ravage

iTrader: (15)

Last night I went to the a track and they had blitzs sc10s and other short course trucks. The only thing I really did was change the pinion gears and I was running a lipo I was actually surprised how much the slash kept up with those trucks. I noticed when I was going down the straight and when I would turn my tires would turn left and spin out why do you think this is?

M03Racer

iTrader: (33)

You mean you where spinning out in the turns. If so check that your slipper clutch is not too tight. Also make sure you are using the right tire set up for the right track, like for instance stock slash tires suck so get the pin type for better grip.

ravage

iTrader: (15)

Also I just noticed when I would turn left my tires would jerk left then right then back to left real quick

M03Racer

iTrader: (33)

Are you using 27 crystal based AM receiver/transmitter or are using 2.4G radio system.

Icantdrive55

iTrader: (1)

That is probably the stock servo saver and servo itself, replace with any good servo and proline makes an improved servo saver/bell crank to fix that problem. I have also read that the slash 4x4 bell crank fits on the slash. I can't say that for 100% but if it does the strc bell crank works well.

For future reference the slash has a thread already in the off road forum and your questions should be posted there. Starting new threads about vehicles is against the rules just FYI.

ravage

iTrader: (15)

Ooo ok