Maj. Teeth

Ok, I'm getting a little antsy and since some of you guys brought it up. I might go up to race/watch. My question is, Matt Howard, James Arluck, RCzombie and all those NorCal friends, any of you willing to take me drinking afterward?

Dan

mb racer

iTrader: (1)

I saw what you looked like in the pic on the couch.. you sure you need another drink ???j/k

dr_hfuhuhurr

iTrader: (95)

I've heard some buzz about the Rayspeed discharger. What's so special about that one over my Trinity Realtime 2. Other than the obvious, the Rayspeed is not made by big t?

Blake

Jon Kerr

iTrader: (17)

Does the realtime cut off at .90v per cell. I think it takes them down to 0v like most of the others.

DavidAlford

iTrader: (32)

The Trinity realtime? It takes them down to zero as far as I know. Least thats what I always thought.

Sal Amato

iTrader: (27)

I have a realtimee 2 tray. I just remove packs when the lights go out.Thats what it says right on the tray itself not really sure if it has a specific cut off.seeing that there is lights bulbs and a fan the tray will probably just drain batteries until the power is not sufficient enough to run the fan ,Who knows what that is.

Sal Amato

iTrader: (27)

The rayspeed discharger has a cutoff ,speedtech has them on there website with some specs.

TSR6

iTrader: (5)

sns - realtime2 takes the cells down to zero, it is a pure resistor equalizer. You want to take the cells off when the bulbs go out for GP cells, unless you want to deadshort the cells.

KevanB

Does the Pro Match Racing Smart Tray 2 have auto cut off? It doesnt look like it does. All I see on it are diodes and resistors.

Matt Howard

iTrader: (6)

IMO the Rayspeed discharger is the best out there right now. It's adjustable from a 5 amp to 1 amp discharge and the cutoff is adjustable from .9 per cell to .1 per cell

Randy Caster

iTrader: (47)

You better make this one Dan man Let me know if you'll want to ride up there in the Subie or if you'll make it up there later in the weekend.

JohnMatrix

And they aready ship me my premade batteries, this place fing rocks!

mike_Webb

I got one of the Rayspeed Dischargers at Snowbirds. What I have noticed is that when I was charging my packs down there, when I did not deadshort them I was getting anywhere from 3750MAH to 3995MAH. My deadshorted cells get usually 3600MAH - 3700MAH. It didn't matter if it was the first charge or the second Charge. I now equalize all my packs before the first charge and the second charge for the day. If I want to deadshort them then I throw them on my Integy discharger that takes them down to 0.

Before I would take my cells down till my Integy Disharger Bulbs would go out and then I would charge them for the first charge of the day. After the Run I would take it down to 5.4volts on my GFX and charge them a second time. That way I was getting about 3500MAH on the first Charge and about 3300-3400MAH on the second Charge

Matt Howard

iTrader: (6)

I don't think that would be a problem I have to drive back friday after practice for my daughters birthday but I'll probably get a hotel room with a couple friends for saturday night. I'll let you know where we're staying so you can stay there too

Joe B

iTrader: (1)

Hey Kevin, if memory serves me right...(it's been a while since I had one) the pro-match smart trey discharges at .75amps with a cutoff at .9 volts.......