Arizona RC Swap Meet
12-10-2012, 09:18 AM
#2671
FS Tekin hot wire.. $25.00
Text me ^^
Text me ^^
12-10-2012, 09:40 AM
#2672
FS, three used receiver packs proteck lipos 2300mah, two orion 1600's and one losi lipo regulator.. $45.00 for it all!!
text me 602 509 5538
http://www.amainhobbies.com/product_...-Balancer-Plug
text me 602 509 5538
http://www.amainhobbies.com/product_...-Balancer-Plug
12-10-2012, 09:43 AM
#2673
FS, My Baby!!
Factory Team RC-10 SC no body.. I rebuilt the entire truck diffs, shocks the whole truck is ready to go!
It has a great out door set up on it..
first class all the way $120.00 takes her..
Text me 602 509 5538
Factory Team RC-10 SC no body.. I rebuilt the entire truck diffs, shocks the whole truck is ready to go! It has a great out door set up on it..
first class all the way $120.00 takes her..
Text me 602 509 5538
12-10-2012, 10:04 AM
#2674
12-10-2012, 10:17 AM
#2675
DEX410v3
DEX410 v3 - I think.
This one has all the bells and whistles on it, big bores and a bunch of alum hop ups.
Wanting $325 for roller with Orion 6.5T motor - no other electronics.
or $300 just for roller - no electronics/motor
Trades - DESC210r or DEST210r
This one has all the bells and whistles on it, big bores and a bunch of alum hop ups.
Wanting $325 for roller with Orion 6.5T motor - no other electronics.
or $300 just for roller - no electronics/motor
Trades - DESC210r or DEST210r
12-10-2012, 11:53 AM
#2676
SC10 FT 2wd roller
SOLD
**SALE PENDING with Alky350**
For sale (No trades). SC10 Factory Team 2wd roller. Truck only has less than 10 race nights of use on roller. Truck is super clean and fresh. Shocks were just rebuilt with new seals and oil, and tranny and diff were cleaned, diff has sanded and polished diff rings and thrust rings, Diff is SMOOTH! Have the original manual, box, 81/84 spurs, body, misc parts. Comes with new front/rear a-arms, new body mounts, rear sway bar kit, factory team front/rear spring kits (all springs had the top of the springs grinded down so they don't rub the shock bodies when cycled on the shock). The servo saver was glued and also has proline rear 12mm hex adapters.
Included Tires and wheels: All wheels are the Proline Yellow Renegade wheels for the sc10, fronts are bearing style and rears are 12mm hex style.
2 pairs of NEW rear wheels.
1 pair of front and 1 pair of rear used (actoned) wheels.
Tire pairs mounted on rear wheels:
-Jconcept Subcultures (green) Jconcept foam, 95%+ tread left
-Aka Enduro (ss) red aka foam, 75% tread left
-Aka Gridiron (ss) red aka foam, 75% tread left
-AKA Gridiron (s) red aka foam, 85% tread left
Tire pairs mounted on front wheels:
-Aka Gridirons (s) black aka foam, 90% tread left
-Aka Enduro (s) black aka foam, 95% tread left
-Aka Cityblock (s) black aka foam, 80% tread left
-Proline Slicer SC (m2) proline foam, 95% tread left
SOLD $160-FIRM SOLD
**SALE PENDING with Alky350**
For sale (No trades). SC10 Factory Team 2wd roller. Truck only has less than 10 race nights of use on roller. Truck is super clean and fresh. Shocks were just rebuilt with new seals and oil, and tranny and diff were cleaned, diff has sanded and polished diff rings and thrust rings, Diff is SMOOTH! Have the original manual, box, 81/84 spurs, body, misc parts. Comes with new front/rear a-arms, new body mounts, rear sway bar kit, factory team front/rear spring kits (all springs had the top of the springs grinded down so they don't rub the shock bodies when cycled on the shock). The servo saver was glued and also has proline rear 12mm hex adapters.
Included Tires and wheels: All wheels are the Proline Yellow Renegade wheels for the sc10, fronts are bearing style and rears are 12mm hex style.
2 pairs of NEW rear wheels.
1 pair of front and 1 pair of rear used (actoned) wheels.
Tire pairs mounted on rear wheels:
-Jconcept Subcultures (green) Jconcept foam, 95%+ tread left
-Aka Enduro (ss) red aka foam, 75% tread left
-Aka Gridiron (ss) red aka foam, 75% tread left
-AKA Gridiron (s) red aka foam, 85% tread left
Tire pairs mounted on front wheels:
-Aka Gridirons (s) black aka foam, 90% tread left
-Aka Enduro (s) black aka foam, 95% tread left
-Aka Cityblock (s) black aka foam, 80% tread left
-Proline Slicer SC (m2) proline foam, 95% tread left
SOLD $160-FIRM SOLD
Last edited by Jerad8; 12-19-2012 at 05:37 PM.
