RC10T Parts swat from T4?????
02-02-2008, 05:05 PM
#16
Tech Apprentice
iTrader: (3)
it`s not to hard to mount a T4 body and i run all modern electronics in mine 9550 digital futaba servo sidewinder/4600 brushless spektrum and lipo had to move the battery tray 1/4" forward to fit modern batteries and a 2.65 ratio RPM tranny conversion in the 2.25 ratio stealth tranny
Last edited by 52zmaster; 02-02-2008 at 07:50 PM.
02-03-2008, 07:48 PM
#18
ALmost every part from a RC10 GT(not the GT2) will fit. I converted a old worlds car to a electric truck about 6 years ago when they outlawed gas trucks at parking lot track I was racing. The arms mounts shock towers all bolt up. The only funky thing I had to do was make a new brace for tranny to rear bulkhead. ANd that was easy just bent a piece of alum up. Drilled acouple of holes in and away you go.
In regards to the GT and GT2 you are correct.
02-03-2008, 08:13 PM
#19
RC10GT Parts work on the RC10T
02-17-2008, 07:20 PM
#20
HELLO all
HELLO all, I am glad there is a sight like this, I pick up my RC 10 T new back in the early 90s, race it for many years and finely retired it ,
Well Here in Portland Oregon last year myself, mywife and the owner of our track/hobbie shop we all started what is called THE Vintage class, Rigs has to be from about 1990s back, or befor ,
The one thing about our class is some of the ruels was change for we had to for a lack of parts, BUT I will not have brushless in our class but lipos are wellcome, Gold pan assocated and LXT losi back,
Well I have been pushing for the class since last summer and we finely have it up and runing, I will be sure to let my team know about this link, I just want to say thank you to those that has stated it , I know this link will help us as time goes on,
DON That Portland Rustbucket , RC 10 T ,
Well Here in Portland Oregon last year myself, mywife and the owner of our track/hobbie shop we all started what is called THE Vintage class, Rigs has to be from about 1990s back, or befor ,
The one thing about our class is some of the ruels was change for we had to for a lack of parts, BUT I will not have brushless in our class but lipos are wellcome, Gold pan assocated and LXT losi back,
Well I have been pushing for the class since last summer and we finely have it up and runing, I will be sure to let my team know about this link, I just want to say thank you to those that has stated it , I know this link will help us as time goes on,
DON That Portland Rustbucket , RC 10 T ,
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
