78LikesBuy / Sell
03-12-2010, 08:49 AM
#4591
Tech Master
iTrader: (3)
Couple things to go.
Orion 10.5 Vortex - $30 shipped
Kyosho RB5 with tons of spares, Tony's screw kit, big (new&used) tire lot - $200
48P Pinion gears - 14 through 29, 2x24, all are new or like new - Sold.
Core-RC Lipo, 2 cell, 7.4v 3250mAh, perfect shape, very nice battery. $45.
Orion 10.5 Vortex - $30 shipped
Kyosho RB5 with tons of spares, Tony's screw kit, big (new&used) tire lot - $200
48P Pinion gears - 14 through 29, 2x24, all are new or like new - Sold.
Core-RC Lipo, 2 cell, 7.4v 3250mAh, perfect shape, very nice battery. $45.
Last edited by Semple; 03-12-2010 at 10:37 AM.
03-12-2010, 11:01 PM
#4592
NIB MO5 PRO
Its been built but never ran. Painted the body pearl white with gold wheel wells. 100% new.!
not to sure what these go for on the market so just shoot me an offer. I also got a blue alum fan bracket thats ment for the m05. its in the box aswell
Its been built but never ran. Painted the body pearl white with gold wheel wells. 100% new.!
not to sure what these go for on the market so just shoot me an offer. I also got a blue alum fan bracket thats ment for the m05. its in the box aswell
trades....
obviously a tekin
1/8th motor over a 3000kv rating
1/8th motor heat sink.
personal transponders are always nice.
not to sure what these go for on the market so just shoot me an offer. I also got a blue alum fan bracket thats ment for the m05. its in the box aswell
Its been built but never ran. Painted the body pearl white with gold wheel wells. 100% new.!
not to sure what these go for on the market so just shoot me an offer. I also got a blue alum fan bracket thats ment for the m05. its in the box aswell
trades....
obviously a tekin
1/8th motor over a 3000kv rating
1/8th motor heat sink.
personal transponders are always nice.
03-13-2010, 08:55 PM
#4593
Tech Addict
wtb
Any got a sensored esc for sale?
03-13-2010, 10:34 PM
#4594
Associated WOrld GT f/s
I'm selling my Associated RC10 R5 World GT car.
bought new at the start of this indoor season, and have only raced it at 3 indoor events.
will come with tires, a body and a servo. Box and manual too.
$220 + any shipping costs.
Stu
bought new at the start of this indoor season, and have only raced it at 3 indoor events.
will come with tires, a body and a servo. Box and manual too.
$220 + any shipping costs.
Stu
03-14-2010, 02:54 PM
#4595
After watching the show horders I decided to thin out my Gen-X spares.
First Up: Gen-X Spare Chassis, Bottom Pod Plates, and Left Micro Bulkheads. $20.00 obo.
Second Up: 3x Micro VCS Pan car shocks. Two built, one still in package. $5.00 each obo.
Everything for $30.00 + shipping
First Up: Gen-X Spare Chassis, Bottom Pod Plates, and Left Micro Bulkheads. $20.00 obo.
Second Up: 3x Micro VCS Pan car shocks. Two built, one still in package. $5.00 each obo.
Everything for $30.00 + shipping
Last edited by Capt'N_Slow; 03-19-2010 at 01:25 PM.
03-14-2010, 03:05 PM
#4596
Tech Initiate
Wanted-AR7000 receiver for Heli
location-calgary
03-14-2010, 03:30 PM
#4597
M18 Pro
Selling my Xray M18 Pro. Has been run twice on a carpet track and around the house.
SOLD!
Comes With:
Servo
1500mah 2s Lipo Battery
Castle Creations 6800KV
Only requires a reciever to run.
SOLD!
SOLD!
Comes With:
Servo
1500mah 2s Lipo Battery
Castle Creations 6800KV
Only requires a reciever to run.
SOLD!
Last edited by Capt'N_Slow; 03-17-2010 at 08:07 AM.
