|
Originally Posted by kdub
(Post 5636309)
The SC10 gearbox is wider at the diff.... to accomodate the gear diff. Also it fits 10 x 16 mm bearings instead of 3/8 x 5/8 bearings from the GT ball diff.
To fit the SC10 gearbox in a T4 you also need to change to the SC10 rear chassis plate. because it is going to get asked about 3,000 times in the next 6 months. |
Originally Posted by TRU-RC
(Post 5636160)
So I finally recived my SC10 last friday thanks to the guys over at AE. I finaly got my electronics in and ran it for the first time in front of my house. This is my set up so far:
suspension- FT threaded shock bodys w/ ti nitrate shafts Rear settings- stock Front settings- 35 wt. oil w/ gold springs and #2 pistions Motor- 17.5 orion vortec brushless Speed-o- LRP Sphere TC spec Servo- Futaba S9350 Reciver- Spektrum That truck looks tough, can you put a bigger pic up? Also addd: Ti turnbuckles Cvd's Tru-rc body wrap Attachment 436640 That truck looks tough, can you put a bigger pic up. I bought mine to bash with, its going to get a new (bought them really cheap) Cobalt 9 double and a Novak GTX, should be a handful!! |
were can i get a tru-rc body wrap? thats awsome
|
Ditto.
|
well lets try something. all I see on slash threads are arguments....
SLASHES ARE REAL RACE TRUCKS:lol::lol::lol::lol::lol::lol:/ sc10's are frail little radioshack knockoffs |
The SC10 has mudflaps! :nod:
|
Originally Posted by MDB
(Post 5636229)
Damn, now I wish I didn't waste my money on this Slash. Oh well, by the time I can afford the SC10, the trucks won't be on backorder anymore.:lol:
|
Originally Posted by charly71
(Post 5637078)
were can i get a tru-rc body wrap? thats awsome
|
Originally Posted by MDB
(Post 5636229)
Damn, now I wish I didn't waste my money on this Slash. Oh well, by the time I can afford the SC10, the trucks won't be on backorder anymore.:lol:
|
Originally Posted by Lightin'
(Post 5637530)
Then that explain why slashes are available now at PepBoys. :lol::lol::lol::lol::lol::lol:
|
Originally Posted by wwoodruff
(Post 5637131)
The SC10 has mudflaps! :nod:
Now that is funny. :lol::lol::lol::lol::lol::lol: |
Finished up the assembly on mine this evening, and as JDCrow said the build is pretty straightforward and seemless if you have any T4/B4 experience.
I had removed the applicable FT parts from my T4, and they fit as suggested. I enjoyed building the geardiff and really like the fact they included a gasket to seal it. Picked up a set of TC4 CVDs this afternoon and they popped right in as promised also. Guess I'll spend the masking and weekend painting. :nod: |
Originally Posted by JDCrow
(Post 5627539)
For everyone to post comments as they build their trucks.
I'll get started. First thing I did was thank the UPS Guy for safely delivering the box in one piece. Then I took a deep breath so not to damage anything in my frenzy to open the box. Took out the body, sat it next to my daughters Slash, and the dang Slash got the shakes. Everything looks to be packaged and labeled for easy step by step building. The Instruction pack includes the Die-Cut Decal Sheet, Manual, Catalog (with all the part numbers/exploded views/FT & Option Parts/electronics/fluids/ball diff option/you name it), and window mask. |
Originally Posted by TRU-RC
(Post 5636160)
So I finally recived my SC10 last friday thanks to the guys over at AE. I finaly got my electronics in and ran it for the first time in front of my house. This is my set up so far:
suspension- FT threaded shock bodys w/ ti nitrate shafts Rear settings- stock Front settings- 35 wt. oil w/ gold springs and #2 pistions Motor- 17.5 orion vortec brushless Speed-o- LRP Sphere TC spec Servo- Futaba S9350 Reciver- Spektrum Also addd: Ti turnbuckles Cvd's Tru-rc body wrap Attachment 436640 Like the other guys said, Some bigger pics would be good.:nod: |
1 Attachment(s)
Here is a pic of the Decal Sheet included in the kit.
