RCaddict0

iTrader: (85)

I highly suggest the XeRun 80A combo. There adjustable in everyway, very smooth (almost comparable to sensored), run cool and are reliable. Ive owned countless Hobbywing products and there great. Ive had more issues with better known namebrands than any of my Hobbywing stuff. I have the XeRun 80A and a cheap Kershaw Designs 3674 2370kv (cheap 2 pole chinese motor) and its awsome. It has many runs now and never a problem.

maxxnslash

iTrader: (46)

you should send me a video of it running and all the specs you are running with it. Thanks!

RCaddict0

iTrader: (85)

I don't have camera, but Im running 2 x 2s with 17/68 gearing and its running cool({motor 130, esc 90}with the use of a hs and fan on the motor, it runs at safe temps without), the truck is all rpm and I havent had any issues with durablity. I went with two trx 2075 servos over the 2056 stocks and this provides much stronger steering. But it has alot of torque! So much that I had to dial down the punch on the esc. I can do a complete back flip back onto its wheels running 4s and it reaches 40 mph easily. I have no complaints with the motor, but I would suggest the Xe motor. But Kershaw Designs has the same combo that Im running.
http://www.nitrorcx.com/07e-c-combo-m1.html
http://204.186.93.64/index.htm Kershaw Designs also has there own 1/8 combo for $135 that was reviewed by Big Squid RC and it passed with flying colors

maxxnslash

iTrader: (46)

Ok I will definately check into that alot more. I would love to get a new system but with christmas comin up I won't have the cash to maybe get any system sadly

maxxnslash

iTrader: (46)

anymore ideas guys??

maxxnslash

iTrader: (46)

still looking for more ideas...

maxxnslash

iTrader: (46)

Well, the guy I had a deal with isn't answering any of my calls or texts. So, apparently that's a rude way of saying I don't want to sell it anymore. If anyone has a bl system for an emaxx let me know. I have a Wanted To Buy thread for it. Let me know. Thanks.