12-10-2012, 01:28 PM
#2677
Tech Initiate
Brand new Sc10rs price lowered $175obo
Txt 602 614 6088
12-10-2012, 02:40 PM
#2679
12 full sets of 1/8 buggy tires most 95% with one run, Calibers, Enduros, digets, revolvers and med pins mostly and M3 compound with closed cells mostly. I can get a list later if needed.
Selling as a complete lot only and will not break up at this time.
$200 for 48 almost new tires = a sweet deal.
Willing to trade for a B4.1 RTR or a couple of B4 rollers or another SC10 or T4 ARTR.
Added bonus if you want the fuel 30%and it doesn't sell first I will give it to you but only with the tire purchase, will sell for $20 for approx. 1.5 gallons
Can meet on Tue/Thurs in Oro Valley or Comp. Hobbies area
$200 for all of them including the Dialed tubes.
Selling as a complete lot only and will not break up at this time.
$200 for 48 almost new tires = a sweet deal.
Willing to trade for a B4.1 RTR or a couple of B4 rollers or another SC10 or T4 ARTR.
Added bonus if you want the fuel 30%and it doesn't sell first I will give it to you but only with the tire purchase, will sell for $20 for approx. 1.5 gallons
Can meet on Tue/Thurs in Oro Valley or Comp. Hobbies area
12-10-2012, 03:49 PM
#2680
Nice Team Associated FT B4.1+8mm
Have a nice Team Associated FT B4.1+8mm with a custom painted JConcepts Punisher body. Everything is in really good shape, I put the +8 chassis on it, had the body painted and never used it. $150 for the roller(no electronics) and a stock in good shape body (metallic blue). If you want the custom painted body and two new JConcepts Wings(still in the package) add another $35.
12-10-2012, 04:15 PM
#2681
SOLD
For sale (no trades) Losi Mini Rock Crawler Pro Roller 1/18 scale (LOSA0101). Roller is Brand NEW, never used, It does however include a set of Lightly Used MIP Center CVD drivelines (#09100) Installed. The 2 small set screws .05" had the driver tips break off in the set screws on both ends of the tranny output shafts when installing them, so if you ever wanted to put the stock plastic drivelines back on then you will need to buy (x2 5x9x3mm bearings and LOSB1436 Losi output shaft set). Also installed is a set of Losi Aluminum rear Hub Carriers (LOSB1423). This is a roller (no motor, esc, servo, receiver, radio or battery included).
SOLD $80-FIRM SOLD
For sale (no trades) Losi Mini Rock Crawler Pro Roller 1/18 scale (LOSA0101). Roller is Brand NEW, never used, It does however include a set of Lightly Used MIP Center CVD drivelines (#09100) Installed. The 2 small set screws .05" had the driver tips break off in the set screws on both ends of the tranny output shafts when installing them, so if you ever wanted to put the stock plastic drivelines back on then you will need to buy (x2 5x9x3mm bearings and LOSB1436 Losi output shaft set). Also installed is a set of Losi Aluminum rear Hub Carriers (LOSB1423). This is a roller (no motor, esc, servo, receiver, radio or battery included).
SOLD $80-FIRM SOLD
Last edited by Jerad8; 12-27-2012 at 02:51 PM.
12-10-2012, 04:29 PM
#2682
SOLD
My dad is selling (no trades) his Losi 1/10 Comp Crawler Roller. He literally only used it once so its clean and lightly used condition. Has original box and manual, stock tires have 95%+ tread and roller has barley any scratches. Also comes with the following new in package parts:
x2 LOSA3175 Worm Pinion Drive Gear
x2 LOSA3174 Worm Gear Spool
x4 LOSA3192 Front CV Drive Shaft
x2 LOSA3166 Transmission Molded Gear Set
x1 LOSA3193 Center Drive Shaft Yoke, Cup and Hardware
x1 LOSA3168 Molded Drive Shaft Set
This is a roller (no motor, esc, servo, receiver, radio or battery included).
SOLD $150-FIRM SOLD
My dad is selling (no trades) his Losi 1/10 Comp Crawler Roller. He literally only used it once so its clean and lightly used condition. Has original box and manual, stock tires have 95%+ tread and roller has barley any scratches. Also comes with the following new in package parts:
x2 LOSA3175 Worm Pinion Drive Gear
x2 LOSA3174 Worm Gear Spool
x4 LOSA3192 Front CV Drive Shaft
x2 LOSA3166 Transmission Molded Gear Set
x1 LOSA3193 Center Drive Shaft Yoke, Cup and Hardware
x1 LOSA3168 Molded Drive Shaft Set
This is a roller (no motor, esc, servo, receiver, radio or battery included).
SOLD $150-FIRM SOLD
Last edited by Jerad8; 12-29-2012 at 05:41 PM.
12-10-2012, 04:43 PM
#2683
300 american dollars?
12-10-2012, 05:06 PM
#2684
12-10-2012, 05:21 PM
#2685
Spektrum DX7 LNIB
$180
Spektrum AR6110E LNIB
$40
$200 for both.
Located in Casa Grande. Can meet in the valley.