03-14-2010, 03:55 PM
#4598
I've switched to HotBodies, so I'm offloading my Team Associated gear. No trades please. (prices don't include shipping). Thanks
RC8T roller *Sold*
Spare parts, bins included. There's almost enough parts here to build another RC8T, plus a few other odds and ends (clutch shoes, flywheels, bearings, etc). $130
New in bag RC8T factory team chassis *Sold*
New in bag RC8T stock body $25
Team Associated Driver Richard Saxton "How To" Video. Two disc set that explains how to build and maintain the RC8T, as well as advice on engine tuning & track racing. Very helpful information. $25
RC8T roller *Sold*
Spare parts, bins included. There's almost enough parts here to build another RC8T, plus a few other odds and ends (clutch shoes, flywheels, bearings, etc). $130
New in bag RC8T factory team chassis *Sold*
New in bag RC8T stock body $25
Team Associated Driver Richard Saxton "How To" Video. Two disc set that explains how to build and maintain the RC8T, as well as advice on engine tuning & track racing. Very helpful information. $25
03-14-2010, 04:50 PM
#4599
Tech Master
iTrader: (3)
Couple things to go.
Orion 10.5 Vortex - $30 shipped
Kyosho RB5 with tons of spares, Tony's screw kit, big (new&used) tire lot - $200
48P Pinion gears - 14 through 29, 2x24, all are new or like new - Sold.
Core-RC Lipo, 2 cell, 7.4v 3250mAh, perfect shape, very nice battery. $45.
Orion 10.5 Vortex - $30 shipped
Kyosho RB5 with tons of spares, Tony's screw kit, big (new&used) tire lot - $200
48P Pinion gears - 14 through 29, 2x24, all are new or like new - Sold.
Core-RC Lipo, 2 cell, 7.4v 3250mAh, perfect shape, very nice battery. $45.
03-15-2010, 08:13 AM
#4600
Tech Rookie
E-revo with spektrum 2.4ghz
This is a brushed e-revo
-Evx2
-Titan 775 motor used 2 times
-All deans plugs
-17mm wheels adaptors
-60wt oil all a 4 shocks
-blue spring rear silver front
-geared 17t/65t
-4x Hpi Nubiz with orange painted wheels (95% left)
-4x Talon tires (90% left)
-2.4ghz Spektrum dx3 with receiver
also come with stock transmitter and receiver
Really clean and is fast!
375$ with the 2.4ghz system
or
300$ with stock TX/RX
add
40$ for 2 turnigy 5000mah 20c lipos
250$ as a roller with stock talons no esc/motor
Always cleaned after each ride, Iam selling this because I need money for school.
Could Trade with stock TX/RX for a mini 1/16 erevo or slash except you add some shipping fees and you ship first
Iam in Quebec, Canada
[email protected]
-Evx2
-Titan 775 motor used 2 times
-All deans plugs
-17mm wheels adaptors
-60wt oil all a 4 shocks
-blue spring rear silver front
-geared 17t/65t
-4x Hpi Nubiz with orange painted wheels (95% left)
-4x Talon tires (90% left)
-2.4ghz Spektrum dx3 with receiver
also come with stock transmitter and receiver
Really clean and is fast!
375$ with the 2.4ghz system
or
300$ with stock TX/RX
add
40$ for 2 turnigy 5000mah 20c lipos
250$ as a roller with stock talons no esc/motor
Always cleaned after each ride, Iam selling this because I need money for school.
Could Trade with stock TX/RX for a mini 1/16 erevo or slash except you add some shipping fees and you ship first
Iam in Quebec, Canada
[email protected]
03-15-2010, 07:00 PM
#4602
Few things for sale...hope its ok to post em here
first up is a Tamiya MO-3 pro, Blue chrome chassis
super mini cva shocks blue springs front, yellow rears
3racing alum steering knuckles
3racing alum motor heat sync
3racing alum servo mounts
Tamiya s-grip tires up front
3racing mini tires rear
spare set of pre mounted 3racing mini tires
Novak smart stop 2 cell lipo cut off
MO-5 style battery mounts
stock Tamiya esc with deans, power switch removed
Futaba 3003 steering servo
Abarth body, little beat up
Suzuki swift body, lots beat up
Tamiya ball diff...used but not installed
newer stock motor soldered directly to esc
not gonna be racing it over the summer and would like someone to drive it instead of it collecting dust
$150 OBO
next is a Parma 1/10 el camino body, trimmed and window masked with 1 coat of Pactra pearl white on it ( except bumpers & side skirts)
$15 or $50 and i finish painting it for you (you supply the rattle cans) 3 colour max
next are new Parma touring car rims, something like 8 million spokes
paid 17.99 a pair for these...$15 for all four
