|
Originally Posted by toronto_rc
(Post 11236585)
I thought the B44 used proprietary 9.5mm front hexes...
|
Originally Posted by UN4RACING
(Post 11236338)
One of the best things about the 44 is it is a steering bandit. Plenty of steering...:nod:
The front already has 12mm on front box stock, you will have to invest in 12mm hexes for the rear if you choose. 10.5 thru 6.5 is all good the more you dial it in and the faster you get will best confirm the motor you want. I have even ran a 5.5 on mine. Some will argue the front end is weak but honestly its not the kit. I have raced the 44 platform for years. Its all driver error on the front end. Stock up on front shock shafts, caps, eyelets, and a-arms. A couple of sets of gear assemblies and you should be good. Clean driving and you wont need even worry about the front end at all. It takes a pretty serious hit to break it or a just right hit. |
Originally Posted by 79kmc
(Post 11236619)
Im pretty sure they are 9.5mm or 10mm hexes on the front, they are definitely not 12mm
|
I bought some B44.1 front JC 12mm hex wheels for the my new kit. But I couldn't find any hexes for the front of the kit so I assumed they were already 12mm. So I checked the JC package it states 12mm but they of not. Weird?
|
Guys... I'm pretty certain It's 12mm hexes front and back on the 44.1 kit. I'll check once home.
|
Originally Posted by TJMac
(Post 10731234)
No. B44.1 front hex is 9mm (or maybe 9.5mm). Even if you were able to switch hexes, the B4.1 front hex wheels have a much different offset.
Originally Posted by rigor
(Post 11237911)
Guys... I'm pretty certain It's 12mm hexes front and back on the 44.1 kit. I'll check once home.
|
The front hex is 100% not 12mm. It's the same smaller hex like losi had forever.
|
I checked and its 9.5mm....
|
Originally Posted by Asharus
(Post 11237954)
This sparked my interest. I hate the front hex design on the b44.1. I'd rather have a clamping hex.
The roll pin is captured by the wheel though. |
My baby is rebuilt and ready! I go a month or two without 4 wheel buggy and when she gets rebuilt its like the day before Christmas I get so excited! I love how you can have 200 batteries in a car and a few bucks later and a couple hours of work it's like she's new again!! Love it love it love it!!! Best 4 wheel EVER!!
http://i258.photobucket.com/albums/h...R/0a8bda4d.jpg http://i258.photobucket.com/albums/h...R/48e02159.jpg |
I'm a bit confused, after watching the hex adapters and hex wheels of different brands. Maybe there are some mistakes in the part lists...
Can somebody give me please the part numbers of the white associated hex wheels, with the hex adapters for the B44.1 and the B4.1, including the additional parts which I need to convert the B4.1 to hex? thanks! ;) |
Originally Posted by Fatal1ty
(Post 11242947)
I'm a bit confused, after watching the hex adapters and hex wheels of different brands. Maybe there are some mistakes in the part lists...
Can somebody give me please the part numbers of the white associated hex wheels, with the hex adapters for the B44.1 and the B4.1, including the additional parts which I need to convert the B4.1 to hex? thanks! ;) Im in the middle of rebuilding my 44.1 Do i flip the steering rack or leave it alone? |
Originally Posted by vicdamone11
(Post 11243804)
http://www.teamassociated.com/news/l...12mm_Hex_Drive
Im in the middle of rebuilding my 44.1 Do i flip the steering rack or leave it alone? These ones instead: http://www.teamassociated.com/news/l..._Wheel_Hexes_/ |
|
Originally Posted by Grouchman
(Post 11250274)
|
| All times are GMT -7. It is currently 07:15 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.