipers
proline foams
TLR wheels

3538g

iamahuman

JQ THE eCar + savox 1258TG

1900gms.

hd

hello

Tekno rc EB-48y 3408 grams (french rules limit: 3400gr)

Neumotor 1515 1500KV
Mamba Max Monster v3
Align DS610 servo
Futaba reciever
Gen Ace 6s 3300mah hardcase
Stock body
Durango Dex408 wing
AKA wheels and inserts
AKA Ibeams
Titanium and alu screws
All TeknoRC lightweight options (except carbon shocks tower)

bye

Jpm1

iTrader: (8)

Yes I run it on large outdoor, 40 sec lap time, night fox body just touches roar brick packs but not enough to flex the body.

I also used all alloy screws for everywhere except the lower suspension points and motor mount, that saved 90 grams!!!

Justin

Pulse_

which is more than 3 tons, congratulations

interesting to hear you use it on large tracks too

I'm running a 1350kv T8i in 6S on my XB9E since the T8i is out and it's my favorite motor, suits my driving style perfectly

hd

hello pulse ! Did you use T8i on large tracks too or is it only for indoor ?

How about your motor's temp ?

Amitiés !

Pulse_

Hi hd nice to see you here!

for now I run it on small outdoor tracks, astro or clay

temps are 50°C at the end of a 15 minutes run, it's 5° more than with a T8 1400kv, so nothing major

but it's my favourite motor, no doubt about it (esc is a MMP) super smooth, perfect motor response in 6S