Cool Can Fan Talk
#481
Tech Regular
Originally Posted by TheCoolCanFanMan
Good to hear you guys were happy with the CCF, are you guy's having your fans blowing on both of them, or having it suck over the kan? I have mine sucking over the kan and find it to work very well.
#482
Originally Posted by Boosta
Ouch!! Mine are blowing at the mo will flip em over see how that goes on friday.
girl you got to let me know should i SUCK or should i BLOW!!!
girl you got to let me know should i SUCK or should i BLOW!!!
Malc TCCFBM
#483
Originally Posted by TheCoolCanFanMan
lol just turn over the kan fan, Im a poet and didn't know it
Malc TCCFBM
Malc TCCFBM
#484
Originally Posted by part-time racer
Because of the motor position when mounted into the 007, the cooling vents on the kan are inline with the chassic (side to side rather then top and bottom) so I have the one over the kan blowing and the one over the end bell sucking. This seems to work ok.
Must be hard to drive with that going on
#485
I have the one on the can sucking and the one on the endbell blowing. Make sure you space the fan away from the mount if you flip it over to suck, on mine i was breaking blades off because they hit the mount in a crash. I've spaced it up about 1mm and its fine now.
#486
Tech Regular
Originally Posted by Boosta
so what your saying is you've got one sucking on your end bell!!!
Must be hard to drive with that going on
Must be hard to drive with that going on
Just started striping the 007 down to flush all them bearings. Should go even faster next time.
I'm coming for ya rob and I'm bring dion with me.
#487
Originally Posted by Robfo
I have the one on the can sucking and the one on the endbell blowing. Make sure you space the fan away from the mount if you flip it over to suck, on mine i was breaking blades off because they hit the mount in a crash. I've spaced it up about 1mm and its fine now.
NOW I KNOW WHY MINE IS BROKE I have not spaced mine, and im sposed to be the C L CAN FAN MAN Still you learn by mistakes, I got married ooch ouch slap smack OK DEAR I still love you
Cheers Malc THE BROKEN MAN
#488
Originally Posted by part-time racer
Yes its true. But if you concentrate real hard and don't look down, alls good. And generally you don't end up with a big mess after 5 minutes.
Just started striping the 007 down to flush all them bearings. Should go even faster next time.
I'm coming for ya rob and I'm bring dion with me.
Just started striping the 007 down to flush all them bearings. Should go even faster next time.
I'm coming for ya rob and I'm bring dion with me.
Malc The I cant last that long man
#489
Originally Posted by part-time racer
Yes its true. But if you concentrate real hard and don't look down, alls good. And generally you don't end up with a big mess after 5 minutes.
Just started striping the 007 down to flush all them bearings. Should go even faster next time.
I'm coming for ya rob and I'm bring dion with me.
Just started striping the 007 down to flush all them bearings. Should go even faster next time.
I'm coming for ya rob and I'm bring dion with me.
PTR did you come across any problems with the bearings been hearing a few people complain about them drying out? (even after the instructions to oil them when building the kit!!)
#490
Originally Posted by Robfo
I have the one on the can sucking and the one on the endbell blowing. Make sure you space the fan away from the mount if you flip it over to suck, on mine i was breaking blades off because they hit the mount in a crash. I've spaced it up about 1mm and its fine now.
#491
Originally Posted by Boosta
Rob are you flipping the mount over or the fan itself ?
Its just the fan you flip, but as Rob says, space it away from the mount about 1mm as the blades touch the opening of the mount IF you have a woopsy
Cheers Malc TCCFM
#492
Originally Posted by TheCoolCanFanMan
Boosta
Its just the fan you flip, but as Rob says, space it away from the mount about 1mm as the blades touch the opening of the mount IF you have a woopsy
Cheers Malc TCCFM
Its just the fan you flip, but as Rob says, space it away from the mount about 1mm as the blades touch the opening of the mount IF you have a woopsy
Cheers Malc TCCFM
#493
When you flip the fan and space it up from the mount remember that you'll need to file the spacers down so the fan doesnt hit them aswell.
It'll become clear when you have a look at your fan what hits where.
It'll become clear when you have a look at your fan what hits where.
#494
Tech Regular
Originally Posted by Boosta
Grrrrr let me at him, let at him!!!
PTR did you come across any problems with the bearings been hearing a few people complain about them drying out? (even after the instructions to oil them when building the kit!!)
PTR did you come across any problems with the bearings been hearing a few people complain about them drying out? (even after the instructions to oil them when building the kit!!)
#495
007 CCF
Hi Rich
Cant seem to find the spec you sent me on the lengths of the 007 CCF's standoffs, would one enlighten one please A,S,A,P,P,
Cheers Malc THE OK YA MAN
Cant seem to find the spec you sent me on the lengths of the 007 CCF's standoffs, would one enlighten one please A,S,A,P,P,
Cheers Malc THE OK YA MAN