don't be afraid to make an offer....will trade all items for AE B44 roller
cash, email money transfer, local pick preferred but can deliver within
reason, will ship with payment first
Ryan 403-771-0808
first up is a Tamiya MO-3 pro, Blue chrome chassis
super mini cva shocks blue springs front, yellow rears
3racing alum steering knuckles
3racing alum motor heat sync
3racing alum servo mounts
Tamiya s-grip tires up front
3racing mini tires rear
spare set of pre mounted 3racing mini tires
Novak smart stop 2 cell lipo cut off
MO-5 style battery mounts
stock Tamiya esc with deans, power switch removed
Futaba 3003 steering servo
Abarth body, little beat up
Suzuki swift body, lots beat up
Tamiya ball diff...used but not installed
newer stock motor soldered directly to esc
not gonna be racing it over the summer and would like someone to drive it instead of it collecting dust
$150 OBO
next is a Parma 1/10 el camino body, trimmed and window masked with 1 coat of Pactra pearl white on it ( except bumpers & side skirts)
$15 or $50 and i finish painting it for you (you supply the rattle cans) 3 colour max
next are new Parma touring car rims, something like 8 million spokes
paid 17.99 a pair for these...$15 for all four
don't be afraid to make an offer....will trade all items for AE B44 roller
cash, email money transfer, local pick preferred but can deliver within
reason, will ship with payment first
Ryan 403-771-0808
03-15-2010, 11:17 PM
#4604
Brushless T4 For Sale
Selling my Associated Factory T4 for sale, it has a castle ESC and brand new Brushless 5700kv motor, comes with everything but the reciever and radio. Very fast and in great shape. Just don't race it enough to justify keeping it. Comes with a few extra parts, extra tires and original box. $200 firm
03-16-2010, 02:38 AM
#4605
3 Channel RTF RC EP J-3 Aerobatic Scaled Plane - 145 US$
You are buying a Brand New 3 Channel RTF RC EP J-3 Aerobatic Scaled Plane. This package is completed and ready to fly! The radio gear is pre-installed. You only need to put the wings on and it is ready to fly.
As this model is 3 Channel. The engine, rudder and elevator are fully controllable. It is capable of stunt flying and airshow tricks, including looping, cuban 8, roll ,etc suitable for experienced flyers as well as beginners.
Features:
Super strong gauge foam fuselage and wings.
Servos, receiver, speed controller are pre-installed.
Pre-install 370 motor.
Interchangeable frequency crystal.
Fine trim adjustment and servo reverse function on all channels.
Full set includes aircraft, radio controller, battery charger, 9.6v battery, owners manual.
Specification:
Length : 720mm
Wing span : 950mm
Flying Weight : 500g
Motor : 370A
Propeller : 7 X 4"
Battery : 9.6V AAA 600mAh
Radio : FM4-Channel proportional radio
Items included:
1. 3 Channel RTF RC EP J-3 Aerobatic Scaled Plane
2. Main Wing and Tail Wing
3. Micro-servo X 2
4. Electronic Speed Controller
5. Radio transmitter
6. Receiver
7. 9.6V 600mAh rechargeable battery
8. 220V or 110V wall charger
9. User Manual
You are buying a Brand New 3 Channel RTF RC EP J-3 Aerobatic Scaled Plane. This package is completed and ready to fly! The radio gear is pre-installed. You only need to put the wings on and it is ready to fly.
As this model is 3 Channel. The engine, rudder and elevator are fully controllable. It is capable of stunt flying and airshow tricks, including looping, cuban 8, roll ,etc suitable for experienced flyers as well as beginners.
Features:
Super strong gauge foam fuselage and wings.
Servos, receiver, speed controller are pre-installed.
Pre-install 370 motor.
Interchangeable frequency crystal.
Fine trim adjustment and servo reverse function on all channels.
Full set includes aircraft, radio controller, battery charger, 9.6v battery, owners manual.
Specification:
Length : 720mm
Wing span : 950mm
Flying Weight : 500g
Motor : 370A
Propeller : 7 X 4"
Battery : 9.6V AAA 600mAh
Radio : FM4-Channel proportional radio
Items included:
1. 3 Channel RTF RC EP J-3 Aerobatic Scaled Plane
2. Main Wing and Tail Wing
3. Micro-servo X 2
4. Electronic Speed Controller
5. Radio transmitter
6. Receiver
7. 9.6V 600mAh rechargeable battery
8. 220V or 110V wall charger
9. User Manual