TeamX151

iTrader: (15)

Lets see your Hot Rods...

Running a Drag Race Concepts Maxim with Maclan DRK 160 and DRK 3.0T motor.

massenb203

Running the Five Star Hobbies B6 street sweeper with a Hobbywing XR10 pro Legacy and a Fantom 3T motor.

Nineball

It was a Five Star B6.1 Sweeper but I've recently swapped to a custom aluminum chassis. Surpass v4s 4.0t... Tekin RS Pro till it explodes. I wish I would have snapped some good pictures before it got all the road rash...

Darknight1201

[QUOTE=massenb203;15902298]Running the Five Star Hobbies B6 street sweeper with a Hobbywing XR10 pro Legacy and a Fantom 3T motor.

How long have you been running the Fantom 3.0T on that Hobbywing? I have a 4.0T Fantom on my Legacy, and am not totally confident that I won’t fry it. Especially once I drop a 3.0T Dragmaster onto it, that I’m building. Of course I have a MMX 6s I’m gonna put in it, but I’d like to buy another chassis and run the 4.0T/ Legacy setup on it or vise versa. I’m just curious as to what kind of voltage drops you’re seeing, and with what battery/ cap pack combo?

massenb203

I have been running this setup for a while with no issue and a KV rating of 10,240.

Nineball

They seem to list the specs differently now, but IIRC, that was the big deal to the XR10 Legacy. It used to list no motor limit on 2s. It also supports 4-pole motors, which you usually have to go with an 1/8 scale esc for. But... It seems now the specs are identical to the other XR10s. That said, I've seen them rightfully abused in the name of drag racing and the motor sensor board usually blows before the esc does.