rcfoxhound

iTrader: (14)

Hey guys anyone know of a hop- up for xray t3,front halfshaft crosspin,slider or roller kit going in front spool. Thanks

Johnny Wishbone

iTrader: (6)

? could you be clearer on what your asking??

rcfoxhound

iTrader: (14)

The rear halfshafts use caps or sliders on the crosspins where it goes into diff outdrive i was wondering if they had something for the spool in front diff.It is the curved cup in picture.Thanks

Johnny Wishbone

iTrader: (6)

The "U" piece is called a pin cushion. As far as the spool goes, it depends on what outdrives your using. The stock parts are a delron outdrive and don't use a pin cushion, they tend to get beat up after a while and break from the torque or ream out and get sloopy, they have to be replaced on a regular basis. The option parts are either aluminum or steel and both of these use the pin cushions with these parts, so the only thing you'll change are the pin cushions. Then there are after market versions that still use pin cushions but capture them better and apply the load better over the entire pin cushion. These are made by Flying Fox, which are very hard to come by, or Side Piece Racing which is Mike Halunics deal, and are more readily available.

Hope that answers your question.

rcfoxhound

iTrader: (14)

Would you have link to the aftermarket parts.Thanks

Johnny Wishbone

iTrader: (6)

http://www.sidepieceracing.com/

zaraz

iTrader: (38)

hi i pmed you regarding the xray let me know

prairie rc

Thanks to everyone who came out today. Hope you all had fun today. See you guys Wednesday.
Ryan

fullout

The Side Piece Racing Nikita outdrives for the spool are awesome. The pin cushions last a lot longer for sure. I have a set on both my t311's. And you can run either 50 or 52 mm without worrying about breaking the kit outdrives or opening up the xray alu. upgrade ones.

rcfoxhound

iTrader: (14)

Johnny W Fullout .Thanks

prairie rc

Hey everyone.
Hope everyone is having fun so far this season. Just want to see how everyone is enjoying the Friday night practice.

Ryan

rcfoxhound

iTrader: (14)

I prefer fridays to wed easier to try stuff.Thanks

prairie rc

Thanks for coming out everyone. Hope to see you all Sunday.

damage

Fun racing today guys. Everybody was close, clean and fast, the new style barriers are making everybody a better driver and it shows.

More people coming out week by week. Looking forward to seeing a few more familiar faces and new faces as well.

Just a reminder there is racing on Wednesdays and Sundays. Open practice is on Fridays, so if you're more into playing than racing then Friday is great for that.

Warren

mtbboy

iTrader: (1)

Yeah plus one.
Racing was so clean I still havent showered.

Nice to see the numbers going up steadily.

Ive never just laid down sooo many laps, What a treat this has been!