7LikesTrukz Calgary - 1/10 Scale Off road Racing
11-24-2016, 08:49 AM
#1486
Tech Master
iTrader: (3)
Thought I would share this from facebook page.
post your reply on the facebook page
Trukz Calgary
13 hrs · Calgary, AB
So we are going to make the call out for help. We have located a very large amount of wood for our heating season for free, unfortunately we need hands.
Who would be willing to help just a few hours on Sunday morning to load or haul with us. We will also be asking Sat morning.
The wood is located approximately 8 kilometers West of Airdrie.
Please post up here if you can spare a couple hours to a warm cause. Remember, the warmer the building is the more we can race and keep our fees down.
Thank you, Curtis
13 hrs · Calgary, AB
So we are going to make the call out for help. We have located a very large amount of wood for our heating season for free, unfortunately we need hands.
Who would be willing to help just a few hours on Sunday morning to load or haul with us. We will also be asking Sat morning.
The wood is located approximately 8 kilometers West of Airdrie.
Please post up here if you can spare a couple hours to a warm cause. Remember, the warmer the building is the more we can race and keep our fees down.
Thank you, Curtis
11-24-2016, 10:16 AM
#1487
I gotta tell ya how rad it is to be racing indoor offroad!
Major kudos to all those that made this happen!
I hope to make most of these Saturdays!
Major kudos to all those that made this happen!
I hope to make most of these Saturdays!
11-24-2016, 12:06 PM
#1488
Hi All
Trukz is racing this Saturday as usual. Doors open at 10am, with racing to start at 11am. Please also remember to bring your old car/truck bodies to hang at the track. Feel free to attached you body to the conduit on the south wall of the building with a zip tie (bring your own zip tie).
See you out there.
Thanks
Aaron
Trukz is racing this Saturday as usual. Doors open at 10am, with racing to start at 11am. Please also remember to bring your old car/truck bodies to hang at the track. Feel free to attached you body to the conduit on the south wall of the building with a zip tie (bring your own zip tie).
See you out there.
Thanks
Aaron
11-28-2016, 07:07 AM
#1490
Tech Addict
Just want to let everyone know that we will be running a trial of 4wd buggy next Sat, it will be a max of 7 entries. Do not run out and start ordering your 4wd's, we are still seeing how this will go. If drivers are out of control and tear up the track it won't bode well for the class, so please keep this in mind. The list will be posted here, so your response is to this post or Trukz FB only please regarding racing.
Here's the list
Gary F
Rachel T
Chris C
Here's the list
Gary F
Rachel T
Chris C
11-28-2016, 04:58 PM
#1492
Tech Addict
11-29-2016, 07:36 PM
#1493
12-01-2016, 01:29 PM
#1497
Hi All
Trukz is racing this Saturday as usual. Doors open at 10am, with racing to start at 11am. Don't forget to contact Brian Timmermans if you want in on the 4X4 trial.
See you out there.
Thanks
Aaron
(Now that was not that hard to keep my own posts in our own thread, Scott didn't even have to show me
)
Trukz is racing this Saturday as usual. Doors open at 10am, with racing to start at 11am. Don't forget to contact Brian Timmermans if you want in on the 4X4 trial.
See you out there.
Thanks
Aaron
(Now that was not that hard to keep my own posts in our own thread, Scott didn't even have to show me
)
12-01-2016, 06:19 PM
#1499
Tech Regular
iTrader: (7)
Hi All
Trukz is racing this Saturday as usual. Doors open at 10am, with racing to start at 11am. Don't forget to contact Brian Timmermans if you want in on the 4X4 trial.
See you out there.
Thanks
Aaron
(Now that was not that hard to keep my own posts in our own thread, Scott didn't even have to show me)
Trukz is racing this Saturday as usual. Doors open at 10am, with racing to start at 11am. Don't forget to contact Brian Timmermans if you want in on the 4X4 trial.
See you out there.
Thanks
Aaron
(Now that was not that hard to keep my own posts in our own thread, Scott didn't even have to show me
)
12-01-2016, 06:43 PM
#1500
