Hyper 7 Project
I have a old hyper 7 sitting in the garage that I want to revive as a basher. Just some thing for camping trips to the sand dunes. I put way to much abuse on my track hyper 9e last trip.
What does it need to update it? What hop ups does it need to make it stonger? What parts break? Does anyone make a electric conversion for it? Can I swap out the shocks for the big bore 17mm style that are on my hyper 9e? Is there a cheaper big bore solution? Or any other thoughts would be appreciated Matt |
super 7
Buddy Ill tell you first hand, the hyper 7 in still the strongest buggy Ive had to date. I ran it every single day for 2 years strait ( weather pending of course) never broke a single thing..NOTHING! I burned down 3 nitro motors and endless amount of nirto through it.. thing is BOMB PROOF! After I burned up my last motor this is what I did..http://www.youtube.com/watch?v=72F2T...&tracker=False
still running to this day |
Good to hear. I think I am going to put a MMM with a 2200kv on 4S.
|
I will agree. I have a hyper 7, i dont use it any more, but the buggy is like a rock. I think the only things i ever broke on it were the wing, some piece that goes infront of the front differential and kinda holds the two a arms together...and i think really that was it! I only broke that one part because it was a run away at full speed into a steel pole. $5 part. The car was doing top speed at wide open throttle. seriously the thing is a freaking tank.
|
I too have been sitting on a Hyper 7 for a few years and finally decided to go BL. Thinking about the RCProductDesigns conversion for it.
I've been very happy with the performance in the past and my interest in nitro has subsided so I wanted to make the most of a great car and build a durable basher. MOmo |
Originally Posted by MOmo
(Post 8788412)
I too have been sitting on a Hyper 7 for a few years and finally decided to go BL. Thinking about the RCProductDesigns conversion for it.
I've been very happy with the performance in the past and my interest in nitro has subsided so I wanted to make the most of a great car and build a durable basher. MOmo |
Originally Posted by mad_about_losi
(Post 8788443)
Go with the rcmonster setup. Rcproductdesign does the batteries on both sides and sits to far out. It doesn't give enough center gravity.
|
Do you guys have a link for the rcmonster conversion kit? I looked and couldn't find it.
Matt |
|
So MMM and 2200, Rcmonster motor mount and battery box, hyper 9 17mm big bores, jconcepts ilusion body, and rear paddles on the way.
|
Originally Posted by LBLife
(Post 8813325)
So MMM and 2200, Rcmonster motor mount and battery box, hyper 9 17mm big bores, jconcepts ilusion body, and rear paddles on the way.
|
Originally Posted by LBLife
(Post 8813325)
So MMM and 2200, Rcmonster motor mount and battery box, hyper 9 17mm big bores, jconcepts ilusion body, and rear paddles on the way.
|
All times are GMT -7. It is currently 01:45 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.