Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#5717
#5719
Tech Elite
iTrader: (68)
I have to say this was my first full build of any car? I am about 75 % done. The only things left are the shocks and couple of misc stuff. Will say very easy build just took some time but thats bc I wanted to be carefull and double check I did not miss anything. When building the ball diff I did destroy the plastic nut while trying to remove it bc I could not get it catch the screw. I have the exotek one coming in a couple of days. any tips on the ball diff install?
#5722
When you run tripple A mains, if you take the win in 1 and 2, you are done with 200 points... as your points only count from your "best two of three". So, Tebo takes podium spot #1 after A2. Running in A3 just gets in the way of the other racers competing for spots 2 and 3 on the podium.
#5723
Good to see the rb6 is more than capable, in the right hands, in MM. And the class was not won by an on-roader! Though arguably the best rear-wheel on-roader right now.
#5726
Who makes a good chassis protector for the RB6?
#5728
Re tebo's mm setup
Yeah me too. There's a body off photo on live rc and you can see he ran saddle packs. At least it's something till the sheet comes out.
Yeah me too. There's a body off photo on live rc and you can see he ran saddle packs. At least it's something till the sheet comes out.
#5729
On the weekend we had a big meet in sydney australia, 150 entries over 6 class, 2/4wd mod/stock and stadium/short bus 10.5. 33 entries in 2wd mod with about 15 of those top ranking in australia. We had 4 RB6, 3 22's, 2 D210, and a yokomo in the a final, with rb6 taking the win (black/yellow/white) and 3rd (white with pink wheels). I finished 9th and 1st in stadium(RT5).
The track was high grip with bar code style tires working well, but lots of bumps/ruts from 2 months of poor weather in the lead up to the event made it very easy to make mistakes (hence the club would have liked a few more jumps but ran out of time). The big drop at the top of the hill is called the cork screw
Video of 2wd Modified A final leg 1:
https://www.youtube.com/watch?v=tUsVG_QVdKM
Video of 2wd Modified A final leg 2:
http://www.youtube.com/watch?v=uymarjz36Ls
Video of 4wd Modified A final leg 1:
http://www.youtube.com/watch?v=JJ6is_9cRV0
The track was high grip with bar code style tires working well, but lots of bumps/ruts from 2 months of poor weather in the lead up to the event made it very easy to make mistakes (hence the club would have liked a few more jumps but ran out of time). The big drop at the top of the hill is called the cork screw
Video of 2wd Modified A final leg 1:
https://www.youtube.com/watch?v=tUsVG_QVdKM
Video of 2wd Modified A final leg 2:
http://www.youtube.com/watch?v=uymarjz36Ls
Video of 4wd Modified A final leg 1:
http://www.youtube.com/watch?v=JJ6is_9cRV0