79LikesBuy / Sell
12-27-2007, 06:45 PM
#2746
revo 3.3 for sale or trade
here it is i have a revo for sale or trade go ahade and offer up here is some pics and a bit about it let me know what you all think ..... http://www.rcuniverse.com/market/item.cfm?itemID=352654
this might help someone for winter nats
this might help someone for winter nats
12-28-2007, 08:52 PM
#2747
Tech Master
iTrader: (47)
Selling out lots of my stuff. Please PM me.
http://www.calgaryrc.com/forum/viewtopic.php?t=4371
http://www.calgaryrc.com/forum/viewtopic.php?t=4376
http://www.calgaryrc.com/forum/viewtopic.php?t=4374
http://www.calgaryrc.com/forum/viewtopic.php?t=4369
http://www.calgaryrc.com/forum/viewtopic.php?t=4377
http://www.calgaryrc.com/forum/viewtopic.php?t=4373
http://www.calgaryrc.com/forum/viewtopic.php?t=4371
http://www.calgaryrc.com/forum/viewtopic.php?t=4376
http://www.calgaryrc.com/forum/viewtopic.php?t=4374
http://www.calgaryrc.com/forum/viewtopic.php?t=4369
http://www.calgaryrc.com/forum/viewtopic.php?t=4377
http://www.calgaryrc.com/forum/viewtopic.php?t=4373
12-29-2007, 11:16 AM
#2748
TC5 and batteries for sale
Hey All,
I have the following for sale:
Team Associated TC5 which has only 3 "club" race nights on it. It has so far been my favourite TC in comparison to other platforms and is very agressive. It comes with the following:
- Acer Racing ceramic bearing set ($90 value). I use these bearings in all my cars both on and off-road and they last forever.
- Ceramic diff balls.
- Aluminum differential sets front and rear ($100 value).
- Team Tamale 6 degree aluminum C-hubs ($60 value). Brand new.
- 4 sets carbide diff balls with all new parts to assemble two differentials with plastic outdrives.
- Spring kit.
- 64P pinions in large sizes ideal for brushed/brushless stock which requires high rollouts (38T-48T)
- A spare part for almost every piece on the car (arms, suspension holders, belts, rear hubs (various degrees of toe-in), C-hubs (different degrees), steering blocks, shock components, etc.)
The car will come race ready minus electronics with a set-up that has won me our last two club races in 19T. Keep in mind that to buy all of this stuff from another "high-end" TC maufacturer you will be looking to spend at least $1000 (trust me I know!)
I am asking $450 firm shipping not included.
Secondly I have some battery packs for sale. They have been used 3 "club" race nights and are charged at 6 amps and discharged at 30A down to 0.9V. They are 6 cell Team Orion IB4200s and are intended for stock or 19T racing due to their higher voltage in exchange for a little loss in run time. The numbers are as follows:
454 sec and 1.240V
447 sec and 1.242V
427 sec and 1.247V
427 sec and 1.245V
The packs are unassembled but come with heat shrink over the labels.
$30 per pack or $110 for all 4.
Lastly, I have a couple 4 cell packs for sale. They have 2 "club" race nights on them. They are unassembled with heatshrink on the labels:
Peak Racing IB4200 439 sec and 1.234V
SMC IB4200 450 sec and 1.247V
$25 per pack or $45 for both.
Oh yeah, and for all you Winternats junkies I have a Xray XB8EC for sale that I raced last year. It is a very durable buggy and I had no breakages in 4 CORCS races with this buggy. It has tons of spare parts and I will also throw in an almost complete XB8TQ kit with it. I will be asking around $350 but will have more details once I get it all together in a couple of weeks.
Thanks everyone,
Kane
PS- I accept paypal and happy new year!!!
I have the following for sale:
Team Associated TC5 which has only 3 "club" race nights on it. It has so far been my favourite TC in comparison to other platforms and is very agressive. It comes with the following:
- Acer Racing ceramic bearing set ($90 value). I use these bearings in all my cars both on and off-road and they last forever.
- Ceramic diff balls.
- Aluminum differential sets front and rear ($100 value).
