![]() |
So I finally got my exotek chassis,garodisc all 3 on with clutch basket and saddle. I also added 3.5oz on the front and it runs AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!! The handling is 100 times better. Still need the stage two but man it's like a new truck. I wanna give a special thanks to coyote,craigmba, and the other top helpers herrr. I have learned a lot from this site and I hope many others will soon. :nod::tire::lol::nod::tire::lol: my truck is on :flaming:
|
clutch basket <-----what is this post a pic or a part number to it>?
|
Originally Posted by Graphite07
(Post 10085375)
clutch basket <-----what is this post a pic or a part number to it>?
|
Easy thing to do ...
Originally Posted by Graphite07
(Post 10084115)
Thanks that worked. now another issuse. should the 4x4 roll freely when pushed by hand? my sc4x4 is hard to push by hand like something is to tight.
U may have mixed up and use too long of a screw on one the transmissions... |
I cant wait to get my ball diff from marcus, i think thats gonna be the final piece needed
|
I can now confirm the following:
1. RTR shock screws have been thread locked. 2. RTR diffs have just enough oil to coat the gears. Drained them as best I could to replace with my oil and hardly any came out. 3. Getting the diffs out of this thing is a pain in the a$$! :flaming: 4. RTR motor with 25c 2s Lipo provides better than expected performance. Comparable to Castle Sidewinder SCT system. Soft launch control is default setting. Gearing is just right for top speed on most medium sized tracks. May want to go up a couple teeth for a larger 1/8 track. 5. RTR steering servo is plenty fast enough. Turn the dual rate all the way down. 6. Check all fasteners on RTR. Found several that were not tightened all the way, including wheel nuts. |
Originally Posted by IRM616
(Post 10085371)
So I finally got my exotek chassis,garodisc all 3 on with clutch basket and saddle. I also added 3.5oz on the front and it runs AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!! The handling is 100 times better. Still need the stage two but man it's like a new truck. I wanna give a special thanks to coyote,craigmba, and the other top helpers herrr. I have learned a lot from this site and I hope many others will soon. :nod::tire::lol::nod::tire::lol: my truck is on :flaming:
PEOPLE WHO ASK A QUESTION I ANSWERED SEVEN POSTS AGO IN BOLD TEXT WITH LINKS. YOU FREAKING %$^&*$##!@. :deathstar :blush: |
Originally Posted by Graphite07
(Post 10085375)
clutch basket <-----what is this post a pic or a part number to it>?
It adds another slipper pad to help with the poor stock slipper setup. So that you can actually adjust your slipper without having to have it "locked down" |
Originally Posted by CoyoteSlash
(Post 10085407)
Thanks, IRM. Makes it worth dealing with:
PEOPLE WHO ASK A QUESTION I ANSWERED SEVEN POSTS AGO IN BOLD TEXT WITH LINKS. YOU FREAKING %$^&*$##!@. :deathstar :blush: |
Originally Posted by Graphite07
(Post 10085375)
clutch basket <-----what is this post a pic or a part number to it>?
|
Originally Posted by rickybobbyxxx
(Post 10085370)
As per viper, there being sent out first week in january, def worth the wait, i was able to get ahold of a preproduction combo and its badass!!!
|
Marcus!
Where the $^#@& Are my Dual stage pistons! I'm sitting here bored! :lol: |
i am going to order the clutch basket today.
|
Highly recommend.
|
Originally Posted by Graphite07
(Post 10086469)
i am going to order the clutch basket today.
|
| All times are GMT -7. It is currently 10:35 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.