HoBao Hyper 9E thread
#196
Tech Initiate
picture of hyper9 e
I got mine late last week and ran my first race with it on Sunday. I ran it stock out of the box with 30wt AE shock oil front and rear. Ran first 2 quals with a Tekin Rx8controller and 1700 kv buggy motor on 5s. Controller smoked in second qual. I pulled my Castle mmm v3 and Neu 1700kv motor out of my RC8 and installled it in time to make the 3rd qual and main. There were only 4 1/8 scale electrics in my class. I had TQ and won the A main. The car handles awesome I was blown away by how great it handles and I havent tuned any thing on it yet. I have a RC8 with a rc monster conversion chasis that i have been racing for the last months. The Hyper 9 out of the box did everything i have been trying to do with the RC8. Hyper 9 has great turn in on and off power. It was a little unstable at high speed but its over geared with the 1700 motor. With the Tekin motor I was only able to fit a 16 pinion without the can being to close to the drive shaft. With the Nue <smooth can> 1700 3d there is more room but i didnt have time to see if a 15 pinion would fit but im sure it well, the Tekin motors a little bigger. No temp problems motor was 145 and controller was about the same. I think a 1400 0r 1500kv motor will be a better fit on 5s. I bought the 9e as a practice car to tune this season at practice to maybe run over the winter. After driving it the RC8 is going on the shelf and this will be used as my main car. Im going to order another one this week. The car was solid no broken parts, the only problem i had was I landed hard on the left front and it poped the steering arm off the front hub. not crazy about how they made that, going to have to find a more solid option. LOVE THE CAR!!!
i would like to discover more about this.
#198
Tech Adept
New Hyper 9E
Here's my Hyper 9E! This is my first freehand paint job! All I need now is the Tekin System and to get it on the track!
#199
Stone Guard
Cleaning this buggy after its first race was brutal. Not having stone guards with the giant body that doesnt fit the car = a mess! My first mod was to fit a guard on the right side. The right takes all the damage <Servo, ESC, transmitter box, and motor> The left side doesnt have anything to get destroyed, the battery box takes the beating. FYI the body is a JC High flow for a RC8 trims out fine.
#200
Tech Adept
what mud guard did you use?
#202
Tech Adept
no, I am not good enough for that
#203
GLITCHING
Hey guys ive been reading this since i put an order in for my hyper 9 e a month ago i got it yesterday and im getting mad glitching what i have all brand NEW novak hv 5.5 with deans 2 2s max amp lipos 6500 futaba magnum 2pl and reciever and at about 25 feet it glitches stupid like i said everything is new????? i need help ive tried all the braiding wires and twisting the battery wires the servo leads so WTF lol
#204
Tech Legend
iTrader: (294)
Is the PL an AM Radio?
Please post pics of your chassis setup
Assuming you have the receiver mounted in the receiver box, do you have anything seperating the actual receiver from the chassis? (ie- foam pad, etc). Maybe you are getting some sort of interference from the receiver sitting on the chassis?
Please post pics of your chassis setup
Assuming you have the receiver mounted in the receiver box, do you have anything seperating the actual receiver from the chassis? (ie- foam pad, etc). Maybe you are getting some sort of interference from the receiver sitting on the chassis?
#205
Is the PL an AM Radio?
Please post pics of your chassis setup
Assuming you have the receiver mounted in the receiver box, do you have anything seperating the actual receiver from the chassis? (ie- foam pad, etc). Maybe you are getting some sort of interference from the receiver sitting on the chassis?
Please post pics of your chassis setup
Assuming you have the receiver mounted in the receiver box, do you have anything seperating the actual receiver from the chassis? (ie- foam pad, etc). Maybe you are getting some sort of interference from the receiver sitting on the chassis?
I read some where else that a guy was having the same prob and he put his old HV Novak in (4400kv) with the same radio and got 0 glitching he the put the newer HV in and as the same glitched he sent it back to Novak twice both times they said it was fine. he even when out and bought a 2.4g radio and still got the same ANYONE HERE WANNA BUY A NOVAK LOL ONLY 2 RUNS AND BOTH WERE ONLY 5 MINS LONG LOL
#208
got it to stop glitching once i put the older model hv in (4400kv) now the only prob older HV esc has no option for rotor direction
#209
Cleaning this buggy after its first race was brutal. Not having stone guards with the giant body that doesnt fit the car = a mess! My first mod was to fit a guard on the right side. The right takes all the damage <Servo, ESC, transmitter box, and motor> The left side doesnt have anything to get destroyed, the battery box takes the beating. FYI the body is a JC High flow for a RC8 trims out fine.
#210
What batteries are they when we had 20c lipos the esc is drawing so much current that it's cogging to get up to speed, if you have friend with some bats that 25c or more then try it.