- Team Tamale 6 degree aluminum C-hubs ($60 value). Brand new.
- 4 sets carbide diff balls with all new parts to assemble two differentials with plastic outdrives.
- Spring kit.
- 64P pinions in large sizes ideal for brushed/brushless stock which requires high rollouts (38T-48T)
- A spare part for almost every piece on the car (arms, suspension holders, belts, rear hubs (various degrees of toe-in), C-hubs (different degrees), steering blocks, shock components, etc.)
The car will come race ready minus electronics with a set-up that has won me our last two club races in 19T. Keep in mind that to buy all of this stuff from another "high-end" TC maufacturer you will be looking to spend at least $1000 (trust me I know!)
I am asking $450 firm shipping not included.
Secondly I have some battery packs for sale. They have been used 3 "club" race nights and are charged at 6 amps and discharged at 30A down to 0.9V. They are 6 cell Team Orion IB4200s and are intended for stock or 19T racing due to their higher voltage in exchange for a little loss in run time. The numbers are as follows:
454 sec and 1.240V
447 sec and 1.242V
427 sec and 1.247V
427 sec and 1.245V
The packs are unassembled but come with heat shrink over the labels.
$30 per pack or $110 for all 4.
Lastly, I have a couple 4 cell packs for sale. They have 2 "club" race nights on them. They are unassembled with heatshrink on the labels:
Peak Racing IB4200 439 sec and 1.234V
SMC IB4200 450 sec and 1.247V
$25 per pack or $45 for both.
Oh yeah, and for all you Winternats junkies I have a Xray XB8EC for sale that I raced last year. It is a very durable buggy and I had no breakages in 4 CORCS races with this buggy. It has tons of spare parts and I will also throw in an almost complete XB8TQ kit with it. I will be asking around $350 but will have more details once I get it all together in a couple of weeks.
Thanks everyone,
Kane
PS- I accept paypal and happy new year!!!
12-30-2007, 02:48 PM
#2749
Hey All,
I have the following for sale:
Team Associated TC5 which has only 3 "club" race nights on it. It has so far been my favourite TC in comparison to other platforms and is very agressive. It comes with the following:
- Acer Racing ceramic bearing set ($90 value). I use these bearings in all my cars both on and off-road and they last forever.
- Ceramic diff balls.
- Aluminum differential sets front and rear ($100 value).
- Team Tamale 6 degree aluminum C-hubs ($60 value). Brand new.
- 4 sets carbide diff balls with all new parts to assemble two differentials with plastic outdrives.
- Spring kit.
- 64P pinions in large sizes ideal for brushed/brushless stock which requires high rollouts (38T-48T)
- A spare part for almost every piece on the car (arms, suspension holders, belts, rear hubs (various degrees of toe-in), C-hubs (different degrees), steering blocks, shock components, etc.)
The car will come race ready minus electronics with a set-up that has won me our last two club races in 19T. Keep in mind that to buy all of this stuff from another "high-end" TC maufacturer you will be looking to spend at least $1000 (trust me I know!)
I am asking $450 firm shipping not included.
Secondly I have some battery packs for sale. They have been used 3 "club" race nights and are charged at 6 amps and discharged at 30A down to 0.9V. They are 6 cell Team Orion IB4200s and are intended for stock or 19T racing due to their higher voltage in exchange for a little loss in run time. The numbers are as follows:
454 sec and 1.240V
447 sec and 1.242V
427 sec and 1.247V
427 sec and 1.245V
The packs are unassembled but come with heat shrink over the labels.
$30 per pack or $110 for all 4.
Lastly, I have a couple 4 cell packs for sale. They have 2 "club" race nights on them. They are unassembled with heatshrink on the labels:
Peak Racing IB4200 439 sec and 1.234V
SMC IB4200 450 sec and 1.247V
$25 per pack or $45 for both.
Oh yeah, and for all you Winternats junkies I have a Xray XB8EC for sale that I raced last year. It is a very durable buggy and I had no breakages in 4 CORCS races with this buggy. It has tons of spare parts and I will also throw in an almost complete XB8TQ kit with it. I will be asking around $350 but will have more details once I get it all together in a couple of weeks.
