Schumacher stadium truck
#46
Tech Adept
anyone know if the associated or losi bodies fit this stadium truck?
#47
Tech Initiate
Yes, the JC concept bodies for both will fit.
#48
Tech Adept
Storm ST2
https://www.racing-cars.com/storm-st2-kit-k200
There are a variety of updates (e.g. new front hubs and yokes).
https://www.racing-cars.com/storm-st2-kit-k200
There are a variety of updates (e.g. new front hubs and yokes).
Last edited by Typpo; 08-09-2023 at 07:44 PM. Reason: Typo
#49
Storm ST2
https://www.racing-cars.com/storm-st2-kit-k200
There are a variety of updates (e.g. new front hubs and yokes).
https://www.racing-cars.com/storm-st2-kit-k200
There are a variety of updates (e.g. new front hubs and yokes).
Schumacher will sell very few of these so it is surprising that they would introduce brand new parts just for the stadium truck.
#50
Tech Adept
Storm ST2
https://www.racing-cars.com/storm-st2-kit-k200
There are a variety of updates (e.g. new front hubs and yokes).
https://www.racing-cars.com/storm-st2-kit-k200
There are a variety of updates (e.g. new front hubs and yokes).
One thing that's quite significant for me is the new battery fitment - I use square pack lipos in my ST and they are a perfect fit. Doesn't look like that will be an option on the ST2
#51
Tech Adept
Based on the manuals, the front hub bearings have been upsized.
Storm ST
inside bearing: ø4 x ø8 x 3mm
outside bearing: ø5 x ø9 x 3mm
Storm ST2
inside bearing: ø5 x ø10 x 3mm
outside bearing: ø5 x ø10 x 4mm
Storm ST
inside bearing: ø4 x ø8 x 3mm
outside bearing: ø5 x ø9 x 3mm
Storm ST2
inside bearing: ø5 x ø10 x 3mm
outside bearing: ø5 x ø10 x 4mm
#52
Tech Adept
#53
whoah, I didn’t know that, thanks for sharing!
#54
Tech Adept
#55
Tech Adept
#58
Tech Adept
I'm still loving the Storm St and not upgraded to the ST2 yet, but my car is due a rebuild and I've got some upgrades to put on it:
- LD3 shock caps (U8555)
- LD2 alloy front link mount (U8026)
- LD2 alloy rear link mount V2 (U7651)
I've got L1R alloy rear hubs to fit as well.
Any other good ST2 or LD3 parts worth getting?
- LD3 shock caps (U8555)
- LD2 alloy front link mount (U8026)
- LD2 alloy rear link mount V2 (U7651)
I've got L1R alloy rear hubs to fit as well.
Any other good ST2 or LD3 parts worth getting?
#59
I picked up a used st2, I’m running on high grip clay, any idea of what shock pistons to run? Currently, I am running 3x1.5 F and 3x1.6 rear with 500/400 oil, grey AE front spring and white AE rear spring 13mm.