RavensNightFury

iTrader: (7)

sweet thanks pete did you take you truggy for a other run yet I get mine Monday I hope then order the parts

BigRon

iTrader: (22)

For you guys running the 2000kv Tekin motor, are you using the kit 18t pinion?

RavensNightFury

iTrader: (7)

I still waiting to get my kit got the truggy just waiting on the kit

RKK_J

I'm running the same motor on 4S with 15T pinion and 48T spur. The 18T kit pinion is too big for me for medium sized outdoor tracks.

RavensNightFury

iTrader: (7)

so guys who runs tekin and who run a different 1/8 esc in there truggy show pics

RavensNightFury

iTrader: (7)

so I was looking at the XERUN-150A-SD and the tekin RX8 Gen2 esc and they look oh most the same size and I thought with modding the radio tray I think this could fit inwhat you guys think here are the size and all for both tell me what you think
XERUN-150A-SD
Size: 58mm(L) * 46.5mm(W) * 35mm(H).
Tekin RX8 Gen2
Dimensions: 38 x 55.8 x 35.5mm
so could I fit it to the buggy and truggy with buying a new radio tray

tkge

iTrader: (123)

I have ran the stock 18t pinion on the last two tracks and it works well for me.

RavensNightFury

iTrader: (7)

What with a 2000 dam hey what was your temps

RKK_J

18T and a 2000kV is overgeared for me. Watch out for the temperatures!

RavensNightFury

iTrader: (7)

I was thinking of 15 for me on a 2100kv motor with the pounch lvl down to 30 percent

taztal3

iTrader: (29)

anyone got the cobra e-truggy kit yet ?

Stealth_RT

iTrader: (5)

Full electric kit isn't out yet. It's still 'expected' if you look on Serpent's site under the Cars. Soon, I hope. I keep pestering Chicky about it. They have all the parts already, 'just' need to package it all and make the manual.

TensaZangetsu

hi guys
I just brought a serpent truggy and got the conversion kit for it as well
I had a new hobbywing 150amp blue esc as well
I thought I give it a try and see it fits the radio tray off the truggy radio tray
good new it does fit with any mods to make it fit

TensaZangetsu

This my new serpent E-Truggy
My Setup
Serpent 811T-E
HobbyWing 150 amp
Expert 5110 Servo
TrackStar 1900KV
Smc lipos

its matchs my buggy too
My Setup
Serpent 811BE 2.0
HobbyWing 120 sct pro
TrackStar 1268 Servo
TrackStar 1900KV
Smc lipos

tkge

iTrader: (123)

Looks good!