Thanks everyone,
Kane
PS- I accept paypal and happy new year!!!
I have the following for sale:
Team Associated TC5 which has only 3 "club" race nights on it. It has so far been my favourite TC in comparison to other platforms and is very agressive. It comes with the following:
- Acer Racing ceramic bearing set ($90 value). I use these bearings in all my cars both on and off-road and they last forever.
- Ceramic diff balls.
- Aluminum differential sets front and rear ($100 value).
- Team Tamale 6 degree aluminum C-hubs ($60 value). Brand new.
- 4 sets carbide diff balls with all new parts to assemble two differentials with plastic outdrives.
- Spring kit.
- 64P pinions in large sizes ideal for brushed/brushless stock which requires high rollouts (38T-48T)
- A spare part for almost every piece on the car (arms, suspension holders, belts, rear hubs (various degrees of toe-in), C-hubs (different degrees), steering blocks, shock components, etc.)
The car will come race ready minus electronics with a set-up that has won me our last two club races in 19T. Keep in mind that to buy all of this stuff from another "high-end" TC maufacturer you will be looking to spend at least $1000 (trust me I know!)
I am asking $450 firm shipping not included.
Secondly I have some battery packs for sale. They have been used 3 "club" race nights and are charged at 6 amps and discharged at 30A down to 0.9V. They are 6 cell Team Orion IB4200s and are intended for stock or 19T racing due to their higher voltage in exchange for a little loss in run time. The numbers are as follows:
454 sec and 1.240V
447 sec and 1.242V
427 sec and 1.247V
427 sec and 1.245V
The packs are unassembled but come with heat shrink over the labels.
$30 per pack or $110 for all 4.
Lastly, I have a couple 4 cell packs for sale. They have 2 "club" race nights on them. They are unassembled with heatshrink on the labels:
Peak Racing IB4200 439 sec and 1.234V
SMC IB4200 450 sec and 1.247V
$25 per pack or $45 for both.
Oh yeah, and for all you Winternats junkies I have a Xray XB8EC for sale that I raced last year. It is a very durable buggy and I had no breakages in 4 CORCS races with this buggy. It has tons of spare parts and I will also throw in an almost complete XB8TQ kit with it. I will be asking around $350 but will have more details once I get it all together in a couple of weeks.
Thanks everyone,
Kane
PS- I accept paypal and happy new year!!!
$350 locally/$375 shipped for the TC5
$90 for all four 6 cell packs
$35 for both 4 cell packs
$425 for the TC5 and the four 6 cell packs.
PM if interested
12-30-2007, 06:27 PM
#2750
12-31-2007, 11:42 AM
#2751
Like New Tamiya TRF415MSX MRE - Foam setup
For sale: Like new Tamiya TRF415MSX MRE - Converted to foam with the 4mm chassis, longer front arms and 415MS R2 steering rack. Great car! Comes with SC430 body, spare arms, knuckles, hubs and front oneway. Radio gear, ESC/motor and other elec not included. Looking for 250.00 or best offer. Hoping to buy a new car for the summer season.
12-31-2007, 02:42 PM
#2752
I have a brand new Axe Mamba .21 buggy/truggy engine to sell. They sell for $260 at Amainhobbies.com
If you are looking for an excellent race engine this is it, tops out at 41500rpm with 2.9HP. It is a real screamer and early reports are it is pretty good on fuel and of course Rossi reliability! I am looking for $230 shipped to your door from Moose Jaw, Sask. Thanks for looking! Pics on request.
If you are looking for an excellent race engine this is it, tops out at 41500rpm with 2.9HP. It is a real screamer and early reports are it is pretty good on fuel and of course Rossi reliability! I am looking for $230 shipped to your door from Moose Jaw, Sask. Thanks for looking! Pics on request.
12-31-2007, 10:42 PM
#2753
WTB: Battery Discharger
Somthing like the Much More CTX-D2 Discharger/Personal Matcher or Team Wave Lightning Discharge Tray
No Trinity DPD's Please
Will pay cash for local or Paypal for items that have to be shipped.
