78LikesBuy / Sell
01-17-2019, 06:14 AM
VBC Ghost EVO RM Roller Only
$100 OBO
This is the full Carbon Ghost Evo RM. New Chassis, top plate and rear shock tower. Upgraded battery strap. Box and manual included. Ran in Scale spec.
VBC D09 Roller Only
$225 OBO
Comes with aluminum chassis plus the original carbon chassis. Box and manual included. Recently rebuilt diff with 7k and shocks with 500cst. Misc. parts included
Will ship at buyers expense.
VBC
$100 OBO
This is the full Carbon Ghost Evo RM. New Chassis, top plate and rear shock tower. Upgraded battery strap. Box and manual included. Ran in Scale spec.
VBC D09 Roller Only
$225 OBO
Comes with aluminum chassis plus the original carbon chassis. Box and manual included. Recently rebuilt diff with 7k and shocks with 500cst. Misc. parts included
Will ship at buyers expense.
VBC
01-17-2019, 09:17 AM
Tamiya M05's for sale
Tamiya M05's for sale they are set up for previous race Track in Edmonton AB. Parts box with all extras I have 2-3 extra parts cars 1 M05v2 needs RX/TX, Lipo, Transponder and battery connection of your choice
Asking 400$ for the lot. Shipping costs extra
Items located in Pembroke for more pictures please email me at [email protected] for quickest reply
Ready for M-CHASSIS fun. With Protoform SoCal Panel Wagons 225mm.
Asking 400$ for the lot. Shipping costs extra
Items located in Pembroke for more pictures please email me at [email protected] for quickest reply
Ready for M-CHASSIS fun. With Protoform SoCal Panel Wagons 225mm.
01-19-2019, 05:19 AM
SOLD - Mylaps 2-Wire Transponder
>> SOLD <<
Selling my 2-wire Mylaps transponder with two plastic carriers. Mint condition and works perfect.
Selling my 2-wire Mylaps transponder with two plastic carriers. Mint condition and works perfect.
Last edited by SteveM; 01-19-2019 at 07:49 AM. Reason: >>SOLD<<
01-19-2019, 05:41 AM
2 x Tamiya HAHN Racing Trucks with Bearings!
Two sealed kits with complete Avid Bearing kits including steering bearings.
$210 each picked up - Burlington, Ontario. Can ship if needed.
01-20-2019, 08:17 AM
01-20-2019, 04:33 PM
LOWER PRICE! Mamba X + 2850kv 4 pole motor combo
Sold
Last edited by monkeyracing; 02-13-2019 at 12:42 PM.
01-20-2019, 04:42 PM
LOWERED PRICE! Goat 3s Crawler Combo
Novak Goat 3S Brushless Crawler System with Ballistic 21.5T Crawler Motor. Very little use. Very good low speed control, with torque to pull you out of any hole. Very nice setup.
$100 + shipping.
.
___
$100 + shipping.
.
___
Last edited by monkeyracing; 01-28-2019 at 01:29 PM.
01-21-2019, 09:10 AM
a800xah top deck and alloy chassis
SOLD!
Last edited by martiniracing; 02-19-2019 at 09:33 AM.
01-21-2019, 04:33 PM
30 amp charger
looking for a 30amp + charger for 2 cell Lipo
01-21-2019, 05:49 PM
Tech Fanatic
01-21-2019, 07:47 PM
Looking for a hauler bag. Prefer the proline or protek. Let me know what you have. calgary area
01-23-2019, 01:54 PM
Tech Adept
iTrader: (3)
Touring Car Items For Sale
Consolidated remaining items with new ones in post 11662.
Last edited by GoliathOpponent; 03-30-2019 at 05:33 PM. Reason: Consolidated remaing items into new post
01-24-2019, 09:16 AM
Tech Addict
I am out of touring car (maybe out of pan car as well) and am selling the following items:
$140 Hudy Touring Car Setup System (109305)
+ Complete with original box and HW (including wheel nuts).
+ Sells new for $200 Cdn.
$100 New/Unused CRC "Pinion Tree of Gold"
+ 20 to 47 tooth 64 pitch pinions with caddy.
+ Sells new for $140 Cdn.
$80 New Futaba BLS551 Brushless Low-profile Digital Servo
+ https://servodatabase.com/servo/futaba/bls551
+ 128 oz-in at 6V, 0.10 sec / 0* at 6V, 44g (1.55 oz).
+ Metal gears, dual bearings.
+ Sells new for $100 US.
$50 Viper VTX10 Black Edition
+ Only used with stock motors.
+ Includes PROGauge.
$40 Futaba R204GF-E 4-channel Receiver
+ https://www.rc.futaba.co.jp/english/.../r204gfe_e.pdf
+ S-FHSS / FHSS (used with 4PL), internal antenna.
+ Dimensions and specs in photo below.
+ Lightly used, sells new for $45+ US.
$40 New XRAY 303358 Aluminum Rear Upright
+ Sells new for $60 US.
$30 New XRAY 308307-0 T4 Aluminum Shock Absorber Set
+ Two in package, sells new for $43 US.
$40 Reedy WolfPack 5500
+ Hardly used, case is nice and square (properly maintained), includes LiPo safe.
$10 10.5 and 17.5 Reedy Sonic Motors
+ Careful to not overtemp.
$10 for LRP Fan and Heatsink
$5 for each of two Exotek Heatsinks
$10 Unused Proline and XRAY 24mm Wheels with HPI Green (Medium) Inserts
Will consider offers. Prefer local cash sales (located in Calgary Varsity NW). Can bring items to ATS on Saturday if there is sufficient interest.
$140 Hudy Touring Car Setup System (109305)
+ Complete with original box and HW (including wheel nuts).
+ Sells new for $200 Cdn.
$100 New/Unused CRC "Pinion Tree of Gold"
+ 20 to 47 tooth 64 pitch pinions with caddy.
+ Sells new for $140 Cdn.
$80 New Futaba BLS551 Brushless Low-profile Digital Servo
+ https://servodatabase.com/servo/futaba/bls551
+ 128 oz-in at 6V, 0.10 sec / 0* at 6V, 44g (1.55 oz).
+ Metal gears, dual bearings.
+ Sells new for $100 US.
$50 Viper VTX10 Black Edition
+ Only used with stock motors.
+ Includes PROGauge.
$40 Futaba R204GF-E 4-channel Receiver
+ https://www.rc.futaba.co.jp/english/.../r204gfe_e.pdf
+ S-FHSS / FHSS (used with 4PL), internal antenna.
+ Dimensions and specs in photo below.
+ Lightly used, sells new for $45+ US.
$40 New XRAY 303358 Aluminum Rear Upright
+ Sells new for $60 US.
$30 New XRAY 308307-0 T4 Aluminum Shock Absorber Set
+ Two in package, sells new for $43 US.
$40 Reedy WolfPack 5500
+ Hardly used, case is nice and square (properly maintained), includes LiPo safe.
$10 10.5 and 17.5 Reedy Sonic Motors
+ Careful to not overtemp.
$10 for LRP Fan and Heatsink
$5 for each of two Exotek Heatsinks
$10 Unused Proline and XRAY 24mm Wheels with HPI Green (Medium) Inserts
Will consider offers. Prefer local cash sales (located in Calgary Varsity NW). Can bring items to ATS on Saturday if there is sufficient interest.
01-25-2019, 01:17 PM
Tech Addict
iTrader: (40)
FS: Brand new Maclan 6.5 motor
SOLD
Last edited by joech; 01-28-2019 at 07:00 AM.
01-28-2019, 10:33 AM
Help guys. I'm still in need of a yokomo BD7 2016 chassis.