Yokomo MR-4TCSD & MR-4TCSDCGM chat
#436
Tech Champion
iTrader: (9)
Re: XXX
Originally posted by Yokomo Aust
Hey there Bradski
The only reason i didn't get that hacker speedie from you the first time is due to the limited space in these tub chassis yokes. I wish i could have fitted it in i would have prefered the Hacker set up.
I am not the luckiest of people you will ever meet.
Hey there Bradski
The only reason i didn't get that hacker speedie from you the first time is due to the limited space in these tub chassis yokes. I wish i could have fitted it in i would have prefered the Hacker set up.
I am not the luckiest of people you will ever meet.
If you would like to test fit give me a call on 0414 864 111 and you can come out to my place.
#437
*** FOR SALE!!! ***
YOKOMO MR-4TC SD BLACK + RAYSPEED (CHASSIS) CONVERSION KIT
- Includes the following;
Hot-Ups
- Yokomo Front/Rear alluminium input shafts
- Yokomo Alluminium Rear drive shafts
- Yokomo Alluminium Wheel hubs
- Yokomo low friction shock shafts
- Yokomo Carbon shaft
- Yokomo Optional Short Sway bars
- Yokomo Optional Long Sway bars
- Yokomo Spring Set
- Rayspeed Spring Set
- Rayspeed Spring Retainers
Spares
- 64pitch Spur gears
- 30-51 Pinion Gears 64 pitch
- Spare bearings
- Spare Screws
- Spare A arms
+ more
Bodies
- Protoform Mazda 6
- Protoform Dodge Stratus
- Ride Dodge Stratus
+ More (6)
Tires
15+ SETS of Sorex/Ellegi tires. New and used. Comes with Team Atlas Tire Carry Box.
Tools
- 1.5mm hex driver
- 2.0mm hex driver
- 2.5mm hex driver
- Yokomo Tool Box with spares
Still have all the original boxes. Very well looked after!
$450 + Shipping
Quick Sale! PM or call me on 0411 295 369 Phil
YOKOMO MR-4TC SD BLACK + RAYSPEED (CHASSIS) CONVERSION KIT
- Includes the following;
Hot-Ups
- Yokomo Front/Rear alluminium input shafts
- Yokomo Alluminium Rear drive shafts
- Yokomo Alluminium Wheel hubs
- Yokomo low friction shock shafts
- Yokomo Carbon shaft
- Yokomo Optional Short Sway bars
- Yokomo Optional Long Sway bars
- Yokomo Spring Set
- Rayspeed Spring Set
- Rayspeed Spring Retainers
Spares
- 64pitch Spur gears
- 30-51 Pinion Gears 64 pitch
- Spare bearings
- Spare Screws
- Spare A arms
+ more
Bodies
- Protoform Mazda 6
- Protoform Dodge Stratus
- Ride Dodge Stratus
+ More (6)
Tires
15+ SETS of Sorex/Ellegi tires. New and used. Comes with Team Atlas Tire Carry Box.
Tools
- 1.5mm hex driver
- 2.0mm hex driver
- 2.5mm hex driver
- Yokomo Tool Box with spares
Still have all the original boxes. Very well looked after!
$450 + Shipping
Quick Sale! PM or call me on 0411 295 369 Phil
#438
Guest
Re: Nice Pic
Originally posted by Bluey_74
Tornado,
Im assuming that they are Hudy spring steel drive shafts, and i know that they're rayspeed Drop down spring retainers. But what springs and what diff out drives are they?
BUT DOES IT WORK?!
Tornado,
Im assuming that they are Hudy spring steel drive shafts, and i know that they're rayspeed Drop down spring retainers. But what springs and what diff out drives are they?
BUT DOES IT WORK?!
Bryan
#439
Guys, Check the "FOR SALE" thread. Might find yourself a bargian!
Sadly i must part....
Sadly i must part....
#440
Just in time - new SD
MRTC-SDW
SD worldwide game replica kit
selling with limitation 555 of worldwide game special
specification:
- The center of gravity aluminum it starts shaving low, the body, floating motor mount (center shaft 4.5 millimeters, upper deck 2? O down)
- Front short span lower suspension arm, aluminum suspension mount,
- Black carbon graphite make 2. 5? O thick main chassis upper deck,shock tower, plate and rear body mount plate (2 kinds), bumpersupport, stubby plate
- Aluminum make universal drive shaft (both bone and axle aluminum)
- The aluminum make rod ended ball (stopper it is attached)
- Carbon graphite make hollow shaft
And so on in addition to the private part the below-mentioned optionpart standard equipment
Titanium screw set, super precision bearing (drive section), titaniummake rod ended ball and aluminum make input shaft, aluminum make rear suspension mount (3 times), front stabilizer (ray speed)(upper type), HD rear suspension arm, bumpstop O ring, as for other specifications SD It becomes identical with SSG and BLACK.
SD worldwide game replica kit
selling with limitation 555 of worldwide game special
specification:
- The center of gravity aluminum it starts shaving low, the body, floating motor mount (center shaft 4.5 millimeters, upper deck 2? O down)
- Front short span lower suspension arm, aluminum suspension mount,
- Black carbon graphite make 2. 5? O thick main chassis upper deck,shock tower, plate and rear body mount plate (2 kinds), bumpersupport, stubby plate
- Aluminum make universal drive shaft (both bone and axle aluminum)
- The aluminum make rod ended ball (stopper it is attached)
- Carbon graphite make hollow shaft
And so on in addition to the private part the below-mentioned optionpart standard equipment
Titanium screw set, super precision bearing (drive section), titaniummake rod ended ball and aluminum make input shaft, aluminum make rear suspension mount (3 times), front stabilizer (ray speed)(upper type), HD rear suspension arm, bumpstop O ring, as for other specifications SD It becomes identical with SSG and BLACK.