There are several Replica Decal Sheets listed in the option parts list, but I believe it will be a little while before they circulate. 9843 SC10 KMC Decal Sheet 9844 SC10 Lucas Oil Decal Sheet 9845 SC10 Bully Dog Decal Sheet 9846 SC10 Pro Comp Decal Sheet 9847 SC10 AE Team Decal Sheet There are Black KMC Wheels available as options. 9807 SC10 KMC Wheel Front (black) 9808 SC10 KMC Wheel Rear (black) 9812 SC10 KMC Wheel/Tire Front (black) 9813 SC10 KMC Wheel/Tire Rear (black) |
Originally Posted by charly71
(Post 5637078)
were can i get a tru-rc body wrap? thats awsome
|
[QUOTE=
Picked up a set of TC4 CVDs this afternoon and they popped right in as promised also. [/QUOTE] Are the TC4 Cvds the only ones that work with the gear diff? What about with ball diff tranny? Thanks JoJo |
Originally Posted by jmonte23
(Post 5638376)
Are the TC4 Cvds the only ones that work with the gear diff? What about with ball diff tranny? Thanks JoJo
|
Originally Posted by Fabulous
(Post 5638388)
I beleive he meant the T4 cvd.
Thanks for clearing that up! |
Body FYI
A quick note with regard to mounting the body. My painter and I were discussing the project scheme
We noticed that the mounting location dimples on the rear are marked incorrectly. The dimples are to wide for the rear post. Check and mark the appropriate location before you ream the holes. |
Originally Posted by JDCrow
(Post 5640048)
A quick note with regard to mounting the body. My painter and I were discussing the project scheme
We noticed that the mounting location dimples on the rear are marked incorrectly. The dimples are to wide for the rear post. Check and mark the appropriate location before you ream the holes. |
Thanks for the tip. :nod:
|
Originally Posted by TRU-RC
(Post 5638316)
I should have the SC10 wraps up on the site this weekend.
|
1 Attachment(s)
Originally Posted by charly71
(Post 5640149)
as soon as you get some sc10 wrap pics up i may buy a set.
There you go. :) |
Asked in the other SC10 thread, but unanswered.
Will the Mamba Max/5700 combo work in the SC10? Looking to save a few bucks and move it over to the SC10 from the Slash and put the stock back in the Slash.
|
yes, the mamba max and 5700 will go in the SC10. Or u could pick up a novak 13.5 or 17.5 for $150.
|
If your paying $150 for a novak motor your getting rapped. There $90 pretty much everywhere.
DK |
Originally Posted by PartTime
(Post 5648348)
If your paying $150 for a novak motor your getting rapped. There $90 pretty much everywhere.
DK |
I meant for a Novak motor and speed contol...then he can keep his mamba setup for the slash.
|
Originally Posted by TfnG
(Post 5648367)
I meant for a Novak motor and speed contol...then he can keep his mamba setup for the slash.
DK |
The Havoc Novak systems can be had for $150 or less.
|
Im not familiar with that system. Had to look it up. If your never gonna run hotter than an 8.5 looks pretty good. But really surprized it can only handle a stock brushed and not a 19 turn. All in all looks like a nice package. I might have to get one for my son.
DK |
Since the ROAR SCT class is limited to 17.5/27T, I was going to get one of these systems eventually. I think right now I am going to get a SC10 and burn up the last of my brushed motors then change over.
|
Originally Posted by PartTime
(Post 5648405)
Im not familiar with that system. Had to look it up. If your never gonna run hotter than an 8.5 looks pretty good. But really surprized it can only handle a stock brushed and not a 19 turn. All in all looks like a nice package. I might have to get one for my son.
DK I've also got 2 XBRs (predecessor to the Havoc) in other cars. If you aren't running below 8.5 turn, they are great, inexpensive ESC's. |
Originally Posted by Toddzilla
(Post 5648435)
I've got a Havoc with an 8.5T in my XXX-4 and it works great.
I've also got 2 XBRs (predecessor to the Havoc) in other cars. If you aren't running below 8.5 turn, they are great, inexpensive ESC's. DK |
Originally Posted by PartTime
(Post 5648529)
I see you can tailor the throttle profile. Is it on/off or adjustable like the LRP? I have a Sphere and love the adjustablity, I run carpet and dirt, just afraid it wont have the punch needed for high traction like carpet.
DK |
On topic, I was shopping on ultimatehobbies.com today and saw that their website said that they have SC10s in stock.
I was tempted.....but I resisted. |
got mine today build starts tonight!:smile:
|
Originally Posted by backyardracer
(Post 5648992)
got mine today build starts tonight!:smile:
I hope to be saying the same thing tomorrow. |
Originally Posted by Toddzilla
(Post 5648945)
You can select different pre-determined profiles. It hasn't been an issue for me.
Mine should be here in the next couple of days.It will see carpet duty first. Im thinking the slash tires might be better for carpet or hard pack then the stock ones. Anybody else run on carpet? DK |
| All times are GMT -7. It is currently 05:23 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.