R/C Tech Forums - JConcepts Thread

I'm going to need those ball cups... I hate doing ball cups but those will be worth it. i always use a rag over my ball cups when popping them so that I dont scar them. Lol

Rick442

07-22-2013 09:17 AM

1 Attachment(s)

http://www.rctech.net/forum/attachme...1&d=1374509807

beedee

07-22-2013 09:32 AM

^ awesome! I will try these out when it comes time to replace my RPM's.

PW	07-22-2013 10:11 AM

Quote:

Originally Posted by boostem (Post 12370452)

I am looking for a truggy body that will fit my Hot Bodies D8T. Which JConsepts body would work best?

We discontinued our D8T body; you might want to look at the Mugen body. You will have to do the front body mount mod like the PL guys do.

Quote:

I'm going to need those ball cups... I hate doing ball cups but those will be worth it. i always use a rag over my ball cups when popping them so that I dont scar them. Lol

The new cups are working very well, but I recommend pre-tapping them or using a little bit of grease on the treads. They are made with a much harder material and are tight on the threads.

Rick442

07-22-2013 11:19 AM

are the 4 angled ball cups used to move the rear camber link away from the rear shock ?

Jmuck69

07-22-2013 11:24 AM

Quote:

Originally Posted by PW (Post 12371394)

We discontinued our D8T body; you might want to look at the Mugen body. You will have to do the front body mount mod like the PL guys do.

The new cups are working very well, but I recommend pre-tapping them or using a little bit of grease on the treads. They are made with a much harder material and are tight on the threads.

The standard AE tie rods will work with these?

PW	07-22-2013 12:31 PM

Quote:

Originally Posted by Rick442 (Post 12371645)

are the 4 angled ball cups used to move the rear camber link away from the rear shock ?

They are actually designed to give more clearance for the rear wheel on the outer hub, but you could use them on the inside to help get a little extra clearance for the shock.

Quote:

The standard AE tie rods will work with these?

Yes

Grasschopper

07-22-2013 12:40 PM

Quote:

Originally Posted by PW (Post 12371879)

They are actually designed to give more clearance for the rear wheel on the outer hub, but you could use them on the inside to help get a little extra clearance for the shock.

Need 4 of them in the kit.

Autocratic

07-22-2013 12:45 PM

Paul,

When are the new cups available to the public?

Jake S

07-22-2013 12:48 PM

Quote:

Originally Posted by Autocratic (Post 12371928)

Paul,

When are the new cups available to the public?

http://www3.towerhobbies.com/cgi-bin...?&I=LXDPPA&P=7

BIGSKI15

07-22-2013 01:46 PM