R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Ask Hitec (https://www.rctech.net/forum/ask-hitec-40/)
-   -   Servo noise and twitching (https://www.rctech.net/forum/ask-hitec/342235-servo-noise-twitching.html)

Jim1222 11-06-2009 07:55 AM
Servo noise and twitching
 
I just installed the 2.4 GHz module in my Eclipse transmitter. Using the Optima 7 receiver during initial setup, my servos ( both Hitec & Spektrum) make noises and twitch. The twitching may be due to the load caused by the noisy servos. The noises are without connection of the servos to the flying surfaces or connected. Have I missed something in the changeover and setup of the 2.4 GHz?

A.T. 11-15-2009 10:53 PM
Originally Posted by Jim1222 (Post 6571945)
I just installed the 2.4 GHz module in my Eclipse transmitter. Using the Optima 7 receiver during initial setup, my servos ( both Hitec & Spektrum) make noises and twitch. The twitching may be due to the load caused by the noisy servos. The noises are without connection of the servos to the flying surfaces or connected. Have I missed something in the changeover and setup of the 2.4 GHz?
With almost all known systems, servos give a slight twitch when power is first provided on start up, this pending link to TX. This should not be continuous - you do turn the TX On First - Off Last as per TX manuals? and set fail safe?
With regard to Hitech Aurora, 2.4Ghz Spectra Pro & Optima RX FAQ, please refer to: Aurora 9 Mixes, Setups, Tips, Undocumented Features.

Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links


All times are GMT -7. It is currently 09:04 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.