Buy / Sell
#3991
Tech Adept
Savage X
Savage X For sale
Comes with an axiel .28 motor
- throttle servo
- rechargeable reciever battery
- second transmission
-full set of rpm arms
-2 sets of 40 series tires mounted on wabash rims.
-a set of 17mm hex adapters and the original 17 mm hex adapters
-custom chassic rails that lower the engine to make the truck easyer to drive.
All that is needed to make the truck driveable is a radio a steering servo and a 7.4 volt stick pack for the roto start.
asking 300.00 for the lot
Pm or email for Questions [email protected].
Comes with an axiel .28 motor
- throttle servo
- rechargeable reciever battery
- second transmission
-full set of rpm arms
-2 sets of 40 series tires mounted on wabash rims.
-a set of 17mm hex adapters and the original 17 mm hex adapters
-custom chassic rails that lower the engine to make the truck easyer to drive.
All that is needed to make the truck driveable is a radio a steering servo and a 7.4 volt stick pack for the roto start.
asking 300.00 for the lot
Pm or email for Questions [email protected].
#3992
Tech Master
iTrader: (1)
FS: T2 008EU
Selling my rubber car as a roller, so this is the chassis plus the stuff that comes with the kit (box, manual, some not used plastic parts and shims...). Also includes the steel lipo tray that I used with this chassis, which brings it up to legal weight when you add some sticky lead.
$300 plus shipping
I can include some extra stuff for a good price if desired (like springs and plastic parts).
Adam Glatt
$300 plus shipping
I can include some extra stuff for a good price if desired (like springs and plastic parts).
Adam Glatt
#3993
Berg Crawler chassis for sale
I have an En-route berg chassis for sale in great condition. $300-
Complete stock kit (used)
Axles clocked
Rear steer platform and links
Weighted aluminum rims in Losi Rock claw tires
Pm for more details and pictures!
Complete stock kit (used)
Axles clocked
Rear steer platform and links
Weighted aluminum rims in Losi Rock claw tires
Pm for more details and pictures!
#3994
Tech Master
iTrader: (1)
FS: Xray T2 parts
$3 each----
1pcs f arm h
1pcs f arm xh
1pcs r arm h
1pcs knuckle h
1pcs rear hub 1r h
3pcs rear hub 0 m
1pcs c-hub 6l h
1pcs c-hub 4l m
2pcs c-hub 4r m
2pcs c-hub 4l h
2pcs c-hub 4r h
1pcs plastic spool outdrive pair (new)
various captured ends (11pcs) (new)
$6 each----
1pcs rear belt 305444 (new)
1pcs rear belt 305442 (new)
1pair wide hexes (used)
1pcs 50mm dogbone (new)
various used spool parts (incl. dust cover, 2 rings, screw, 2 bearings, thrust washers, clip)
1pair C3.2 springs
1pair C3.0 springs
$15 each----
1pcs xray differential thrust bearing (new)
1pcs rear sway bar kit (used)
Shipping extra, though if you buy enough parts I'll cover it.
Adam Glatt
1pcs f arm h
1pcs f arm xh
1pcs r arm h
1pcs knuckle h
1pcs rear hub 1r h
3pcs rear hub 0 m
1pcs c-hub 6l h
1pcs c-hub 4l m
2pcs c-hub 4r m
2pcs c-hub 4l h
2pcs c-hub 4r h
1pcs plastic spool outdrive pair (new)
various captured ends (11pcs) (new)
$6 each----
1pcs rear belt 305444 (new)
1pcs rear belt 305442 (new)
1pair wide hexes (used)
1pcs 50mm dogbone (new)
various used spool parts (incl. dust cover, 2 rings, screw, 2 bearings, thrust washers, clip)
1pair C3.2 springs
1pair C3.0 springs
$15 each----
1pcs xray differential thrust bearing (new)
1pcs rear sway bar kit (used)
Shipping extra, though if you buy enough parts I'll cover it.
Adam Glatt
#3995
Tech Initiate
WTB - BLADE CX2 OR MCX
I am looking for a Blade CX2 or MCX RTF in good condition in the Calgary area. Please let me know what you have and the price.
Thanks Brian
Thanks Brian
#3998
Tech Elite
iTrader: (4)
Planning on converting my buggy to electric sooooooo...........
For Sale: My .21 GRP with a spare rod ( brand new ).
Has about 5 gallons on it. Lots of compression left ( pinch???? )
Ran it a partial season last year, plus the first half of this season.
( I don't put many hours on my engine's)
Selling an OS 2050 pipe with it. Picked it up this past February.
About 2 gallons through it.
This combo makes good power but is difficult to tune.
That's why the blowout price of $250.00 for the package!!
Will post pictures as soon as possible.
Paypal accepted.
Price does not include shipping out of province. But I will include
shipping within Alberta.
For Sale: My .21 GRP with a spare rod ( brand new ).
Has about 5 gallons on it. Lots of compression left ( pinch???? )
Ran it a partial season last year, plus the first half of this season.
( I don't put many hours on my engine's)
Selling an OS 2050 pipe with it. Picked it up this past February.
About 2 gallons through it.
This combo makes good power but is difficult to tune.
That's why the blowout price of $250.00 for the package!!
Will post pictures as soon as possible.
Paypal accepted.
Price does not include shipping out of province. But I will include
shipping within Alberta.
#3999
Tech Elite
iTrader: (4)
Planning on converting my buggy to electric sooooooo...........
For Sale: My .21 GRP with a spare rod ( brand new ).
Has about 5 gallons on it. Lots of compression left ( pinch???? )
Ran it a partial season last year, plus the first half of this season.
( I don't put many hours on my engine's)
Selling an OS 2050 pipe with it. Picked it up this past February.
About 2 gallons through it.
This combo makes good power but is difficult to tune.
That's why the blowout price of $250.00 for the package!!
Will post pictures as soon as possible.
Paypal accepted.
Price does not include shipping out of province. But I will include
shipping within Alberta.
For Sale: My .21 GRP with a spare rod ( brand new ).
Has about 5 gallons on it. Lots of compression left ( pinch???? )
Ran it a partial season last year, plus the first half of this season.
( I don't put many hours on my engine's)
Selling an OS 2050 pipe with it. Picked it up this past February.
About 2 gallons through it.
This combo makes good power but is difficult to tune.
That's why the blowout price of $250.00 for the package!!
Will post pictures as soon as possible.
Paypal accepted.
Price does not include shipping out of province. But I will include
shipping within Alberta.
SOLD!!!!! Payment pending.
#4000
Tech Initiate
iTrader: (3)
GFX 35 Turbo with Lipo Upgrade For Sale
Hey guys,
I have a Competition Electronics GFX 35 with lipo upgrade with the software version 3.00 for sale in good condition. Asking $120.00 shipped! If you are interested please email me at [email protected] Pic is available upon request!
Thanks,
Derek Siciliano
I accept paypal and I am also paypal verified! If you buy today, I will ship today.
I have a Competition Electronics GFX 35 with lipo upgrade with the software version 3.00 for sale in good condition. Asking $120.00 shipped! If you are interested please email me at [email protected] Pic is available upon request!
Thanks,
Derek Siciliano
I accept paypal and I am also paypal verified! If you buy today, I will ship today.
#4005
Ofna chrome top starter box 12V motor
$65 shipped with charger. $80 shipped with gell cell (heavy!!!!)