Box'O'Lubes/glues and Box'O'Bits
#1
Box'O'Lubes/glues and Box'O'Bits
Hey all,
Got heaps of lubes and stuff in a box and also another box with random bits
Box'O'Lube $SOLD:
Shock oils (most near full)
10wt (muchmoore)
20wt (muchmoore)
30wt (Axial)
35wt (Associated - ALMOST EMPTY)
40wt (Associated)
50wt (Associated)
50wt (HPI)
60wt (Associated)
Diff oils
2000wt (Mugen - FULL)
5000wt (Mugen - 3/4)
7000wt (Mugen - FULL)
Tamiya thread lock
HPI thread lock
Axial thread lock
And a whole bunch of greases/lubes etc (see pic)
Box'O'Bits $SOLD
IN THE PLASTIC CONTAINER
-Screws, bearings, washers, orings, hex nuts, spacers
-Heaps of servo arms (including Dubro ultra strong ones)
-Spurs
-AA and AAA receiver boxes
-deans plaug
-2 X Deans to tamiya adapters
-Body hole markers (point things that sit on body posts)
-Body clips (long and short)
-Shrink tubes
OTHER STUFF INCLUDED:
-Drift wheels (with ABS tyres)
-Xceed camber gauge (screw holding it at 1 degree but can be removed)
-4 Cheap servos (one might not work... no way to test sorry)
-Fuel line
-Antenna tubes
-Masking tape for bodies
-Pin stripe tape for painting bodies
-1/4 bottle of Bob Dively liquid mask
-Exhaust rubber
-Heaps of allen keys
-Heaps of assorted turnbuckle wrenches
-Glow plug wrench
-Assorted wheel and other nut tools
-Roll of clear 2 inch shrink wrap (used this for micro lipos)
-Heaps of soft silicone wire and other wires and plugs
PM me if you want either box. Not going to seperate sorry.
Got heaps of lubes and stuff in a box and also another box with random bits
Box'O'Lube $SOLD:
Shock oils (most near full)
10wt (muchmoore)
20wt (muchmoore)
30wt (Axial)
35wt (Associated - ALMOST EMPTY)
40wt (Associated)
50wt (Associated)
50wt (HPI)
60wt (Associated)
Diff oils
2000wt (Mugen - FULL)
5000wt (Mugen - 3/4)
7000wt (Mugen - FULL)
Tamiya thread lock
HPI thread lock
Axial thread lock
And a whole bunch of greases/lubes etc (see pic)
Box'O'Bits $SOLD
IN THE PLASTIC CONTAINER
-Screws, bearings, washers, orings, hex nuts, spacers
-Heaps of servo arms (including Dubro ultra strong ones)
-Spurs
-AA and AAA receiver boxes
-deans plaug
-2 X Deans to tamiya adapters
-Body hole markers (point things that sit on body posts)
-Body clips (long and short)
-Shrink tubes
OTHER STUFF INCLUDED:
-Drift wheels (with ABS tyres)
-Xceed camber gauge (screw holding it at 1 degree but can be removed)
-4 Cheap servos (one might not work... no way to test sorry)
-Fuel line
-Antenna tubes
-Masking tape for bodies
-Pin stripe tape for painting bodies
-1/4 bottle of Bob Dively liquid mask
-Exhaust rubber
-Heaps of allen keys
-Heaps of assorted turnbuckle wrenches
-Glow plug wrench
-Assorted wheel and other nut tools
-Roll of clear 2 inch shrink wrap (used this for micro lipos)
-Heaps of soft silicone wire and other wires and plugs
PM me if you want either box. Not going to seperate sorry.
Last edited by HaraR40; 10-24-2010 at 04:30 AM.