SC10 Thread
04-03-2009 | 07:54 PM
#92
Suspended
Joined: Mar 2009
Posts: 481
Finished up the assembly on mine this evening, and as JDCrow said the build is pretty straightforward and seemless if you have any T4/B4 experience.
I had removed the applicable FT parts from my T4, and they fit as suggested. I enjoyed building the geardiff and really like the fact they included a gasket to seal it. Picked up a set of TC4 CVDs this afternoon and they popped right in as promised also.
Guess I'll spend the masking and weekend painting.
I had removed the applicable FT parts from my T4, and they fit as suggested. I enjoyed building the geardiff and really like the fact they included a gasket to seal it. Picked up a set of TC4 CVDs this afternoon and they popped right in as promised also.
Guess I'll spend the masking and weekend painting.
04-03-2009 | 08:14 PM
#93
For everyone to post comments as they build their trucks.
I'll get started. First thing I did was thank the UPS Guy for safely delivering the box in one piece.
Then I took a deep breath so not to damage anything in my frenzy to open the box.
Took out the body, sat it next to my daughters Slash, and the dang Slash got the shakes.
Everything looks to be packaged and labeled for easy step by step building.
The Instruction pack includes the Die-Cut Decal Sheet, Manual, Catalog (with all the part numbers/exploded views/FT & Option Parts/electronics/fluids/ball diff option/you name it), and window mask.
I'll get started. First thing I did was thank the UPS Guy for safely delivering the box in one piece.
Then I took a deep breath so not to damage anything in my frenzy to open the box.
Took out the body, sat it next to my daughters Slash, and the dang Slash got the shakes.
Everything looks to be packaged and labeled for easy step by step building.
The Instruction pack includes the Die-Cut Decal Sheet, Manual, Catalog (with all the part numbers/exploded views/FT & Option Parts/electronics/fluids/ball diff option/you name it), and window mask.
04-03-2009 | 08:19 PM
#94
So I finally recived my SC10 last friday thanks to the guys over at AE. I finaly got my electronics in and ran it for the first time in front of my house. This is my set up so far:
suspension- FT threaded shock bodys w/ ti nitrate shafts
Rear settings- stock
Front settings- 35 wt. oil w/ gold springs and #2 pistions
Motor- 17.5 orion vortec brushless
Speed-o- LRP Sphere TC spec
Servo- Futaba S9350
Reciver- Spektrum
Also addd: Ti turnbuckles
Cvd's
Tru-rc body wrap
Attachment 436640
suspension- FT threaded shock bodys w/ ti nitrate shafts
Rear settings- stock
Front settings- 35 wt. oil w/ gold springs and #2 pistions
Motor- 17.5 orion vortec brushless
Speed-o- LRP Sphere TC spec
Servo- Futaba S9350
Reciver- Spektrum
Also addd: Ti turnbuckles
Cvd's
Tru-rc body wrap
Attachment 436640
Like the other guys said, Some bigger pics would be good.
04-03-2009 | 08:27 PM
#95
Here is a pic of the Decal Sheet included in the kit.
There are several Replica Decal Sheets listed in the option parts list, but I believe it will be a little while before they circulate.
9843 SC10 KMC Decal Sheet
9844 SC10 Lucas Oil Decal Sheet
9845 SC10 Bully Dog Decal Sheet
9846 SC10 Pro Comp Decal Sheet
9847 SC10 AE Team Decal Sheet
There are Black KMC Wheels available as options.
9807 SC10 KMC Wheel Front (black)
9808 SC10 KMC Wheel Rear (black)
9812 SC10 KMC Wheel/Tire Front (black)
9813 SC10 KMC Wheel/Tire Rear (black)
There are several Replica Decal Sheets listed in the option parts list, but I believe it will be a little while before they circulate.
9843 SC10 KMC Decal Sheet
9844 SC10 Lucas Oil Decal Sheet
9845 SC10 Bully Dog Decal Sheet
9846 SC10 Pro Comp Decal Sheet
9847 SC10 AE Team Decal Sheet
There are Black KMC Wheels available as options.
9807 SC10 KMC Wheel Front (black)
9808 SC10 KMC Wheel Rear (black)
9812 SC10 KMC Wheel/Tire Front (black)
9813 SC10 KMC Wheel/Tire Rear (black)
04-03-2009 | 09:37 PM
#97
[QUOTE=
Picked up a set of TC4 CVDs this afternoon and they popped right in as promised also.
[/QUOTE]
Are the TC4 Cvds the only ones that work with the gear diff? What about with ball diff tranny? Thanks JoJo
Picked up a set of TC4 CVDs this afternoon and they popped right in as promised also.
[/QUOTE]
Are the TC4 Cvds the only ones that work with the gear diff? What about with ball diff tranny? Thanks JoJo
04-04-2009 | 11:45 AM
#100
Body FYI
A quick note with regard to mounting the body. My painter and I were discussing the project scheme
We noticed that the mounting location dimples on the rear are marked incorrectly. The dimples are to wide for the rear post.
Check and mark the appropriate location before you ream the holes.
We noticed that the mounting location dimples on the rear are marked incorrectly. The dimples are to wide for the rear post.
Check and mark the appropriate location before you ream the holes.
04-04-2009 | 11:59 AM
#101
Suspended
Joined: Mar 2009
Posts: 481
A quick note with regard to mounting the body. My painter and I were discussing the project scheme
We noticed that the mounting location dimples on the rear are marked incorrectly. The dimples are to wide for the rear post.
Check and mark the appropriate location before you ream the holes.
We noticed that the mounting location dimples on the rear are marked incorrectly. The dimples are to wide for the rear post.
Check and mark the appropriate location before you ream the holes.
