Tacticalmonk

Have just installed an lcg kit. Was wondering where you guys are locating your esc power switch. Pics or description would be great thanks.

Scott

Adonis_mp

iTrader: (9)

Which LCG kit? If you have the STRC, them you can mount it on either side of the battery area or you could get the mounting plate that can be placed on the top near the rear shock tower

goreyboggs

iTrader: (10)

Hey guys is this proline upgrades any good? I got the shocks, and suspension set up. Also what are the good chassis for an upgrade?

Jeff

godofcable

iTrader: (37)

regarding chassis, have a look at this.

RCovalracer77

Just a question, why not start with the electric Rustler, update the Camber rods?

Mount readily available Slash Wheels and tires, as well as an aftermarke Slash body

It would seem to be a cost effective solution to a LCG Chassis for the Slash?

What are we missing?

Thanks

slimthelineman

Rustler wheelbase is much shorter than the slash. That's why the strc lcg kit uses the extension plates to bring the wheelbase out to about the stock slash length. There are a few lcg kits out there now but I've been running the strc kit and am very pleased with the results.

godofcable

iTrader: (37)

also the STRC kit uses the front and rear suspension from the Slash, so the width is right.

carguybri

Hey just wanted to share my slash setup with you guys
Rpm front and rear a arms
Rpm front and rear bumper
Mud guards
Red aluminum steering
Hitec hi toque steering servo
Vxl motor and esc
J concepts raptor body
Proline shocks
Barcodes in front
Holeshot 2.0 in back
90% of it is not stock

turners dad

iTrader: (43)

ordered my WMD lcg chassis Friday, can't wait till it gets here.
toddwfo

godofcable

iTrader: (37)

good deal.

skipnay

iTrader: (6)

Guys my buddy just got one of these 2x4 Traxxas Slash new from the LHS. He paid right around $250.00 brand new. It came with the 7 cell Nimh 3000mah battery. I have 2s batteries that we use in my wife's cousin's Losi xxx-sct. He was wondering if he used one of my Lipo's it will hurt it? He thought about upgrading to a brushless system.... My Lipo's are Venom 2s 1p 5000 mah, 20c

TIZAO

iTrader: (11)

Should be fine just make sure the Speedo has a low voltage cutoff or make sure to get one you don't want to overdischarge one of those!

kcooper273

iTrader: (62)

Hey guys I'm planning on running some of the MSCS races in Mod 2wd w/my Slash and I was wondering if I should run a 13.5 or 17.5 turn motor. I know 17.5 motors are used in Stock and run pretty well....Can a Slash handle a 13.5?

Thanks

TIZAO

iTrader: (11)

On a good bash day I run through 15000 mah with my 13.5 and have no issues

skipnay

iTrader: (6)

How can I tell this?