Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#9316
Tech Adept
Yup np I'll post pics too.. I'm in the process of taking out my avid slipper on my 22 and putting it on my RB6 so this the perfect time to do it lol..might as well right? Haha.
#9319
Tech Adept
#9321
Tech Regular
Going to switch to a low pro servo (-15g).
I've added 40grams on the rear bulk head where the sway bar mounts, and 50gram plate under the battery to get it legal.
#9322
Yes. I got my mid motor down to 1420g. (light weight body + light weight chassis + carbon arms/knuckles/towers + mip puck system + avid slipper + titanium screws + AKA EVO wheels + reedy 4100 shorty lipo + HW3.1 esc + ko receiver + some other clever mods)
Going to switch to a low pro servo (-15g).
I've added 40grams on the rear bulk head where the sway bar mounts, and 50gram plate under the battery to get it legal.
Going to switch to a low pro servo (-15g).
I've added 40grams on the rear bulk head where the sway bar mounts, and 50gram plate under the battery to get it legal.
#9323
Hey guys does the Tammy 201X XR/XM body 84368 fit the rb6? Thx
#9324
Tech Adept
Does anyone know if Tebo was running the full carbon options bits in the Worlds?
I am receiving the new parts on Monday for testing but only opted for the carbon arms for carpet racing...
I am receiving the new parts on Monday for testing but only opted for the carbon arms for carpet racing...
#9326
Tech Champion
iTrader: (73)
Has anyone used rtv or similar to make a gasket for their gear diff? I took mine out which I had filled with a mix of some oil and some black grease, and it had completely emptied. I had gotten the TSR kit, it didn't seem to leak for the first 2-3 weeks, but I noticed it coming out of the case last week.
#9327
I used the black gasket sealer in my losi and it worked great