Durango DEX210 Thread
#2611
Tech Elite
iTrader: (153)
I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.
Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
#2612
lol.. the first thing I read in the review.
The instruction manual is clear and concise as any of the best I’ve ever seen. Super easy to follow and 100% small parts blow up so you can hold the screw/washer up to the manual to make sure it’s the right one.
guess that at rccaraction the overlooked the wrong partnumbers etc. etc. in the manual.
the manual that came with the kit is one of the worst Ive seen
for a proper build use the online version
The instruction manual is clear and concise as any of the best I’ve ever seen. Super easy to follow and 100% small parts blow up so you can hold the screw/washer up to the manual to make sure it’s the right one.
guess that at rccaraction the overlooked the wrong partnumbers etc. etc. in the manual.
the manual that came with the kit is one of the worst Ive seen
for a proper build use the online version
That was the worst build review I have read. Sorry RC Car Action, but I would have elaborated on quite a few steps. Especially the ones that separate this kit from the rest.
On those toe blocks, I am in as well.
#2613
my durango.
when I turn of the lights at night, I can still see it standing in the corner
when I turn of the lights at night, I can still see it standing in the corner
#2614
My NEW toy
Gotta head to my shop and swap the Mamba Max out for a Tekin RS... mamba TOOOOOO big
Should be all dialed by Noon or so
Gotta head to my shop and swap the Mamba Max out for a Tekin RS... mamba TOOOOOO big
Should be all dialed by Noon or so
#2615
Tech Elite
iTrader: (37)
What's up guys? I'm in dire need for some a-arm pivot balls. If you have any you can spare I'd be glad to pay you a couple bucks a piece to mail them to me. Can't seem to find any in stock anywhere and would like to race next weekend. Please help!
Here's the part I'm in need of.......
http://www.amainhobbies.com/product_...vot-Ball-Set-8
Here's the part I'm in need of.......
http://www.amainhobbies.com/product_...vot-Ball-Set-8
#2616
Tech Master
iTrader: (13)
That being said, he did mention (and gave the link) to use the Team Durango online diff guide to build the trans as well as the turnbuckles.
I actually told him what to look for while building the car and I gave him a little more detailed info than what he posted.
#2617
I dont think these blogs are meant to be a complete reveiw/buildup...it's just meant to give you a basic idea of what went into it.
That being said, he did mention (and gave the link) to use the Team Durango online diff guide to build the trans as well as the turnbuckles.
I actually told him what to look for while building the car and I gave him a little more detailed info than what he posted.
That being said, he did mention (and gave the link) to use the Team Durango online diff guide to build the trans as well as the turnbuckles.
I actually told him what to look for while building the car and I gave him a little more detailed info than what he posted.
#2618
Tech Fanatic
iTrader: (4)
I built a set today with 4* 1.2 and went with 25 F / 30 R with dark green springs
Little bit cold in the hall and lengthened to the outer position on the rear hub
Car seemed kinda lazy, might try 5wt thinner in both next time.
I ended up going back to my other set
6*1.2 / 40F and 6*1.3 35R with dark green and moving to the 3rd hole in the hub.
Felt a little better but think Ill have to go to the dark blue spring, 1 step harder as it was diving a bit in the corners
Thoughts on this?
#2619
What's up guys? I'm in dire need for some a-arm pivot balls. If you have any you can spare I'd be glad to pay you a couple bucks a piece to mail them to me. Can't seem to find any in stock anywhere and would like to race next weekend. Please help!
Here's the part I'm in need of.......
http://www.amainhobbies.com/product_...vot-Ball-Set-8
Here's the part I'm in need of.......
http://www.amainhobbies.com/product_...vot-Ball-Set-8
Chance... ill have em in stock on Wed.
Ill hold ya a set
Let me know
Lots of BO's are shipping...
Stav
#2620
For those of you running 17.5 blinky mode can you let me know what gearing seems to be working. I'm running on a medium sized indoor high bite clay track with a revtech 17.5. Thanks.
#2622
#2623
Hey Matt, what pinion and spur are you running?