2010/2011 WCICS Official Thread
#316
Tech Regular
iTrader: (1)
Wow, I haven't read this thread in awhile. All this
talk about roar rules in regards to classes motors and batteries being roar approved, I think some of the other rules have been ignored...
Everyone "should" be prepared to have their cars teched to roar rules including having the motors disassembled to check for anything illegal. Wing height, body height and track width also. It's been a few years since I've raced a roar race but This shouldn't be an issue seeing that everyone had 9 weeks plus to prepare for this season.
On another note since we're going so deep into roar rules I vote that all tracks must be roar and all members have memberships with roar.
talk about roar rules in regards to classes motors and batteries being roar approved, I think some of the other rules have been ignored...
Everyone "should" be prepared to have their cars teched to roar rules including having the motors disassembled to check for anything illegal. Wing height, body height and track width also. It's been a few years since I've raced a roar race but This shouldn't be an issue seeing that everyone had 9 weeks plus to prepare for this season.
On another note since we're going so deep into roar rules I vote that all tracks must be roar and all members have memberships with roar.
#317
Tech Regular
iTrader: (1)
Here ia some light reading for you guys.
http://www.roarracing.com/?page_id=10
102 pages
If your not sure about if your gear is approved or not.
http://www.roarracing.com/?page_id=14
Again shouldn't be an issues since we all had plenty of time to prepare.
http://www.roarracing.com/?page_id=10
102 pages
If your not sure about if your gear is approved or not.
http://www.roarracing.com/?page_id=14
Again shouldn't be an issues since we all had plenty of time to prepare.
#318
Edmonton WCICS
Spoke to Ian Da LaSalle (Edm WCICS Rep) today and this is how the weeekend should go.
Friday
Doors open at 3pm open practice untill 6pm
Controlled practice 6pm till 11pm
Saturday
07:30 to 09:00 open practice
09:00 track will close
09:00 registration will close
09:00 to 10:00 drivers meeting, concourse
10:00 first qualifier (3 qualifiers)
There will be 1 min 30 seconds between qualifiers no mercy minutes (BE READY)
There will be some more practice after the qualifiers, time permitting
Sunday
07:30 to 08:30 open practice
09:00 last qualifer
Mains
Thanks Limey
Remember the clocks go back saturday night'!!!!
Friday
Doors open at 3pm open practice untill 6pm
Controlled practice 6pm till 11pm
Saturday
07:30 to 09:00 open practice
09:00 track will close
09:00 registration will close
09:00 to 10:00 drivers meeting, concourse
10:00 first qualifier (3 qualifiers)
There will be 1 min 30 seconds between qualifiers no mercy minutes (BE READY)
There will be some more practice after the qualifiers, time permitting
Sunday
07:30 to 08:30 open practice
09:00 last qualifer
Mains
Thanks Limey
Remember the clocks go back saturday night'!!!!
#319
Spoke to Ian Da LaSalle (Edm WCICS Rep) today and this is how the weeekend should go.
Friday
Doors open at 3pm open practice untill 6pm
Controlled practice 6pm till 11pm
Saturday
07:30 to 09:00 open practice
09:00 track will close
09:00 registration will close
09:00 to 10:00 drivers meeting, concourse
10:00 first qualifier (3 qualifiers)
There will be 1 min 30 seconds between qualifiers no mercy minutes (BE READY)
There will be some more practice after the qualifiers, time permitting
Sunday
07:30 to 08:30 open practice
09:00 last qualifer
Mains
Thanks Limey
Remember the clocks go back saturday night'!!!!
Friday
Doors open at 3pm open practice untill 6pm
Controlled practice 6pm till 11pm
Saturday
07:30 to 09:00 open practice
09:00 track will close
09:00 registration will close
09:00 to 10:00 drivers meeting, concourse
10:00 first qualifier (3 qualifiers)
There will be 1 min 30 seconds between qualifiers no mercy minutes (BE READY)
There will be some more practice after the qualifiers, time permitting
Sunday
07:30 to 08:30 open practice
09:00 last qualifer
Mains
Thanks Limey
Remember the clocks go back saturday night'!!!!
#321
Tech Elite
iTrader: (2)
Spoke to Ian Da LaSalle (Edm WCICS Rep) today and this is how the weeekend should go.
Friday
Doors open at 3pm open practice untill 6pm
Controlled practice 6pm till 11pm
Saturday
07:30 to 09:00 open practice
09:00 track will close
09:00 registration will close
09:00 to 10:00 drivers meeting, concourse
10:00 first qualifier (3 qualifiers)
There will be 1 min 30 seconds between qualifiers no mercy minutes (BE READY)
There will be some more practice after the qualifiers, time permitting
Sunday
07:30 to 08:30 open practice
09:00 last qualifer
Mains
Thanks Limey
Remember the clocks go back saturday night'!!!!
Friday
Doors open at 3pm open practice untill 6pm
Controlled practice 6pm till 11pm
Saturday
07:30 to 09:00 open practice
09:00 track will close
09:00 registration will close
09:00 to 10:00 drivers meeting, concourse
10:00 first qualifier (3 qualifiers)
There will be 1 min 30 seconds between qualifiers no mercy minutes (BE READY)
There will be some more practice after the qualifiers, time permitting
Sunday
07:30 to 08:30 open practice
09:00 last qualifer
Mains
Thanks Limey
Remember the clocks go back saturday night'!!!!
You should host it then Gary and make it short and brief!
Ivan
#324
Yes being first race, you're probably right, there could be a few issues to resolve in registration.
#326
Tech Elite
iTrader: (2)
Help Please...
Anyone have by any chance bearings in the following size:
1/8 x 5/16 x 9/64 (non-flanged)
There are the bearings for 12th scale front tires.
If anyone got a set (2) or more, please let me know and I'll get them off you at the race.
Looking forward to some racing this weekend!
Ivan
1/8 x 5/16 x 9/64 (non-flanged)
There are the bearings for 12th scale front tires.
If anyone got a set (2) or more, please let me know and I'll get them off you at the race.
Looking forward to some racing this weekend!
Ivan
#327
Tech Elite
iTrader: (2)
Just wondering if Mandie is running the races again this year? She did an awesome job on the mic last year. Hope she gets to run a few classes herself this time. I'm bringing Susan up this year to race in Mini and GT and I hope she's not the only female running. Kevin, is Sonya up for some racing?
Ivan
#329
Tech Addict
iTrader: (40)
Anyone have by any chance bearings in the following size:
1/8 x 5/16 x 9/64 (non-flanged)
There are the bearings for 12th scale front tires.
If anyone got a set (2) or more, please let me know and I'll get them off you at the race.
Looking forward to some racing this weekend!
Ivan
1/8 x 5/16 x 9/64 (non-flanged)
There are the bearings for 12th scale front tires.
If anyone got a set (2) or more, please let me know and I'll get them off you at the race.
Looking forward to some racing this weekend!
Ivan
#330
Tech Elite
iTrader: (2)
Thanks Joe!
Ivan