|
What are y'all gearing the ballistic 5.5 550. I geared it the same as my friends 1410 and it is not near as fast. It's not slow but wanting more speed.
|
Originally Posted by Super Coupe
(Post 9190122)
What are y'all gearing the ballistic 5.5 550. I geared it the same as my friends 1410 and it is not near as fast. It's not slow but wanting more speed.
|
Originally Posted by FRONTI3R
(Post 9190254)
I don't have a ballistic 5.5T 550 but I have the Tekin 5.5T 550 motor and I'm using the 62T spur with a 15T pinion. You would be good with 13T to a 15T pinion!
|
lrp 550 4.5
well second weekend out with the new lrp 550 4.5 it seemed like my truck was losing power on the second pack out. i brought it in grabbed both rear wheels and gave it a little throttle sounded like when you have a loose ball diff or loose slipper motor was turning but the wheels were not turning very strong. i pulled the whole rear tranny off thinking maybe the diff gears. no way after further investigating. i pulled the motor and said let me try something grabbed the pinion hit the throttle lightly. well the motor spins but the pinion shaft does not something broke loose inside. well i boxed it up today going back this afternoon to associated. ive never had trouble with warranty before so shouldnt be a problem. i ordered a tekin 4.5 to get by until then. i noticed the tekin has a different kv rating than the novak 4.5 and the lrp 4.5 anyone know why? i ran my spare ballistic 550 5.5 on 2s the rest of the day and with the 13 tooth pinion it was way underpowered and slow as dirt lol.
any one have any trouble with the new lrps yet. im thinking the new one when it comes back will be saved for a spare. really sucks its a fast smooth motor. i miss my old novak hv 4.5 it was by far the strongest ive tried yet but the damn thing would stutter in the middle of a race from brake to forward. |
Anybody have problems with warped wheels? One of mine is way off. Thought I had a bent axle but it's definelty the wheel. Other than that it's perfect.
|
Anyone have some ideas on gearing for this?
AE sc10 4x4 Viper vtx10r Viper 6.5 540 |
Originally Posted by CraigV
(Post 9189474)
I am currently running the Castle Sidewinder SCT combo (ESC and 1410 motor).
I have a Viper VXT10R Lite (without ProGauge since I already have one) and Viper VST 8.5 540 motor on order (order is on hold) and have already paid for it 100%. I got a super deal on it too. I run on a tight indoor carpet track. So, Option 1: Take the above order as is. Run the Viper ESC and 8.5 540 motor. Pro: I can get it as soon as possible. (2 weeks) Pro: I get a really nice ESC Pro: I can use the Castle ESC/Motor in another vehicle (maybe a 2wd SC to bash with) Con: 8.5 motor may cook in the SC10 Con: the Viper ESCs do no work at all with sensorless motors, so I can not use the Castle motor with it. Option 2: Modify the order to: Viper VXT10R ESC and Viper 550 5.5 motor, wait a few weeks. This motor is big like the Novaks and may require chassis modification for it to fit and mesh up properly. Pro: This should be a really nice setup. Pro: I get a really nice ESC Pro: I can use the Castle ESC/Motor in another vehicle (maybe a 2wd SC to bash with) Con: It will probably take a 4-6 weeks for me to get it. (shipped to Canada) Con: may require chassis modification for it to fit and mesh up properly. Option 3: Get a refund on the Viper stuff, buy a Tekin RX8 to run with the Castle 1410. The RX8 will cost me the same as the Viper VTX10R and 8.5 combo. Pro: Very nice esc, pretty good motor Pro: Can get it as soon as possible (2 weeks) Con: Not really the ESC/Motor I wanted Con: Turning down a super deal on the Viper stuff Con: I won't have a ESC/Motor combo to put in a basher What do you guys think I should do? And if you can wait a few months longer Viper is releasing the 1/8th scale ESC which will run sensorless, so the 4 poles will be able to run on the Viper gear. |
Originally Posted by shawn00sa
(Post 9190433)
Anyone have some ideas on gearing for this?
