MrLean

iTrader: (17)

Are you using a rear sway bar? If so, try taking it off.

I haven't run truck there, but I run SCT there and you need to soften up the rear.

Falling

Hm ill give that a shot. It has a 1.8 in the rear which is very excessive. Most people seem to run a 1.2 or a 1.3 it seems. i"ll give it a try this Saturday for sure

Since that post ive torn the diff apart and apparently their was barley and fluid in it. Ive filled it with 10k weight and im going to try that again.

For shocks I have 40 weight and silver springs on it all the way around.

ollie 45

iTrader: (29)

I have the Jovy Levin setup on my truck and it is pretty good at Limitless and Cooters in Alma. It is gray carpet vs turf but should still be a starting point i would think.

jtodd57

iTrader: (1)

I used the Jovy Levin setup on Sunday at RCOne.....thats a great baseline!

Falling

Sounds like that setup will be my move. Anybody got a link to it? Couldn't seem to find it.

Thanks for the help guys!

Kraig

iTrader: (81)

I think this is the one they are talking about.

https://img2.associatedelectrics.com...est_Carpet.pdf

Other setups can be found here.
https://www.associatedelectrics.com/...anuals_setups/

Falling

Perfect thank you!

Cinnabun

iTrader: (39)

I also used the Jovy set-up as a baseline, Im on carpet. Needed a few tweaks but its a solid starting point

edman4523

Any speculation or rumors of a T7 version? Or just a new release.

edman4523

They have this kit at a deep discount currently. Trying not to buy it.

frankf

iTrader: (4)

At a guess I'd say T6.3 which essentially would be the equivalent of the B6.4, surely they couldn't go T7 before the 2wd buggy

big james

iTrader: (144)

anyone have any details on when the new kit might be available?

76jimmy

iTrader: (28)

aracefan

iTrader: (70)

Just getting around to building my T6.2 up (... don't ask. LOL!) and was wondering what you guys are running on CRC carpet for the gear diff.
I'm going with Jovy Levin's setup as a base starting point, but he doesn't specify if he is running 2 gears or 4 gears in the diff. What are most of you running??
I built it up with 4 gears and 5k fluid (instead of the 10k he specified, but that's easily changed and I run that in my buggy, and seems to work fine).

I will say this kit has been a joy to build, I know most don't like that AE kits still come a few parts on 'sprues' but I build plastic models so doesn't bother me in the slightest. I go over and trim all the plastic bits of any kit I build. And feel that next to Xray, Associated have some of the best shocks available.

MrLean

iTrader: (17)

I usually run 4/10k or 2/20k in all my AE vehicles, depending on the layout.