speedxl

hey whats up cracker!

whats going on dick see you havent been blown away with the tornados.
hey you getting ready for the snow birds again!

rudster

Does the original HPI Pro4 topdeck still fit on the BMI conversion

RBLove

iTrader: (90)

Hey Dick'n. How's it going brutha?

It is definitely tight. My receiver is under the top deck. I am running the tiny Helios receiver with a KO VFS2000. I will snap a pic.....

Brian,

I will post my set up on here later.

StewartFan20

iTrader: (4)

Is there a time line as to when the Pro4 BMI chassis will be available?

rayhuang

iTrader: (5)

I am tossing around the idea of selling my complete BMI Pro4 with all spares, etc. Its mint. Keep an eye out on the RCTech for sale sections if I decide to pulll the trigger soon on it. I am starting to think of going back to my BMI eTC3 and BMI Xray.

Ray

wyd

iTrader: (51)

I think they are actually ready for production. Jason is more than likely waiting for more graphite as he just can't keep it in stock as BMI is selling faster than a speeding locomotive and able to leap tall buildings in a single bound!!!!!!!!!

wyd

iTrader: (51)

Ray I just beat ya. I pulled the trigger and have my BMI Pro 4 up for sale. I'm working on some other BMI Stuff right now.

John Fontaine

iTrader: (2)

You guys and car swapping. It's like partner swapping

I've stuck with one car only.... XRAY! I found out nothing that performs better.

wyd

iTrader: (51)

You will once you try out my new car!!!!!!!!

rayhuang

iTrader: (5)

Are you revealing something you shouldn't John....

Yeah-I change cars with the change of seasons!! But I will stick to one car during the "winter" carpet season. Last few years has always been the FTTC3, Warpspeed TC3 and then the BMI TC3.

But I have tried and tested them all (losi-XXXs, G+, Tamiya EvoIII, Xray-Evo2, PB, T1, FOC, Short arm, HPI Pro4), but the spring and summer is PLAY TIME!!!

Ray

John Fontaine

iTrader: (2)

Haha - Good luck with all the changes guys.
WYD - we'll see how that cuda goes

StewartFan20

iTrader: (4)

What is the cost for the Pro4 BMI chassis and how would I order one?

JDM_DOHC_SiR

iTrader: (31)

Just got the 2 that I ordered 3 days ago and I paid 109~110ish for each chassis set
-Dave

JDM_DOHC_SiR

iTrader: (31)

WYD ..next time you talk with Jason...Just ask hime what Dave Bristol is sending him to play with..PM me if you want the skinny
-Dave

RBLove

iTrader: (90)

X-Ray FK BMI equipped carpet set up

Front:
2 holes open with X-Ray 30 wt. oil
middle on tower
6 degree caster blocks
anti-dive (front lowest hole and rear in the middle)
1.5 mm up travel
33 lb X-Ray spring
-2 camber
camber is short (down and out)
diff setting kind of tight
ackerman is stock (inside on swing rack and outside on hub)

Rear:
3 holes open with X-Ray 30 wt. oil
out on the arm and in one on tower
camber link is stock on bulkhead and inner on hub
arms flat and in lowest position
1.5 rear toe
-2 camber
3mm up travel
28 lb. X-Ray spring
wheel base is stock setting (big spacer in front)
diff setting loose

Alfa
BSR purple/orange and purple
BMI 3mm chassis/solid top deck/3mm shock towers (battery slots are about a full cell forward and slightly closer to center. Car is PERFECTLY balanced on the Hudy balancing tools.