AE sc10 4x4 Viper vtx10r Viper 6.5 540 Hope that gives you a starting point. |
My current set up can be found here on the front page of Track Star RC's website.
|
Originally Posted by 250r
(Post 9190350)
well the motor spins but the pinion shaft does not something broke loose inside.
Originally Posted by 250r
(Post 9190350)
i noticed the tekin has a different kv rating than the novak 4.5 and the lrp 4.5 anyone know why? i ran my spare ballistic 550 5.5 on 2s the rest of the day and with the 13 tooth pinion it was way underpowered and slow as dirt lol.
LRP is a 13mm. Less torque, more RPM. Tekin is 12.5mm. Even less torque, even more RPMs. I think the Novak will be the most forgiving, and let you gear it higher for more speed, but the LRP and the Tekin will be smoother. Depends on your driving style and how much you like swapping out pinions. |
Losi 8 2.0 shocks $99
Assoc Factory Team Shocks $130 and not out yet ? Wait or go for losi now? I need two sets for sure: one for off-road and one for on-road with lots of limiting |
Originally Posted by 250r
(Post 9190350)
well second weekend out with the new lrp 550 4.5 it seemed like my truck was losing power on the second pack out. i brought it in grabbed both rear wheels and gave it a little throttle sounded like when you have a loose ball diff or loose slipper motor was turning but the wheels were not turning very strong. i pulled the whole rear tranny off thinking maybe the diff gears. no way after further investigating. i pulled the motor and said let me try something grabbed the pinion hit the throttle lightly. well the motor spins but the pinion shaft does not something broke loose inside. well i boxed it up today going back this afternoon to associated. ive never had trouble with warranty before so shouldnt be a problem. i ordered a tekin 4.5 to get by until then. i noticed the tekin has a different kv rating than the novak 4.5 and the lrp 4.5 anyone know why? i ran my spare ballistic 550 5.5 on 2s the rest of the day and with the 13 tooth pinion it was way underpowered and slow as dirt lol.
any one have any trouble with the new lrps yet. im thinking the new one when it comes back will be saved for a spare. really sucks its a fast smooth motor. i miss my old novak hv 4.5 it was by far the strongest ive tried yet but the damn thing would stutter in the middle of a race from brake to forward. I've had the same problem with (3) Novak rotors. I've got more miles on my Tekin 4.5 and it has never failed. The Tekin is smoother then the Novak 4.5 so you'll probably love the Tekin. Heres the fix for the rotor problem. I went to Advance Auto and got some Permatex high temperature sleeve retainer, it cost about $9.00 Loctite also makes the same thing. The I pulled the rotor magnet off the pinion shaft cleaned them both with brake cleaner. Then I followed the instructions for the Permatex and I never had the problem again. Everyone I talked to at the track that sent motors back for repair has the problem over & over again. My fix is permenent, so give it a try, nothing to loose but $9.00 & a little time. Hope this helps... |
The Novak motor is a 13mm rotor..14mm optional
|
Originally Posted by Chuck 21
(Post 9190998)
I've had the same problem with (3) Novak rotors. I've got more miles
on my Tekin 4.5 and it has never failed. The Tekin is smoother then the Novak 4.5 so you'll probably love the Tekin. Heres the fix for the rotor problem. I went to Advance Auto and got some Permatex high temperature sleeve retainer, it cost about $9.00 Loctite also makes the same thing. The I pulled the rotor magnet off the pinion shaft cleaned them both with brake cleaner. Then I followed the instructions for the Permatex and I never had the problem again. Everyone I talked to at the track that sent motors back for repair has the problem over & over again. My fix is permenent, so give it a try, nothing to loose but $9.00 & a little time. Hope this helps... the motor gets hot and unglues the magnet rom the shaft. I had 2 hv's go out and seen a guy with 3 tekin's 1/8th scale motors do the same. got some glue and I finished the season on 1 motor. another ? I just noticed 1 of my front diff outdrives is wobbling. anybody else have this? I plan on calling ae today and see if it's under warenty. we'll see what happends |
is there alot of people glazing there slipper pads
trouble with slipper |
| All times are GMT -7. It is currently 09:55 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.