Lets see your Hot Rods
Lets see your Hot Rods...
Running a Drag Race Concepts Maxim with Maclan DRK 160 and DRK 3.0T motor. https://cimg9.ibsrv.net/gimg/www.rct...4041c4862.jpeg |
Running the Five Star Hobbies B6 street sweeper with a Hobbywing XR10 pro Legacy and a Fantom 3T motor.
https://cimg8.ibsrv.net/gimg/www.rct...0165173e44.jpg |
https://cimg0.ibsrv.net/gimg/www.rct...c147b1006e.jpg
It was a Five Star B6.1 Sweeper but I've recently swapped to a custom aluminum chassis. Surpass v4s 4.0t... Tekin RS Pro till it explodes. I wish I would have snapped some good pictures before it got all the road rash... |
[QUOTE=massenb203;15902298]Running the Five Star Hobbies B6 street sweeper with a Hobbywing XR10 pro Legacy and a Fantom 3T motor.
How long have you been running the Fantom 3.0T on that Hobbywing? I have a 4.0T Fantom on my Legacy, and am not totally confident that I won’t fry it. Especially once I drop a 3.0T Dragmaster onto it, that I’m building. Of course I have a MMX 6s I’m gonna put in it, but I’d like to buy another chassis and run the 4.0T/ Legacy setup on it or vise versa. I’m just curious as to what kind of voltage drops you’re seeing, and with what battery/ cap pack combo? |
I have been running this setup for a while with no issue and a KV rating of 10,240.
|
They seem to list the specs differently now, but IIRC, that was the big deal to the XR10 Legacy. It used to list no motor limit on 2s. It also supports 4-pole motors, which you usually have to go with an 1/8 scale esc for. But... It seems now the specs are identical to the other XR10s. That said, I've seen them rightfully abused in the name of drag racing and the motor sensor board usually blows before the esc does.
|
https://cimg1.ibsrv.net/gimg/www.rct...e4874654a6.jpg
https://cimg2.ibsrv.net/gimg/www.rct...9ddb2cde3b.jpg Working on a FWD from a old Tamyia FF I have. I used to race this against 4wd touring cars ages ago when I got into the TCS series as it was a easy trade for it at the time then I got my TA03R. Have a bunch of old touring cars 1/10 and 1/12 cars original RC10 and RC12's as well as my B3 and T3 looking to build a No Prep too probably will be a DR10. |
caddy
https://cimg1.ibsrv.net/gimg/www.rct...7cfd0399cd.jpg
tarp DR 10 conversion, rx 8 tekin with phantom 2.5 rotor ron motor on blue dots reactions |
https://cimg9.ibsrv.net/gimg/www.rct...1866b36d2.jpeg
Not sure if anyone else has done a XXX based drag car, but here’s mine! |
Originally Posted by Denver_Larry
(Post 15926089)
https://cimg9.ibsrv.net/gimg/www.rct...1866b36d2.jpeg
Not sure if anyone else has done a XXX based drag car, but here’s mine! |
Originally Posted by Denver_Larry
(Post 15926089)
https://cimg9.ibsrv.net/gimg/www.rct...1866b36d2.jpeg
Not sure if anyone else has done a XXX based drag car, but here’s mine! |
Originally Posted by Antimullet
(Post 15926838)
THE PAINT IS DIALED!!!
|
https://cimg2.ibsrv.net/gimg/www.rct...3c8d00f9f3.jpg
I run this in our VXL class. I won the body in a raffle |
Finally joined the No Prep and Slash owners clubs!
A friend and I went in on the deal Traxxas offered and snagged these two. His is the Green truck while mine is the Blue, though we had originally wanted the Red and Black trucks, they were just back ordered at the time, so these were what we got instead. https://hosting.photobucket.com/imag...ender(117).jpg The longer we looked at them, the more neither one of us wanted to scrape up those C10s, so he’s going to get a J-Concepts Fox Body Mustang while I’m thinking way inside the box for now, especially since I had it laying around :D https://hosting.photobucket.com/imag...ender(135).jpg https://hosting.photobucket.com/imag...ender(136).jpg I know it won’t be “Legal”, but I’m not planning on going to sanctioned races with it just yet. |
All times are GMT -7. It is currently 09:25 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.