Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
#4007
Tech Adept
Lol!
#4008
Tech Adept
Start tearing up those chassis...wow!
#4012
Tech Adept
#4013
Couple things I learned running my first race with the B5
- Car is fast and really smooth coming of the jumps and landings are soft and forgiving
- Make sure to locktite your rear hub ball stud...almost blew one off
- The front axle inserts could be an issue down the road. I noticed the only slop in the steering is caused by the inserts wiggling slightly in the front hub assembly, one side more than another. I foresee aluminum or carbon inserts in the future as it could be a wear item. Nothing to worry about yet as its minimal play.
- Front end pushes on the stock setup, seems everyone is going to the 3mm front axle setup, shorty battery forward seemed the best.
- Best car I've ever driven and put together
- Car is fast and really smooth coming of the jumps and landings are soft and forgiving
- Make sure to locktite your rear hub ball stud...almost blew one off
- The front axle inserts could be an issue down the road. I noticed the only slop in the steering is caused by the inserts wiggling slightly in the front hub assembly, one side more than another. I foresee aluminum or carbon inserts in the future as it could be a wear item. Nothing to worry about yet as its minimal play.
- Front end pushes on the stock setup, seems everyone is going to the 3mm front axle setup, shorty battery forward seemed the best.
- Best car I've ever driven and put together
#4014
Tech Adept
Nice post...Will be trying the 3mm front tomorrow.
#4015
#4016
Tech Adept
Would the gullwing arms and tower not be an option for reducing the push?? I know it helped a ton on my sc10, I read somewhere that it was an option for more steering.?.?
#4017
Tech Adept
Just a thought that i haven't heard brought up yet... Hey, here's an idea, get the gullwing and test...lol
#4019