Originally Posted by rcjunky10 (Post 10152736)

For those of you that have them I just want to make sure I am understanding your meaning correctly. At present Serpent only offers Conical pistons as an option, at least on the Amain website. I have not seen a tapered piston option. For those that are unclear in the difference here you go:

- Conical cut refers to a radiused surface on one side of the piston, usually the compression side.
- Tapered cut refers to the holes and their orientation to the horizontal surface of the piston face. Stock are straight cut, holes are drilled at 90 degrees to the horizontal plane. Wereas tapered pistons are cut at an angle as they pass through the piston body. As for the fluid dynamics bit, well that's outside my pay grade!

Does Serpent offer a tapered piston? If so, where do you find it?

Originally Posted by bigjayjay1 (Post 10153012)

The holes are the same as the stock the serpent conical piston is convex the holes are not tapered

Originally Posted by rcfiend (Post 10151926)

Let's us know how the IX8 works for you. I'm considering that Esc as well. Has anyone tried the IX8? If so I would love to hear how it performs and if it is as smooth as the TC

Originally Posted by rcjunky10 (Post 10153237)

That's what I thought Bigjay. It seemed as if folks were eluding to another option set of pistons. Just wanted to make sure we were all on the same page.

Originally Posted by bigjayjay1 (Post 10155404)

Checkout the CSI thread

Originally Posted by atl darrick (Post 10155954)

got everything done besides for setting the car up. still got to install my webbed shock bladders and 8 hole conical pistons. anways here she is....
http://i297.photobucket.com/albums/m...1-11130524.jpg
http://i297.photobucket.com/albums/m...1-11130557.jpg
http://i297.photobucket.com/albums/m...1-11131253.jpg

Originally Posted by rcjunky10 (Post 10155646)

What is the CSI thread?

Originally Posted by bigjayjay1 (Post 10156927)

http://www.rctech.net/forum/nitro-of...nsion-inc.html

Absolute has in stock just ordered some

Originally Posted by Krafcik (Post 10158625)

Can these be converted to a truggy?

Originally Posted by ketwol (Post 10163212)

Would the nitro 811, punisher or bitty design bodies fit this car?