#441
Re: Just in time - new SD
Originally posted by danjoy25
MRTC-SDW
SD worldwide game replica kit
selling with limitation 555 of worldwide game special
specification:
- The center of gravity aluminum it starts shaving low, the body, floating motor mount (center shaft 4.5 millimeters, upper deck 2? O down)
- Front short span lower suspension arm, aluminum suspension mount,
- Black carbon graphite make 2. 5? O thick main chassis upper deck,shock tower, plate and rear body mount plate (2 kinds), bumpersupport, stubby plate
- Aluminum make universal drive shaft (both bone and axle aluminum)
- The aluminum make rod ended ball (stopper it is attached)
- Carbon graphite make hollow shaft
And so on in addition to the private part the below-mentioned optionpart standard equipment
Titanium screw set, super precision bearing (drive section), titaniummake rod ended ball and aluminum make input shaft, aluminum make rear suspension mount (3 times), front stabilizer (ray speed)(upper type), HD rear suspension arm, bumpstop O ring, as for other specifications SD It becomes identical with SSG and BLACK.
MRTC-SDW
SD worldwide game replica kit
selling with limitation 555 of worldwide game special
specification:
- The center of gravity aluminum it starts shaving low, the body, floating motor mount (center shaft 4.5 millimeters, upper deck 2? O down)
- Front short span lower suspension arm, aluminum suspension mount,
- Black carbon graphite make 2. 5? O thick main chassis upper deck,shock tower, plate and rear body mount plate (2 kinds), bumpersupport, stubby plate
- Aluminum make universal drive shaft (both bone and axle aluminum)
- The aluminum make rod ended ball (stopper it is attached)
- Carbon graphite make hollow shaft
And so on in addition to the private part the below-mentioned optionpart standard equipment
Titanium screw set, super precision bearing (drive section), titaniummake rod ended ball and aluminum make input shaft, aluminum make rear suspension mount (3 times), front stabilizer (ray speed)(upper type), HD rear suspension arm, bumpstop O ring, as for other specifications SD It becomes identical with SSG and BLACK.
#442
Yokomo SD Looks Good!!! Just wondering the diff case? were is it?how come no cover?! did they copy the barracuda or the sexray????
#443
Originally posted by Lowner_V1S
Yokomo SD Looks Good!!! Just wondering the diff case? were is it?how come no cover?! did they copy the barracuda or the sexray????
Yokomo SD Looks Good!!! Just wondering the diff case? were is it?how come no cover?! did they copy the barracuda or the sexray????
#444
ohhh Well
Looks like i am out for the rest of the year. I will take a break. Save some money and come back next year. I need to pay for my speedo repair or replacement, i need at least 4 new sets of batteries and i have to consider to buy the latest car or spend a bit more on my CGM (ceramic bearings, new battery post and a few other bits).
Lou: I will get my table and chair off you at the next meeting.
Brian: i will pick up the money for the motor at the next meeting.
Anyway i will probably see you all at the next meet at the Creek.
See you guys
Lou: I will get my table and chair off you at the next meeting.
Brian: i will pick up the money for the motor at the next meeting.
Anyway i will probably see you all at the next meet at the Creek.
See you guys
#445
hey colin ...
i don't think u need a new chassis or even cerramic bearings ..
concentrate on ur driving b4 gettin all the fast bits
it's not fun when all u do is spend cash an have no time 4 racing !!
I'm sure u can get ur old batts fixed up ...
anyway c u at the track
i don't think u need a new chassis or even cerramic bearings ..
concentrate on ur driving b4 gettin all the fast bits
it's not fun when all u do is spend cash an have no time 4 racing !!
I'm sure u can get ur old batts fixed up ...
anyway c u at the track
#446
Santa should have one in my name[URL=http://www.rctech.net/forum/attachment.php?s=&postid=1201822]
#447
Tech Master
iTrader: (1)
Re: ohhh Well
Originally posted by Yokomo Aust
Looks like i am out for the rest of the year. I will take a break. Save some money and come back next year. I need to pay for my speedo repair or replacement, i need at least 4 new sets of batteries and i have to consider to buy the latest car or spend a bit more on my CGM (ceramic bearings, new battery post and a few other bits).
Lou: I will get my table and chair off you at the next meeting.
Brian: i will pick up the money for the motor at the next meeting.
Anyway i will probably see you all at the next meet at the Creek.
See you guys
Looks like i am out for the rest of the year. I will take a break. Save some money and come back next year. I need to pay for my speedo repair or replacement, i need at least 4 new sets of batteries and i have to consider to buy the latest car or spend a bit more on my CGM (ceramic bearings, new battery post and a few other bits).
Lou: I will get my table and chair off you at the next meeting.
Brian: i will pick up the money for the motor at the next meeting.
Anyway i will probably see you all at the next meet at the Creek.
See you guys
#449
hey guys
i notice that the yokomo drifter kits are very similar to the CGM kits! do they perfrom the same?
what are the major differences?
Thanks
i notice that the yokomo drifter kits are very similar to the CGM kits! do they perfrom the same?
what are the major differences?
Thanks
#450
Originally posted by TRAJ
hey guys
i notice that the yokomo drifter kits are very similar to the CGM kits! do they perfrom the same?
what are the major differences?
Thanks
hey guys
i notice that the yokomo drifter kits are very similar to the CGM kits! do they perfrom the same?
what are the major differences?
Thanks