Seller must have feed back and pictures (Unless local)
PM with Details or email photos to [email protected]
Somthing like the Much More CTX-D2 Discharger/Personal Matcher or Team Wave Lightning Discharge Tray
No Trinity DPD's Please
Will pay cash for local or Paypal for items that have to be shipped.
Seller must have feed back and pictures (Unless local)
PM with Details or email photos to [email protected]
01-01-2008, 05:03 PM
#2754
13.5 Brushless Motor / Tamiya M03L Kit / Touring Car Tires
Everything is brand new:
Speed Passion 13.5 brushless motor (equivalent to 27T brushed motor) $45
Tamiya M03L Mini Cooper Kit $75 (add $15 for a complete bearing set)
Tamiya Mini cooper wheel (Set of 4) $4.0
Tamiya carbon reinforced wheel for M chassis (pair) $4.5
Trinity brushes ($1.00 / pair)
Premount CS22 tires (Set of 4) $25
RP24 tires (set of 4) $15
CS27 tires (set of 4) $15
CS22 tires (set of 4) $15
RP nylon rims (set of 4) $4.5
Plus actual shipping cost (if required)
Speed Passion 13.5 brushless motor (equivalent to 27T brushed motor) $45
Tamiya M03L Mini Cooper Kit $75 (add $15 for a complete bearing set)
Tamiya Mini cooper wheel (Set of 4) $4.0
Tamiya carbon reinforced wheel for M chassis (pair) $4.5
Trinity brushes ($1.00 / pair)
Premount CS22 tires (Set of 4) $25
RP24 tires (set of 4) $15
CS27 tires (set of 4) $15
CS22 tires (set of 4) $15
RP nylon rims (set of 4) $4.5
Plus actual shipping cost (if required)
Car has only been used on carpet. I recently replaced all the bearings and both belts. Comes with battery strap, sway bar kit and a few spares. $275.00 + shipping
01-02-2008, 09:12 PM
#2756
WTB: OLD Kyosho stuff
Hi all,
I'm just trying to concentrate on some of the older Kyosho models for my collection this year ( although of course there's always room for Schumacher stuff too!)
SO, I am on the hunt for anything from the Tomahawk, Scorpion chassis range; kits, parts, hop ups, whatever. Also, anything Optima, particularly Mid stuff, again parts are fine if that's all you got.
can trade with cash !!
or stuff too.
Thanks
Stu
I'm just trying to concentrate on some of the older Kyosho models for my collection this year ( although of course there's always room for Schumacher stuff too!)
SO, I am on the hunt for anything from the Tomahawk, Scorpion chassis range; kits, parts, hop ups, whatever. Also, anything Optima, particularly Mid stuff, again parts are fine if that's all you got.
can trade with cash !!
or stuff too.Thanks
Stu
01-02-2008, 09:20 PM
#2757
Hey guys....looking for a high end esc....brushed.....Hara Twister 2, GTX, QC2, QC3....let me know what you have.
Thanks......Dwayne
Thanks......Dwayne
01-03-2008, 01:42 AM
#2759
01-05-2008, 02:11 AM
#2760
Integy Type I Pro Rock Crawler Chassis
I have for sale a brand new Integy Type I Pro Rock Crawler Chassis, the chassis was assembled for mock up but never used $100cdn OBO + shipping.
If you have any questions please e-mail me at [email protected]
http://i5.photobucket.com/albums/y17...e/9bfa790a.jpg
http://i5.photobucket.com/albums/y17...e/41064167.jpg
http://i5.photobucket.com/albums/y17...DSC03565-1.jpg
http://i5.photobucket.com/albums/y17...DSC03564-1.jpg
http://i5.photobucket.com/albums/y17...e/DSC03551.jpg
If you have any questions please e-mail me at [email protected]
http://i5.photobucket.com/albums/y17...e/9bfa790a.jpg
http://i5.photobucket.com/albums/y17...e/41064167.jpg
http://i5.photobucket.com/albums/y17...DSC03565-1.jpg
http://i5.photobucket.com/albums/y17...DSC03564-1.jpg
http://i5.photobucket.com/albums/y17...e/DSC03551.jpg