Jake O

iTrader: (1)

what steering servo is a good fit with this truck?

enlighten

Hi All,

Great reading here!

I just ordered the plastic spur for my CRT.5.

How are they holding up to dirt, rocks etc?

Cheers

dravengary

iTrader: (8)

Can I run a Mamba max with a 5700 motor on one of these trucks Thanks Gary

Savage_Racing

iTrader: (4)

Since people run them in the Ofna 10SC I can't see why not.

dravengary

iTrader: (8)

I was told you have to run 1/8 scale size motor and esc because they heat 1/10th scale stuff up to much

russp

i run the 4600kv and its plenty fast, so the 5700 will be perfect. I can run a 6min main in it and temps are fine but run like 10-15 minutes the temps are pushin 170-180deg

dravengary

iTrader: (8)

Thanks so much What pinion size should I go with?

Crawler

iTrader: (6)

Getting back in the game Gary?

I just picked up a Hyper 10SC and I'll have the Jammin in a month or so.

Going to use Mamba Max for ESCs. I picked up a 4800 KV Medusa motor to run in one of them and I'm going to run a Neu 1409 1.5D (4500 KV) to run in the other.

Hope to see you at the OG SCT this Spring.

dravengary

iTrader: (8)

Sure am!!! is that you Joe?

russp

im running the 12 tooth 3mm shaft in mine. u may need go with the 11tooth, from what the other guys at my local track are running with their 5700 motors

dravengary

iTrader: (8)

You the man Thanks

Crawler

iTrader: (6)

You betcha!

russp

well i must say the Scrt held up really good to lastnights bashfest at Pegasus. For some reason when my two buddys and i hook up we just tear the crap outta our trucks.
All i broke was the front backside anti squat plate? and that was cuz i lawn darted and landed on top of the pipe. ripped the screws right outta the front diff case......ohh and make sure you tighten them Wheel nuts every once in a while...LOL
This is one badass truck! fer sure. after all the b.sin was done and i got some good laps in, the truck actully made me look like a decent driver.

Shark413

iTrader: (24)

I have used plastic gears on my 1/8's and they didn't last. But I have used my Jammin a couple of times and the spur still looks brand new. I am using a pretty big motor (Neu 1509) on 3s so there is plenty of power going thru the drivetrain.

hairdog

iTrader: (33)

Has anyone here ran these witht the Novak setup that nitrohouse is selling. I plan on buying one tomorrow and wanted to hear some reviews before I decided on a roller or this setup.