M05 Pro - Mini tyre package - Mini Parts
#1
M05 Pro - Mini tyre package - Mini Parts
Havent got enough time (or space) to race my M05 Pro so it is time to sell.
This has been blinged to the max and includes the following hop ups (in addition to the standard Pro kit.
* 13T Hobbywing brushless system
* Alloy motor mount
* Tamiya TRF Mini shocks
* Alloy/Carbon Fibre battery brace
* Alloy 2.5 degree rear toe blocks
* Tamiya alloy front shock tower (to provide front shock angle adjustment)
* Tamiya CV drive shafts
* Graphite body post stiffener
* Alloy steering rack mounts/supports
* One meet old tyres (Ride 3035 on the front and Cross 36 on the rear)
* One meet old Swift Body (used for NSW State Titles)
Also comes with a Futaba 3003 servo, two sets of Sweep Mini Tyres, original box & manual and all you need to get this car going is your own radio gear plus a battery.
Also comes with a few spares such as steering blocks, rear blocks, front spool & body posts.
This car has seen minimal use and is in very good condition.
$250 + Registered post
Price is negotiable (no low ball offers please)
Note - The receiver in the photo's is not included.
This has been blinged to the max and includes the following hop ups (in addition to the standard Pro kit.
* 13T Hobbywing brushless system
* Alloy motor mount
* Tamiya TRF Mini shocks
* Alloy/Carbon Fibre battery brace
* Alloy 2.5 degree rear toe blocks
* Tamiya alloy front shock tower (to provide front shock angle adjustment)
* Tamiya CV drive shafts
* Graphite body post stiffener
* Alloy steering rack mounts/supports
* One meet old tyres (Ride 3035 on the front and Cross 36 on the rear)
* One meet old Swift Body (used for NSW State Titles)
Also comes with a Futaba 3003 servo, two sets of Sweep Mini Tyres, original box & manual and all you need to get this car going is your own radio gear plus a battery.
Also comes with a few spares such as steering blocks, rear blocks, front spool & body posts.
This car has seen minimal use and is in very good condition.
$250 + Registered post
Price is negotiable (no low ball offers please)
Note - The receiver in the photo's is not included.
Last edited by Andrew Barr; 12-28-2010 at 03:49 AM. Reason: Add list of spares
#2
Mini Tyres
Next up for grabs is a complete package of Mini Tyres. This is a combination of new, new/glued and used. All used tyres have only been used for a few heats and have heaps of rubber left.
* Tamiya 60D - Pair (NIB)
* Tamiya 60D (Pair and used for two heats)
* Spice 40R (four tyres) with one pair glued (never used) & one pair NIP
* Ride 3035 tyres NIP (Pair)
* Cross 36 NIP (Pair, with rims)
* Cross 36 (Pair, used for a couple of race meets)
* Shimizu PS0435 NIP (Special rear tyres)
* Shimizu PS0435 (Special rear tyres) used for one heat
* Cross Mini Rims (6 Rims - white)
* Tamiya Rims (Pair, grey coloured)
* Spice Mini inserts (Pair - dark grey - not sure of the hardness)
* Ride Mini inserts - (Pair - Green)
I will also include a fairly new pair of Pit Shimizu tyres (glued on rim), however I am not sure as to what rating they are or what insert has been used.
$78 for the lot including registered post to any major city within Australia.
* Tamiya 60D - Pair (NIB)
* Tamiya 60D (Pair and used for two heats)
* Spice 40R (four tyres) with one pair glued (never used) & one pair NIP
* Ride 3035 tyres NIP (Pair)
* Cross 36 NIP (Pair, with rims)
* Cross 36 (Pair, used for a couple of race meets)
* Shimizu PS0435 NIP (Special rear tyres)
* Shimizu PS0435 (Special rear tyres) used for one heat
* Cross Mini Rims (6 Rims - white)
* Tamiya Rims (Pair, grey coloured)
* Spice Mini inserts (Pair - dark grey - not sure of the hardness)
* Ride Mini inserts - (Pair - Green)
I will also include a fairly new pair of Pit Shimizu tyres (glued on rim), however I am not sure as to what rating they are or what insert has been used.
$78 for the lot including registered post to any major city within Australia.
Last edited by Andrew Barr; 12-27-2010 at 08:21 AM.
#4
Mini parts for sale
Below are some Mini parts for sale and I want to sell as a bulk lot
M05
* 1.5 degree rear toe block
* Alloy steering block + Alloy C Hub with CV drive shaft and bearings (all connected, used and in VGC). Fits M03 as well as M05 (steering block may require ball stud extension for M05 use).
* CV Drive shaft (used and in good condition)
M03 only
* Alloy heat sink
* 2 degree toe blocks
* L+R control arm assemblies for front and rear
For both
* 2 x used gear diffs (still good)
* 2 x BNIP gear box gears
* 1 x Manta Ray ball diff. Needs new cone washers.
* 1 x BNIP TA03 ball diff
Also includes heaps of other out of pack stuff including loose toe blocks, c hubs and arms. These mainly fit the M03M and the original M03.
I would like $65 for the lot, but please note that the TA03 ball diff cost me $25.
Thanks
M05
* 1.5 degree rear toe block
* Alloy steering block + Alloy C Hub with CV drive shaft and bearings (all connected, used and in VGC). Fits M03 as well as M05 (steering block may require ball stud extension for M05 use).
* CV Drive shaft (used and in good condition)
M03 only
* Alloy heat sink
* 2 degree toe blocks
* L+R control arm assemblies for front and rear
For both
* 2 x used gear diffs (still good)
* 2 x BNIP gear box gears
* 1 x Manta Ray ball diff. Needs new cone washers.
* 1 x BNIP TA03 ball diff
Also includes heaps of other out of pack stuff including loose toe blocks, c hubs and arms. These mainly fit the M03M and the original M03.
I would like $65 for the lot, but please note that the TA03 ball diff cost me $25.
Thanks