Anything on the Duratrax DXR8-e?

Think the ftw bodies for the tekno conversion will fit it.

Anyone know of any bodies that will fit the hyper 9e??

Thanx, i will look into it.

Anyone know what bodies will fit the Eco?

Tekno eb48 chassis and body 4.8" wide.

Been looking for a body for the 835b .

Mugen MBX6E is about 7.25" from front to back. The side pods are about 2" tall. Maximum battery height is about 50mm and that leaves no room for wires on the top. Unless you don't mind that your body doesn't fit straight.

I need a body for my D8 with an RC Monster Conversion. Will the bodies that fit a Tekno conversion work?

Bodies that will fit an HHH or Tekno Ve8, using Tekno steering brace.

Losi Stock 8ight-e
Pro-Line Slipstream 8ight-e
HB Stock Ve8 body
FTW Exabyte
JConcepts Illuzion 8ight-e
JConcepts Illuzion Ve8
HB Trick Body (a little wide, but okay)

Nope the tekno chassis is narrower.

You can use
HPI103420 - Vorza Body
KYOIFB002 - Kyosho MP-9 Body
JJCI0077 - Concepts - Illuzion Kyosho MP9 Hi-Flow
PRO3295-40 - Pro-Line - Shift Kyosho MP9
HBS67444 - Hot Bodies - D8 Body
JCO0075 - JConcepts - Illuzion Hot Bodies D8 Hi Flow
3370-00 - Pro-Line - 2012 BullDog Hot Bodies D8
3327-00 Pro-Line Bulldog Hot Bodies D8
FTW night fox body http://www.liverc.com/news/special_f...s_D8_with_FTW/

for a d8 stock chassis conversion use the associated rc8b, or kyosho mp9 or hpi vorza bodies. I have a stock rc8be body the fits perfectly using only Velcro to hold it on.

Sorry for changing the subject here...
Do you know if any one has done this similar body fit guide for the 1/8 Truggys??
As i am trying to find a narrower shell to run on the RC8-T Tekno converted??

Thanks!

Anyone tried these on an rc8.2e?

http://www.ftwrc.com/Exabyte-MBX6-w-...sion_p_31.html

http://www.ftwrc.com/Exabyte-D8-w-Te...sion_p_30.html