Tamiya Volkswagen Scirocco GT24 - FF03
#1
Thread Starter
Company Representative
Joined: Sep 2009
Posts: 1,017
The Tamiya Volkswagen Scirocco GT24 - FF03 Now at Banzai Hobby

The 2008 24 Hours Nurburgring had Volkswagen debut a contingent of new Scirocco GT24 race cars. They went on to earn an impressive 1-2 finish in their inaugural race. The car was later updated with a new 2.0-liter inline 4-cylinder turbocharged engine that was notable for being powered by Compressed Natural Gas (CNG), which reduced CO2 emissions by 80%. This machine again demonstrated its superb performance, capturing the AT (alternative powertrain) class titles in 2009, 2010, and 2011. The Tamiya R/C car model is produced in 1/10 scale and the featured chassis underneath is the FF-03 (Tamiya's 3rd generation Front-Wheel-Drive chassis). The RC model depicts the Scirocco GT24-CNG which raced in the 2011 24 Hours Nurburgring.
Specs and Features
1/10 scale R/C assembly kit.
VW Scirocco body is realistically reproduced with polycarbonate material.
Sticker and masking sticker sheets included.
Separately-molded side mirrors and rear wing parts included.
The front-motor FWD FF-03 chassis features Inboard Front Suspension, ball differential, and CVA oil dampers.
Independent double wishbone suspension
Medium-narrow 10-spoke Gun Metal wheels (offset 0) are included.
*** Please Note NO ESC Is Included with this Kit***
http://banzaihobby.com/index.php?mai...ducts_id=12486
Please Click on the link Above to find out More
Banzai Hobby Team

The 2008 24 Hours Nurburgring had Volkswagen debut a contingent of new Scirocco GT24 race cars. They went on to earn an impressive 1-2 finish in their inaugural race. The car was later updated with a new 2.0-liter inline 4-cylinder turbocharged engine that was notable for being powered by Compressed Natural Gas (CNG), which reduced CO2 emissions by 80%. This machine again demonstrated its superb performance, capturing the AT (alternative powertrain) class titles in 2009, 2010, and 2011. The Tamiya R/C car model is produced in 1/10 scale and the featured chassis underneath is the FF-03 (Tamiya's 3rd generation Front-Wheel-Drive chassis). The RC model depicts the Scirocco GT24-CNG which raced in the 2011 24 Hours Nurburgring.
Specs and Features
1/10 scale R/C assembly kit.
VW Scirocco body is realistically reproduced with polycarbonate material.
Sticker and masking sticker sheets included.
Separately-molded side mirrors and rear wing parts included.
The front-motor FWD FF-03 chassis features Inboard Front Suspension, ball differential, and CVA oil dampers.
Independent double wishbone suspension
Medium-narrow 10-spoke Gun Metal wheels (offset 0) are included.
*** Please Note NO ESC Is Included with this Kit***
http://banzaihobby.com/index.php?mai...ducts_id=12486
Please Click on the link Above to find out More

Banzai Hobby Team




